Search Results

Standard

AIRCRAFT INSTRUMENT AND INSTRUMENT SYSTEM STANDARDS: WORDING TERMINOLOGY, PHRASEOLOGY, ENVIRONMENT AND DESIGN STANDARDS FOR

1981-01-15

HISTORICAL

AIR818C

This AS covers __________ which measure and display __________ or This AS covers __________ basic types of (no capitals) instruments as follows: Note: Each type number to be followed by a brief description as it would if the scope were covering only a single type. As many types as required may be used.

Standard

AIRCRAFT INSTRUMENT STANDARDS: WORDING, TERMINOLOGY, PHRASEOLOGY AND ENVIRONMENTAL AND DESIGN REQUIREMENTS FOR

1991-05-01

HISTORICAL

AIR818

This Aerospace Standard covers ______________________________________________.

Standard

AIRCRAFT INSTRUMENT STANDARDS: WORDING, TERMINOLOGY, PHRASEOLOGY, ENVIRONMENT AND DESIGN STANDARDS FOR

1972-01-01

HISTORICAL

AIR818B

This Aerospace Standard covers ____________________ or SCOPE This Aerospace Standard covers ____________________ basic types of (no capitals) instruments as follows: NOTE: Each type number to be followed by a brief description. As many types as required may be used.

Standard

AIRSPEED INSTRUMENTS

1987-05-01

HISTORICAL

AS8019

This standard covers Airspeed Instruments which display airspeed of an aircraft, as follows:

Standard

AUTOMATIC PILOT INSTALLATIONS

1991-05-01

HISTORICAL

ARP419

These recommendations cover the mechanical and electrical installation and installation test procedures for automatic pilots of the type normally used in transport type aircraft. The material in this ARP does not supercede any airworthiness requirement in the Civil Air Regulations.

Standard

Accelerometer Group, Counting (MS25447 and MS25448)

1999-07-01

HISTORICAL

AS22145

This specification covers the design and performance requirements for a single axis, four load-factor level counting accelerometer group referred to hereafter as “equipment.”

Standard

Accelerometer Group, Counting (MS25447 and MS25448)

2012-08-22

CURRENT

AS22145A

This specification covers the design and performance requirements for a single axis, four load-factor level counting accelerometer group referred to hereafter as “equipment.”

Standard

Air Data Computers, MPS

2008-02-16

CURRENT

AS417A

This Standard covers air data equipment (hereinafter designated the instrument) which when connected to sources of aircraft electrical power, static pressure, total pressure and outside air temperature (singly or in combination) provides some or all of the following computed air data output signals: Pressure Altitude* Total Temperature* Pressure Altitude (Reporting) Altitude Rate Baro-Corrected Pressure Altitude* Overspeed Warning Vertical Speed* Altitude Hold Computed Airspeed* Airspeed Hold Mach Number* Mach Hold Maximum Allowable Airspeed* qc (impact pressure) Static Air Temperature (*when used as an alternate for total temperature) True Airspeed Others

Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2008-02-16

HISTORICAL

AIR818D

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2020-02-20

CURRENT

AIR818E

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

Standard

Altimeter, Pressure, Compensated (Turbine Powered Subsonic Aircraft)

2008-02-16

CURRENT

AS415

This Aerospace Standard covers two types of compensated altimeters which indicate, by visual means, the pressure altitude compensated for the static pressure system errors of the aircraft.

Standard

Attitude Instruments, Pitch and Roll Part I Minimum Performance Standard for Equipment

2008-02-16

CURRENT

AS1162

This Aerospace Standard covers two basic types of pitch and roll indicating instruments as follows: Type I: Direct coupled to gyro Type II: Electrical repeating

Standard

Automatic Pilots (Turbine Powered Subsonic Aircraft)

2020-12-22

CURRENT

AS440B

This SAE Aerospace Standard (AS) covers automatic pilots intended for use on aircraft to automatically operate the primary and trim aerodynamic controls to maintain stable flight and/or to provide maneuvering about any of the three axes through servo control. Automatic control functions essential for primary or augmented flight control are excluded.

Standard

Barometry for Altimeter Calibration

2020-02-20

CURRENT

AIR1075B

This SAE Aerospace Information Report (AIR) is concerned only with aspects directly relating to available accuracy. While well-designed photoelectric, inductive or capacitive readers and pressure regulators, and other accessories are highly desirable for convenience and production rate, they are considered to be outside the scope of this AIR.

Standard

COMPASS SYSTEM INSTALLATIONS

1991-05-01

HISTORICAL

ARP426

These recommendations cover the mechanical and electrical installation and installation test procedures for Compass Systems of the type normally used in transport type aircraft. The recommendations in the ARP do not supersede any airworthiness requirements in Civil Air Regulations.

Standard

Compass System Installations

2008-02-16

HISTORICAL

ARP426A

These recommendations cover the mechanical and electrical installation and installation test procedures for Compass Systems of the type normally used in transport type aircraft. The recommendations in the ARP do not supersede any airworthiness requirements in Civil Air Regulations.

Standard

DESIGN AND INSTALLATION OF PITOT-STATIC SYSTEMS FOR TRANSPORT AIRCRAFT

1968-10-01

HISTORICAL

ARP920

This Aerospace Recommended Practice covers the design and installation requirements for pitot-static systems.

Standard

DESIGN AND INSTALLATION OF PITOT-STATIC SYSTEMS FOR TRANSPORT AIRCRAFT

1996-10-01

CURRENT

ARP920A

This SAE Aerospace Recommended Practice (ARP) covers the design and installation requirements for pitot-static systems.

Standard

DIRECTIONAL INDICATING SYSTEM (TURBINE POWERED SUBSONIC AIRCRAFT)

1991-05-01

HISTORICAL

ARP416

This recommended practice covers the requirements for gyroscopically stabilized Directional Indicating Systems, which will operate as a 1°/hour latitude corrected, free directional gyro or as a slaved gyro, magnetic compass with 1/2° accuracy.

Standard

Directional Indicating System (Turbine Powered Subsonic Aircraft)

2020-04-14

CURRENT

ARP416B

This recommended practice covers the requirements for gyroscopically stabilized Directional Indicating Systems, which will operate as a 1°/hour latitude corrected, free directional gyro or as a slaved gyro, magnetic compass with 1/2° accuracy.