Search Results

This Aerospace Standard covers an air data computer characterized by the concept of transducing and computing the majority of air data requirements for an aircraft. The display instruments and other using subsystems are not considered in this scope except where they perform computing operations for output parameters as covered by this specification. The computer may accept the inputs and provide the outputs listed in paragraphs 2.1 and 2.2 respectively. The computer may also provide an altitude encoder output for IFF Mark X ¯ ¯ (SIF)/Air Traffic Control Radar Beacon System SIF/ATCRBS; in which case AS 855* "Altitude Device Providing Outputs for Automatic Pressure Altitude Reporting" shall be referred to for applicable minimum standards. (Note - Reference to air data computer in subsequent paragraphs will be designated as "instrument".)

This AS covers __________ which measure and display __________ or This AS covers __________ basic types of (no capitals) instruments as follows: Note: Each type number to be followed by a brief description as it would if the scope were covering only a single type. As many types as required may be used.

This Aerospace Standard covers ____________________ or SCOPE This Aerospace Standard covers ____________________ basic types of (no capitals) instruments as follows: NOTE: Each type number to be followed by a brief description. As many types as required may be used.

This standard covers Airspeed Instruments which display airspeed of an aircraft, as follows:

These recommendations cover the mechanical and electrical installation and installation test procedures for automatic pilots of the type normally used in transport type aircraft. The material in this ARP does not supercede any airworthiness requirement in the Civil Air Regulations.

This Aeronautical Standard covers Automatic Pilots intended for use on aircraft to automatically operate the aerodynamic controls to maintain flight and/or to provide maneuvering about the three axes through servo control.

This specification covers all gyroscopic and servo control types of automatic pilots intended for use on aircraft to operate automatically the control surfaces of the aircraft to maintain a stabilized flight attitude with respect to the longitudinal, lateral and vertical axes, and to provide for maneuvering the airplane through servo control.

This SAE Aerospace Standard (AS) covers automatic pilots intended for use on aircraft to automatically operate the primary and trim aerodynamic controls to maintain stable flight and/or to provide maneuvering about any of the three axes through servo control. Automatic control functions essential for primary or augmented flight control are excluded.

This Aerospace Standard covers Automatic Pilots intended for use on aircraft to automatically operate the primary and trim aerodynamic controls to maintain stable flight and/or to provide maneuvering about any of the three axes through servo control. Automatic control functions essential for primary or augmented flight control are excluded.

This specification covers the design and performance requirements for a single axis, four load-factor level counting accelerometer group referred to hereafter as “equipment.”

This specification covers the design and performance requirements for a single axis, four load-factor level counting accelerometer group referred to hereafter as “equipment.”

This Standard covers air data equipment (hereinafter designated the instrument) which when connected to sources of aircraft electrical power, static pressure, total pressure and outside air temperature (singly or in combination) provides some or all of the following computed air data output signals: Pressure Altitude* Total Temperature* Pressure Altitude (Reporting) Altitude Rate Baro-Corrected Pressure Altitude* Overspeed Warning Vertical Speed* Altitude Hold Computed Airspeed* Airspeed Hold Mach Number* Mach Hold Maximum Allowable Airspeed* qc (impact pressure) Static Air Temperature (*when used as an alternate for total temperature) True Airspeed Others

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

This Aerospace Standard covers two types of compensated altimeters which indicate, by visual means, the pressure altitude compensated for the static pressure system errors of the aircraft.

This Aerospace Standard covers two basic types of pitch and roll indicating instruments as follows: Type I: Direct coupled to gyro Type II: Electrical repeating

These recommendations cover the mechanical and electrical installation and installation test procedures for automatic pilots of the type normally used in transport type aircraft. The material in this ARP does not supercede any airworthiness requirement in the Civil Air Regulations.

These recommendations cover the mechanical and electrical installation and installation test procedures for automatic pilots of the type normally used in transport type aircraft. The material in this ARP does not supercede any airworthiness requirement in the Civil Air Regulations.

This Aeronautical Standard covers Automatic Pilots intended for use on aircraft to automatically operate the aerodynamic controls to maintain flight and/or to provide maneuvering about the three axes through servo control.

This Aeronautical Standard covers Automatic Pilots intended for use on aircraft to automatically operate the aerodynamic controls to maintain flight and/or to provide maneuvering about the three axes through servo control.