Search Results

Standard

AIRCRAFT INSTRUMENT AND INSTRUMENT SYSTEM STANDARDS: WORDING TERMINOLOGY, PHRASEOLOGY, ENVIRONMENT AND DESIGN STANDARDS FOR

1981-01-15

HISTORICAL

AIR818C

This AS covers __________ which measure and display __________ or This AS covers __________ basic types of (no capitals) instruments as follows: Note: Each type number to be followed by a brief description as it would if the scope were covering only a single type. As many types as required may be used.

Standard

AIRCRAFT INSTRUMENT STANDARDS: WORDING, TERMINOLOGY, PHRASEOLOGY, ENVIRONMENT AND DESIGN STANDARDS FOR

1972-01-01

HISTORICAL

AIR818B

This Aerospace Standard covers ____________________ or SCOPE This Aerospace Standard covers ____________________ basic types of (no capitals) instruments as follows: NOTE: Each type number to be followed by a brief description. As many types as required may be used.

Standard

AIRSPEED INSTRUMENTS

1987-05-01

HISTORICAL

AS8019

This standard covers Airspeed Instruments which display airspeed of an aircraft, as follows:

Standard

AUTOMATIC PILOT INSTALLATIONS

1991-05-01

HISTORICAL

ARP419

These recommendations cover the mechanical and electrical installation and installation test procedures for automatic pilots of the type normally used in transport type aircraft. The material in this ARP does not supercede any airworthiness requirement in the Civil Air Regulations.

Standard

Accelerometer Group, Counting (MS25447 and MS25448)

1999-07-01

HISTORICAL

AS22145

This specification covers the design and performance requirements for a single axis, four load-factor level counting accelerometer group referred to hereafter as “equipment.”

Standard

Accelerometer Group, Counting (MS25447 and MS25448)

2012-08-22

CURRENT

AS22145A

This specification covers the design and performance requirements for a single axis, four load-factor level counting accelerometer group referred to hereafter as “equipment.”

Standard

Air Data Computers, MPS

2008-02-16

CURRENT

AS417A

This Standard covers air data equipment (hereinafter designated the instrument) which when connected to sources of aircraft electrical power, static pressure, total pressure and outside air temperature (singly or in combination) provides some or all of the following computed air data output signals: Pressure Altitude* Total Temperature* Pressure Altitude (Reporting) Altitude Rate Baro-Corrected Pressure Altitude* Overspeed Warning Vertical Speed* Altitude Hold Computed Airspeed* Airspeed Hold Mach Number* Mach Hold Maximum Allowable Airspeed* qc (impact pressure) Static Air Temperature (*when used as an alternate for total temperature) True Airspeed Others

Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2008-02-16

HISTORICAL

AIR818D

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

Standard

Aircraft Instrument and Instrument System Standards: Wording Terminology, Phraseology, Environment and Design Standards For

2020-02-20

CURRENT

AIR818E

This Aerospace Standard, (AS), specifies minimum performance standards for _____________ (Instrument or instrument systems) which are primarily intended for use with (vehicles capable of flight), ((fixed wing, rotary wing) aircraft)), (other special modifiers); (and whose purpose is to display _____________ information).

Standard

Attitude Instruments, Pitch and Roll Part I Minimum Performance Standard for Equipment

2008-02-16

CURRENT

AS1162

This Aerospace Standard covers two basic types of pitch and roll indicating instruments as follows: Type I: Direct coupled to gyro Type II: Electrical repeating

Standard

COMPASS SYSTEM INSTALLATIONS

1991-05-01

HISTORICAL

ARP426

These recommendations cover the mechanical and electrical installation and installation test procedures for Compass Systems of the type normally used in transport type aircraft. The recommendations in the ARP do not supersede any airworthiness requirements in Civil Air Regulations.

Standard

Compass System Installations

2008-02-16

HISTORICAL

ARP426A

These recommendations cover the mechanical and electrical installation and installation test procedures for Compass Systems of the type normally used in transport type aircraft. The recommendations in the ARP do not supersede any airworthiness requirements in Civil Air Regulations.

Standard

FLIGHT DIRECTORS

1954-12-01

HISTORICAL

AS420

This Aeronautical Standard covers Flight Directors for use on aircraft to indicate to the Pilot, by visual means, the correct control application for the operation of an aircraft in accordance with a pre-selected flight plan.

Standard

FUEL AND OIL QUANTITY GAGES

1948-11-01

HISTORICAL

AS405

This specification covers: Type I - Float Gages Type II - Capacitance Gages

Standard

FUEL AND OIL QUANTITY INSTRUMENTS

1956-12-15

HISTORICAL

AS405A

This Aeronautical Standard covers two basic types of instruments as follows: Type I - Float Instruments Type II - Capacitance Instruments

Standard

FUEL AND OIL QUANTITY INSTRUMENTS

1991-05-01

HISTORICAL

AS405B

This Aeronautical Standard covers two basic types of instruments as follows: Type I - Float Instruments Type II - Capacitance Instruments

Standard

FUEL FLOW METERS

1948-11-01

HISTORICAL

AS407

This specification covers the following basic types of instruments, or combinations thereof, intended for use in indicating fuel consumption of aircraft engines.

Standard

FUEL FLOW METERS

1954-12-15

HISTORICAL

AS407A

This aeronautical standard covers two basic types of instruments, or combinations thereof, intended for use in indicating fuel consumption of aircraft engines.

Standard

Fuel Flowmeters

2008-02-16

HISTORICAL

AS407C

This Aeronautical Standard covers two basic types of instruments, or combinations thereof, intended for use in indicating fuel consumption of aircraft engines as follows: TYPE I - Measure rate of flow of fuel used. TYPE II - Totalize amount of fuel consumed or remaining.

Standard

Fuel and Oil Quantity Instruments

2012-08-22

CURRENT

AS405D

This Aeronautical Standard covers two basic types of instruments as follows: Type I - Float Instruments Type II - Capacitance Instruments