Search Results

This technical paper collection focuses on the general topic of combustion engine gaseous emissions (regulated and non-regulated). This includes well-to-wheels CO2 production for alternative technologies, fuel economy and all greenhouse gas emission research. It also includes hydrocarbon species and specific NOx species production over aftertreatment devices as a result of changes in fuel specification and the inclusion of bio-derived components and consideration of secondary emissions production (slip) as a result of aftertreatment.

In recent years, automakers have been developing various types of environmentally friendly vehicles such as hybrid (HV), plug-in hybrid (PHV), electric (EV), and fuel cell (FCV) vehicles to help reduce greenhouse gas (GHG) emissions. However, there are few commercial solar vehicles on the market. One of the reasons why automakers have not focused attention on this area is because the benefits of installing solar modules on vehicles under real conditions are unclear. ...This paper describes the benefits and desirable specifications of solar vehicles from the standpoint of well-to-wheel GHG emissions reduction. This study assumed that solar modules would be installed on HVs equipped with extra battery capacity for solar power storage. ...To summarize the results, total well-to-wheel GHG emissions were reduced by 30% when 1,000 W solar modules and a 4 kWh battery were installed on all vehicles, compared to a reference case with neither solar modules nor a battery.

When considered along with Phase 2 Greenhouse Gas (GHG) requirements, the proposed Air Resource Board (ARB) nitrogen oxide (NOx) emission limit of 0.02 g/bhp-hr will be very challenging to achieve as the trade-off between fuel consumption and NOx emissions is not favorable. ...Each of these engine models met the 2027 Phase 2 GHG emission standards but used a different combination of technologies, including downsizing, downspeeding, variable compression ratio (VCR), cylinder deactivation, and turbocompounding. ...The results show that with appropriate selection of engine and aftertreatment technology packages, the 2027 Phase 2 GHG emission standards and the proposed 2024 ultra-low NOx emission standards can be achieved simultaneously.

We present a parametric analysis of electric vehicle (EV) adoption rates and the corresponding contribution to greenhouse gas (GHG) reduction in the US light-duty vehicle (LDV) fleet through 2050. The analysis is performed with a system dynamics based model of the supply-demand interactions among the fleet, its fuels, and the corresponding primary energy sources. ...Widespread EV adoption can have noticeable impact on petroleum consumption and GHG emissions by the LDV fleet. However, EVs alone cannot drive compliance with the most aggressive GHG emission reduction targets, even as the electricity source mix shifts away from coal and towards natural gas. ...However, EVs alone cannot drive compliance with the most aggressive GHG emission reduction targets, even as the electricity source mix shifts away from coal and towards natural gas.

Nitrous oxide (N2O), with a global warming potential (GWP) of 297 and an average atmospheric residence time of over 100 years, is an important greenhouse gas (GHG). In recognition of this, N2O emissions from on-highway medium- and heavy-duty diesel engines were recently regulated by the US Environmental Protection Agency (EPA) and National Highway Traffic Safety Administration’s (NHTSA) GHG Emission Standards. ...In recognition of this, N2O emissions from on-highway medium- and heavy-duty diesel engines were recently regulated by the US Environmental Protection Agency (EPA) and National Highway Traffic Safety Administration’s (NHTSA) GHG Emission Standards. Unlike NO and NO2, collectively referred to as NOx, N2O is not a major byproduct of diesel combustion. ...Engine-based results show that N2O emissions for this nonroad engine and aftertreatment system are below the current 0.1 g/bhp·hr on-highway GHG standard. To better understand the processes which contribute to the system-level N2O emissions seen during engine testing, reactor-based experiments were conducted to elucidate the fundamental component-level mechanisms responsible for N2O formation.

They are responsible for 50% of petroleum (oil) consumption and 60% of all greenhouse gas (GHG) emissions worldwide. The number of vehicles is forecasted to double by 2050. Therefore the environmental issues such as noise, emissions and fuel burn have become important for energy and environmental sustainability. ...The technologies related to reduction in energy requirements such as reducing the vehicle mass by using the high strength low weight materials and reducing the viscous drag by active flow control and smoothing the operational profile, and reducing the contact friction by special tire materials are discussed along with the portable energy sources for reducing the GHG emissions such as low carbon fuels (biofuels), Lithium-ion batteries with high energy density and stability, and fuel cells.

This study investigates the life cycle greenhouse gas (GHG) emissions of a set of vehicles using two real-world gliders (vehicles without powertrains or batteries); a steel-intensive 2013 Ford Fusion glider and a multi material lightweight vehicle (MMLV) glider that utilizes significantly more aluminum and carbon fiber. ...Our results show that the MMLV glider can reduce life cycle GHG emissions despite its use of lightweight materials, which can be carbon intensive to produce, because the glider enables a decrease in fuel (production and use) cycle emissions. ...However, the fuel savings, and thus life cycle GHG emission reductions, differ substantially depending on powertrain type. Compared to ICVs, the high efficiency of HEVs decreases the potential fuel savings.

In European Union (EU), transport causes about a quarter of the total greenhouse gases (GHG) emissions and road vehicles are the biggest contributors, with nearly three-quarters of the overall GHG emissions. ...In European Union (EU), transport causes about a quarter of the total greenhouse gases (GHG) emissions and road vehicles are the biggest contributors, with nearly three-quarters of the overall GHG emissions. In this context, many governments are adopting different strategies to achieve a sustainable mobility, including the electrification of public transport, such as full electric taxis (e-taxis). ...The purpose of this research is to identify the best vehicle segment for the e-taxis fleet according to GHG emissions within the vehicle lifespan. To this end, a cradle-to-grave Life Cycle Assessment (LCA) and battery aging simulations for Lithium-ion batteries are conducted, basing on the state-of-art standard for test driving cycles and average emissions of the EU electricity mix.

Use of renewable energies in vehicle electrification, including hydroelectric and photovoltaic energies, currently 39% of the generation mix, and gasoline usage reduction reduces GHG emissions of the country. The EV scenario; however, increases the GHG emissions of the subcompact vehicle by 22%, whereas this scenario reduces the emissions of the mid-size and the light-duty truck by 25% and 47%, respectively. ...The system boundary includes both the renewable and nonrenewable energy sources available in Chile and well-to-pump energy consumptions and GHG emissions due to Li mining and Li-ion battery manufacturing. All the major input data required for TEA and LCA were generated using Autonomie vehicle modeling software. ...The electrification of compact, mid-size, and a light duty truck, reduce the nationwide GHG emissions by 27%, 47%, and 37%, respectively, for the HEV scenario. Use of renewable energies in vehicle electrification, including hydroelectric and photovoltaic energies, currently 39% of the generation mix, and gasoline usage reduction reduces GHG emissions of the country.

Comparing the vehicle cycle of the BEV and ICEV, the energy consumption of BEV is 40.0% higher than that of ICEV and the total greenhouse gas (GHG) emissions of BEV is 44.6% higher than that of ICEV, due to the use of energy-intensive materials in the power battery of BEV. ...It is found that in the terms of the full life cycle of the ICEV and BEV, the overall energy use of the BEV is 26.6% lower than that of ICEV and the overall GHG emissions of BEV is 12.8% lower than that of ICEV.

The results demonstrate that geographical factor plays an important role in the GHG emission generation of EVs. The highest amount of GHG emission as demonstrated on Chevrolet Volt is 3,869 kg CO₂ eq per year in Pittsburgh, while the smallest GHG emission is only 2,125 kg CO₂ eq per year with Nissan Leaf in Los Angeles, based on the averaged U.S. annual driving mileages. ...The highest amount of GHG emission as demonstrated on Chevrolet Volt is 3,869 kg CO₂ eq per year in Pittsburgh, while the smallest GHG emission is only 2,125 kg CO₂ eq per year with Nissan Leaf in Los Angeles, based on the averaged U.S. annual driving mileages.

The proposed US LD (light-duty) greenhouse gas (GHG) regulation for 2017-25 is reviewed, as well as the finalized, first-ever, US HD (heavy-duty) GHG rule for 2014-17. ...The proposed US LD (light-duty) greenhouse gas (GHG) regulation for 2017-25 is reviewed, as well as the finalized, first-ever, US HD (heavy-duty) GHG rule for 2014-17. The paper then gives a brief, high-level overview of key emissions developments in LD and HD engine technology, covering both gasoline and diesel. ...Emissions challenges include lean NOx remediation for diesel and lean-burn gasoline to meet both the emerging NOx and GHG regulations. NOx control technologies are then summarized, including SCR (selective catalytic reduction) with ammonia, and hydrocarbon-based approaches.

Instead of estimating greenhouse-gas emissions (GHG) from fuel consumption, as in ICE vehicles, emissions from BEVs are dependent on carbon emission intensities produced by electricity generation for the energy the BEVs consume. ...Three locations in China were selected for regional analysis for several key reasons: the vehicle market in China is larger compared to the U.S. and European markets, the fuel consumption and GHG emissions of gasoline cars in China for some passenger vehicle segments is higher than that of Europe, and China’s substantial reliance on coal power for electricity produces significantly higher GHG emissions compared to the U.S. and Europe. ...Three locations in China were selected for regional analysis for several key reasons: the vehicle market in China is larger compared to the U.S. and European markets, the fuel consumption and GHG emissions of gasoline cars in China for some passenger vehicle segments is higher than that of Europe, and China’s substantial reliance on coal power for electricity produces significantly higher GHG emissions compared to the U.S. and Europe.

The EcoCAR3 team of California State University, Los Angeles designed a Parallel Post Transmission Plug-in Hybrid Electric Vehicle (PPT PHEV) that will maintain consumer acceptability in the areas of performance, utility and safety with the end-goal of reducing Well-to-Wheel Green House Gas (WTW GHG) emissions and Well-to-Wheel Petroleum Energy Use (WTW PEU). The team utilizes the 2016 Chevrolet Camaro platform with modifications such as 2.4L Ecotec engine, a 134 HP electric motor and a 12.6 KW/h battery pack. ...Also presented, is the optimized propulsion control strategy which lowers WTW GHG and WTW PEU achieved while extending energy storage system life, increasing the mpgge to 59.6 under the new modified control strategy defined as “I.W.U.”

The US finalized LD (light-duty) greenhouse gas (GHG) regulation for 2017-25. The paper then gives a brief, high-level overview of key developments in LD and HD engine technology, covering both gasoline and diesel. ...Marked improvements in engine efficiency are summarized for gasoline and diesel engines to meet both the emerging NOx and GHG regulations. HD engines are just starting to demonstrate 50% brake thermal efficiency. NOx control technologies are then summarized, including SCR (selective catalytic reduction) with ammonia, and hydrocarbon-based approaches.

The Advanced Light-Duty Powertrain and Hybrid Analysis tool was created by EPA to evaluate the Greenhouse Gas (GHG) emissions of Light-Duty (LD) vehicles. It is a physics-based, forward-looking, full vehicle computer simulator capable of analyzing various vehicle types combined with different powertrain technologies. ...Version 1.0 of the ALPHA tool was applicable only to conventional, non-hybrid vehicles and was used to evaluate off-cycle technologies such as air-conditioning, electrical load reduction technology and road load reduction technologies for the 2017-2025 LD GHG rule. The next version of the ALPHA tool will extend its modeling capabilities to include power-split and P2 parallel hybrid electric vehicles and their battery pack energy storage systems.

The Advanced Light-Duty Powertrain and Hybrid Analysis (ALPHA) tool was created by EPA to evaluate the Greenhouse Gas (GHG) emissions of Light-Duty (LD) vehicles. It is a physics-based, forward-looking, full vehicle computer simulator capable of analyzing various vehicle types combined with different powertrain technologies. ...Version 1.0 of the ALPHA tool was applicable only to conventional, non-hybrid vehicles and was used to evaluate off-cycle technology such as air-conditioning, electrical load reduction technology and road load reduction technologies for the 2017-2025 LD GHG and Fuel Economy rule. The next version of the ALPHA tool extends its modeling capabilities to include power-split and P2 parallel hybrid electric vehicles and their battery pack energy storage systems.

However, it is not clear if these proposals will reduce greenhouse gas (GHG) emissions. Emissions from raw material extraction, manufacturing, and power generation are shadowed by the focus on reducing the reliance on fossil fuel use. ...Life-cycle analysis (LCA) can assess the GHG emissions produced before, during and after the life of a vehicle in a cradle-to-grave analysis.

A large increase in GHG emissions has led to a substantial increase in EV adoption. Due to its complexity, predicting the states of LIB remains to be a roadblock for mass adoption.

The formation of these salts can reduce the availability of NH3 for NOx conversion, block active catalyst sites, and result in the formation of N2O, a regulated Greenhouse Gas (GHG). In this study, we investigate the effect of hydrothermal aging on the formation and decomposition of ammonium nitrate on a state-of-the-art Cu/zeolite selective catalytic reduction (SCR) catalyst.