Search Results

This paper contributes to the Committee on Commonized Aerodynamics Automotive Testing Standards (CAATS) initiative, established by the late Gary Elfstrom. It is collaboratively compiled by automotive wind tunnel users and operators within the Subsonic Aerodynamic Testing Association (SATA). Its specific focus lies in automotive wind tunnel test techniques, encompassing both those relevant to passenger car and race car development. It is part of the comprehensive CAATS series, which addresses not only test techniques but also wind tunnel calibration, uncertainty analysis, and wind tunnel correction methods. The core objective of this paper is to furnish comprehensive guidelines for wind tunnel testing and associated techniques. It begins by elucidating the initial wind tunnel setup and vehicle arrangement within it.

Efficient thermal management is essential in high power density electric drive units (EDUs) due to limited space and working environment. Major heat sources in EDUs are from the inverter, motor and gearbox. System level thermal response prediction models comprising various components within the EDU are of interest from both product performance and software controls standpoint. A system level physics-based lumped parameter thermal network (LPTN) model is built in a one-dimensional (1D) framework using inputs from empirical, electromagnetic, three-dimensional conjugate fluid/heat transfer analysis and test data to predict the component temperature within the EDU. Empirical models were used to calculate heating due to efficiency loss from the gearbox. The thermal loses from the motor are estimated as outputs from electromagnetic simulations.

Electronically locking differentials that have dog-clutches may not always have a smooth engagement. The duration of the engagements needs to be quantified, and the different types of engagement need to be qualified. The engagement time is dictated by both the mechanical and electrical sub-systems of the differential. Three different analytical methods were developed to simulate engagement. The first method uses Simulink to co-simulate the electromagnetic behavior of the actuator in ANSYS Maxwell, and the multibody dynamic behavior of the differential in MSC ADAMS. The second method simulates the mechanics of the differential in AMESim, where an equation for the electromagnetic force inside the actuator is integrated into the model. The third method leverages the former two methods by combining the MSC ADAMS multibody dynamic behavior with integrated equation for the electromagnetic force inside the actuator.

Over the years, requirements for an electric drive for traction applications have increased substantially in terms of efficiency, power density, packaging space and cost. Manufacturers have employed various strategies to achieve high efficiency and power dense solutions. One such strategy is to use a synergistic approach by combining typical EDU sub-components such as an inverter, a motor and a gearbox with a differential to form a fully integrated 3-in-1 solution. Electrical and thermal losses from such a system can be quite significant as it includes losses from the inverter, the motor and the gearbox. As a result, thermal performance is often a limiting factor in improving the packaging space and power density. To address thermal issues, an effective liquid cooling system must be employed that ensures sufficient heat dissipation from all of the EDU subcomponents and helps to reduce packaging space.

Automotive electric drive unit designs are often limited by installation space and the related environmental conditions. Electrical losses in various components of the motor such as stator, rotor and coils can be significant and as a result, the thermal design can become a bottle neck to improve power and torque density. In order to mitigate the thermal issue, an effective liquid cooling system is often employed that ensures sufficient heat dissipation from the motor and helps to reduce packaging size. Although both stator and rotor are cooled in a typical motor, this paper discusses a multiphase oil-air mixture analysis on a spinning hollow rotor and rotor shaft subjected to forced oil cooling. Three-dimensional computational fluid dynamics (CFD) conjugate heat transfer (CHT) simulations were carried out to investigate flow and heat transfer. The effect of centrifugal force, shaft RPM, density gradients and secondary flows were investigated.

Autonomous Vehicles (AVs) operate based on image information and 3D maps generated by sensors like cameras, LIDARs and RADARs. This information is processed by the on-board processing units to provide the right actuation signals to drive the vehicle. For safe operation, these sensors should provide continuous high quality data to the processing units without interruption in all driving conditions like dust, rain, snow and any other adverse driving conditions. Any contamination on the sensor surface/lens due to rain droplets, snow, and other debris would result in adverse impact to the quality of data provided for sensor fusion and this could result in error states for autonomous driving. In particular, snow is a common contamination condition during driving that might block a sensor surface or camera lens. Predicting and preventing snow accumulation over the sensor surface of an AV is important to overcome this challenge.

With the rapid development of artificial intelligence, the autonomous vehicles (AV) have attracted considerable attention in the automotive industry. However, different factors negatively impact the adoption of the AVs, delaying their successful commercialization. Accretion of atmospheric icing, especially wet snow, on AV sensors causes blockage on their lenses, making them prone to lose their sight, in turn, increasing potential chances of accidents. In this study, two different designs are proposed in order to prevent snow accretion on the lenses of AVs via air flow across the lens surface. In both designs, lenses made of plain glass and superhydrophobic coated glass surfaces are tested. While some researchers have shown promise of water repellency on superhydrophobic surfaces, more snow accretion is observed on the superhydrophobic surfaces, when compared to the plain glass lenses.

This article presents an approach for comparing alternative repairable systems and calculating the value of information obtained by testing a specified number of such systems. More specifically, an approach is presented to determine the value of information that comes from field testing a specified number of systems in order to appropriately estimate the reliability metric associated with each of the respective repairable systems. Here the reliability of a repairable system will be measured by its failure rate. In support of the decision-making effort, the failure rate is translated into an expected utility based on a utility curve that represents the risk tolerance of the decision-maker. The algorithm calculates the change of the expected value of the decision with the sample size. The change in the value of the decision represents the value of information obtained from testing.

Reliability analysis of engineering structures such as bridges, airplanes, and cars require calculation of small failure probabilities. These probabilities can be calculated using standard Monte Carlo simulation, but this method is impractical for most real-life systems because of its high computational cost. Many studies have focused on reducing the computational cost of a reliability assessment. These include bootstrapping, Separable Monte Carlo, Importance Sampling, and the Combined Approximations. The computational cost can also be reduced using an efficient method for deterministic analysis such as the mode superposition, mode acceleration, and the combined acceleration method. This paper presents and demonstrates a method that uses a combination of Sobol quasi-random sequences and bootstrapping to reduce the number of function calls. The study demonstrates that the use of quasi-random numbers in conjunction bootstrapping reduces dramatically computational cost.

The Environmental Protection Agency (EPA) requirement for 54.5mpg by 2025 to reduce greenhouse gases has pushed the industry to look for alternative fuels to run vehicles. Electricity is of those green energies that can help auto industry to achieve those strict requirements. However, the electric or hybrid-electric vehicles brought new challenges into science and engineering world including the Noise and Vibration issues which are usually tied up with both airborne and structural noises. The electromagnetic force plays a significant role in acoustic noise radiation in the electric motor which is an air-gap radial Maxwell force. This paper describes an innovative approach to model the physics of noise radiated by the electric motor.

Hypoid gears transmission error (TE) is a metric that is usually used to evaluate their NVH performance in component level. The test is usually done at nominal position as well as out of positions where the pinion and gear are moved along their own axis and also along offset direction to evaluate sensitivity of the measured TE to positional errors. Such practice is crucial in practical applications where the gear sets are inevitably exposed to off position conditions due to a) housing machining and building errors, b) deflections of housing, bearings, etc. under load and c) thermal expansions or contractions of housing due to ambient temperature variations. From initial design to development stage, efforts should be made to design the gear sets to be robust enough to all combinations of misalignments emanated from all three mentioned categories.

Design optimization occurs through a series of decisions that are a standard part of the product development process. Decisions are made anywhere from concept selection to the design of the assembly and manufacturing processes. The effectiveness of these decisions is based on the information available to the decision maker. Decision analysis provides a structured approach for quantifying the value of information that may be provided to the decision maker. This paper presents a process for determining the value of information that can be gained by evaluating linearly correlated design alternatives. A unique approach to the application of Bayesian Inference is used to provide simulated estimates in the expected utility with increasing observations sizes. The results provide insight into the optimum observation size that maximizes the expected utility when assessing correlated decision alternatives.

Injury Risk Curves are developed from cadaver data for sternal deflections produced by anterior, distributed chest loads for a 25, 45, 55, 65 and 75 year-old Small Female, Mid-Size Male and Large Male based on the variations of bone strengths with age. These curves show that the risk of AIS ≥ 3 thoracic injury increases with the age of the person. This observation is consistent with NASS data of frontal accidents which shows that older unbelted drivers have a higher risk of AIS ≥ 3 chest injury than younger drivers.

Injury risk curves for SID-IIs thorax and abdomen rib deflections proposed for future NCAP side impact evaluations were developed from tests conducted with the SID-IIs FRG. Since the floating rib guide is known to reduce the magnitude of the peak rib deflections, injury risk curves developed from SID-IIs FRG data are not appropriate for use with SID-IIs build level D. PMHS injury data from three series of sled tests and one series of whole-body drop tests are paired with thoracic rib deflections from equivalent tests with SID-IIs build level D. Where possible, the rib deflections of SID-IIs build level D were scaled to adjust for differences in impact velocity between the PMHS and SID-IIs tests. Injury risk curves developed by the Mertz-Weber modified median rank method are presented and compared to risk curves developed by other parametric and non-parametric methods.

In 1983, General Motors Corporation (GM) petitioned the National Highway Traffic Safety Administration (NHTSA) to allow the use of the biofidelic Hybrid III midsize adult male dummy as an alternate test device for FMVSS 208 compliance testing of frontal impact, passive restraint systems. To support their petition, GM made public to the international automotive community the limit values that they imposed on the Hybrid III measurements, which were called Injury Assessment Reference Values (IARVs). During the past 20 years, these IARVs have been updated based on relevant biomechanical studies that have been published and scaled to provide IARVs for the Hybrid III and CRABI families of frontal impact dummies. Limit values have also been developed for the biofidelic side impact dummies, BioSID, ES-2 and SID-IIs.

Brake pad to rotor adhesion following exposure to corrosive environments, commonly referred to as “stiction”, continues to present braking engineers with challenges in predicting issues in early phases of development and in resolution once the condition has been identified. The goal of this study took on two parts - first to explore trends in field stiction data and how testing methods can be adapted to better replicate the vehicle issue at the component level, and second to explore the impacts of various brake pad physical properties variation on stiction propensity via a controlled design of experiments. Part one will involve comparison of various production hardware configurations on component level stiction tests with different levels of prior braking experience to evaluate conditioning effects on stiction breakaway force.

For higher mileage vehicles, noise from contaminant ingress is one of the largest durability issues for wheel bearings. The mileage that wheel bearing sealing issues increase can vary due to multiple factors, such as the level of corrosion for the vehicle and the mating components around the wheel bearing. In general, sealing issues increase after 20,000 to 30,000 km. Protecting the seals from splash is a key step in extending bearing life. Benchmarking has shown a variety of different brake corner designs to protect the bearing from splash. This report examines the effect of factors from different designs, such as the radial gap between constant velocity joint (CVJ) slinger and the knuckle, knuckle labyrinth height and varying slinger designs to minimize the amount of splash to the bearing inboard seal. This report reviews some of the bearing seal failure modes caused by splash.

The strong focus on reducing brake drag, driven by a historic ramp-up in global fuel economy and carbon emissions standards, has led to renewed research on brake caliper drag behaviors and how to measure them. However, with the increased knowledge of the range of drag behaviors that a caliper can exhibit comes a particularly vexing problem - how should this complex range of behaviors be represented in the overall road load of the vehicle? What conditions are encountered during coastdown and fuel economy testing, and how should brake drag be measured and represented in these conditions? With the Environmental Protection Agency (amongst other regulating agencies around the world) conducting audit testing, and the requirement that published road load values be repeatable within a specified range during these audits, the importance of answering these questions accurately is elevated. This paper studies these questions, and even offers methodology for addressing them.

An experimental study was conducted to evaluate the variable amplitude fatigue behavior of a neat polymer (polypropylene impact co-polymer) and a polymer composite made of polybutylene terephthalate (PBT) with 30 wt% short glass fibers. Fatigue tests were conducted on un-notched and notched specimens at room temperatures. Plate-type specimens were prepared in the transverse direction with respect to the injection mold flow direction and a circular hole was drilled in the center of notched specimens. Two-step loadings (high-low and low-high) tests at two damage ratio of 0.2 and 0.5 at stress ratios of R = 0.1 and -1 were conducted to investigate load sequence effects and prediction accuracy of the linear damage rule. Different behaviors were observed for unreinforced and short glass fiber reinforced polymers under the two-step loading tests.

Over the last two decades inverse problems have become increasingly popular due to their widespread applications. This popularity continuously demands designers to find alternative methods, to solve the inverse problems, which are efficient and accurate. It is important to use effective techniques that are both accurate and computationally efficient. This paper presents a method for solving inverse problems through Artificial Neural Network (ANN) theory. The paper also presents a method to apply Grey Wolf optimizer (GWO) algorithm to inverse problems. GWO is a recent optimization method producing superior results. Both methods are then compared to traditional methods such as Particle Swarm Optimization (PSO) and Markov Chain Monte Carlo (MCMC). Four typical engineering design problems are used to compare the four methods. The results show that the GWO outperforms other methods both in terms of efficiency and accuracy.