Search Results

With the increasing focus on reducing CO2 emissions to combat global warming and climate change, the automotive industry is exploring near zero-emission alternative fuels to replace traditional fossil-based fuels like diesel, gasoline, and CNG. Methanol is a promising alternative fuel that is being evaluated in India due to its easy transportation and storage, as well as its production scalability and availability potential. This study focuses on the retro-fitment solution of M100 (pure methanol) SI port-fuel injection (PFI) mode of combustion. A heavy duty single-cylinder engine test setup was used to assess methanol SI combustion characteristic. Lean operation strategy has been investigated. At lean mixture conditions a significant drop in NOX and CO emissions was achieved. The fuel injection techniques and the impact of exhaust gas recirculation (EGR) on the conventional stoichiometric combustion process is highlighted.

To achieve CO2-neutral mobility, various OEMs are launching Heavy Duty (HD) Electric Vehicle (EV) throughout the globe. HD EVs are equipped with high-power battery packs to sustain intercity trips in laden conditions. Compared to passenger EVs, commercial EVs require higher charging duration due to high-capacity batteries with existing CCS charging standard. This results in increased trip duration low power charging and overnight charging will result in higher idle time therefore decreasing the effective vehicle utilization. To mitigate these challenges, CharIN proposes Megawatt Charging System (MCS) in SAE J3271. This paper aims at providing a comprehensive analysis between the Megawatt Charging System and Combined Charging System. In addition to this, this paper emphasis the hardware and software changes required in the Charging Control Unit (CCU) to meet SAE J3271 standards and hardware solutions to operate the vehicle within its respective thermal limit during megawatt charging.

With increase in number of EVs on Indian roads, poised EV makers to produce innovative and pragmatic concept of electric vehicle features. The concept of bidirectional charging is one of that and which is creating buzz and curiosity among EV buyers. The bidirectional charging enables EV owners to lend the power to grid, other vehicles or use for other auxiliary applications. This paper focuses on idea of vehicle-to-vehicle (V2V) level 1, level 2 AC charging using J1772 standard, and level 3 DC fast charging using ISO 15118 or DIN 70121. where one user can lend a range of few kilometers to other based on requirement as a helping hand. This paper proposes a new idea which enable vehicle-to-vehicle (V2V) charging using ISO 15118, DIN70121 and J1772 protocol. In V2V charging, source vehicle shall function as a mobile charging source (EVSE) and other shall function as a sink (EV).

The advent of autonomous vehicles promises to revolutionize the transportation sector globally, and India, as one of the world's fastest-growing economies, stands at the forefront of this transformative technology. This paper presents a brief overview of the current state and potential implications of autonomous vehicles in the Indian context. With its densely populated cities, diverse traffic conditions, and complex road infrastructure, India presents unique challenges and opportunities for the deployment of autonomous vehicles. This technology has the potential to address critical issues such as road safety, congestion, and pollution while transforming the mobility experience for millions of people. However, several hurdles must be overcome to fully harness its benefits. The paper explores key considerations for the implementation of autonomous vehicles in India.

Indian cities are among the most polluted in the world. The transportation sector is one of the major sources of gaseous pollutants. In recent years, also the effects of climate change and global warming have been felt across the globe. India has therefore committed at the CoP26 summit in 2021 to reduce its CO2 emissions by 45% till the year 2030. The Indian automotive sector is already addressing the problem with implementation of the Stage 2 BS VI norms, CAFÉ & Stage V standards and pursuing rapid electrification with application of zero emission vehicles. India also has the largest rail network of Asia, and a significant proportion of greenhouse gases is emitted by this sector. Deployment of zero emission fuel cell trains would be one of the solutions to meet India’s emission reduction targets.

Compliance with the future CO2 emission limits for the fleet of vehicles sold presents a major challenge for the automotive industry. To comply with these stringent limits, one solution is mobility using hydrogen as an energy carrier. In this context, the development of Proton Exchange Membrane (PEM) fuel cells for commercial vehicle applications, both on- and off-road, is of significant interest due to the non-existent CO2 emissions. However, performance of these devices is closely related to the control concepts that are used to ensure high efficiency, good transient performance, high reliability & durability as well as safe operation. To address these challenges, this paper presents a modular Fuel Cell Control Software which offers the potential to be used for different P&ID (Piping & Instrumentation Diagram) configurations of fuel cell systems.

Most of the vehicles with internal combustion engines worldwide use fossil fuels. The widely used fuels available on the market are gasoline, diesel, and CNG. These fuels are getting costlier every year while at the same time generating pollutants through exhaust gases. Hence in the market, electric vehicles are effectively providing pollution-free solutions in the passenger car and lightweight carrier vehicle segments. However, the off-road, heavy-duty, and stationary applications with high load factors, are in general less favorable for battery electric scenarios since frequent charging will be mandatory and time-consuming. Hence, for these applications, the replacement of an internal combustion engine is quite difficult. There are various renewable fuels like ammonia, methanol, and biodiesel under research tests and study. As these are renewable fuels, the cost of these fuels can be lowered during mass production.

Climate change and global warming are one of the major challenges faced by the world today. A significant number of Indian cities rank among the most polluted globally, with vehicular emissions being the primary contributor. To address this issue, the Government of India is actively advocating for the adoption of zero-emission vehicles such as electric vehicles through policies and initiatives like FAME II [1], PMP and the National Mission for Transformative Mobility and Storage. The acceptance of electric vehicles is growing in the Indian market seeing more than 200% increase in sales in the year 2022 compared to 2021 with a large share of 2-wheelers, 3-wheelers and compact cars getting electrified. Further adoption of electrification on a much larger scale currently faces the major challenge of high overall vehicle cost compared to conventional vehicles, with the major contribution coming from the HV battery which is the costliest system on the electric vehicles.

Climate change is a global phenomenon now and countries across the globe are working towards reducing emissions by bringing in stricter legislations on emissions and CO2. India is also facing huge challenges on pollutions in large cities. Reports suggest that 7 of the 10 most polluted cities of the world lie in India. The growing public opinion towards cleaner air and reduced greenhouse gaseous emissions has sensitized the matter and has led to drafting of strict emission legislations in India during the past few years. The leap frogging from BS 4 to BS 6 in 2020 by skipping BS 5 norms showed the intent of the GOI towards emission reduction. The BS 6 legislation is not limiting to meeting norms with legislative emission cycle but will also focus from year 2023 onto real driving emissions on actual roads. GOI is also proposing to implement fleet CO2 emission norms (CAFÉ) by 2022 to regulate the CO2 emissions.

Noise & Vibration refinement of automotive vehicles is becoming important parameter due to its influence on environmental aspect and comfort perceived by occupants. NVH parameters are driving factors in current vehicle design strategy. Drivers comfort is extremely important, and driver’s expectations from commercial and heavy-duty trucks are as good as refined passenger cars. Other trends in commercial vehicle segment such as engine downsizing, weight, cost reduction and meeting stringent emission norms have influenced vehicle design dynamics. These parameters are critical and often contribute to vehicle NVH issues. Considering these new trends in commercial vehicle segment, it becomes challenging for an NVH engineer to provide optimized solutions. NVH issues could be related to the various subsystems such as driveline, axle, transmission steering wheel etc. in the vehicle and its resonant frequencies.

Super ultra-low NOX emission engine concepts are essential to comply with future emission legislations. To meet the future emission standards, application of advanced diesel exhaust aftertreatment systems (EATS), such as Diesel Oxidation Catalyst (DOC), Lean NOX Trap (LNT), Selective Catalytic Reduction coatings on Soot Filters (SCRF) and underfloor SCR, is required. Effective customized thermal management strategies are essential to ensure fast light-off of the EATS after engine cold start, and to avoid significant cooldown during part load operation. The authors describes the investigation of different exhaust gas heating measures, such as intake throttling, late fuel injection, exhaust throttling, advanced exhaust cam phasing, retarded intake cam phasing, cylinder deactivation, full turbine bypass, electric catalyst heating and electrically heated intake manifold strategies.

Advanced powertrains for modern vehicles require the optimization of conventional combustion engines in combination with tailored electrification and vehicle connectivity strategies. The resulting systems and their control devices feature many degrees of freedom with a large number of available adjustment parameters. This obviously presents major challenges to the development of the corresponding powertrain control logics. Hence, the identification of an optimal system calibration is a non-trivial task. To address this situation, physics-based control approaches are evolving and successively replacing conventional map-based control strategies in order to handle more complex powertrain topologies. Physics-based control approaches enable a significant reduction in calibration effort, and also improve the control robustness.

The Bharat Stage (CEV/Tractor) IV & V emission legislations will come into force in Oct 2020 & Apr 2024 respectively, posing a major engineering challenge in terms of system complexity, reliability, costs and development time. Solutions for the EU Stage-V NRMM legislation in Europe, from which the BS-V limits are derived, have been developed and are ready for implementation. To a certain extent these European solutions can be transferred to the Indian market. However, certain market-specific challenges are yet to be defined and addressed. In addition, a challenging timeline has to be considered for application of advanced technologies and processes during the product development. In this presentation, the emission roadmap will be introduced in the beginning, followed by a discussion of potential technology solutions on the engine itself as well as on the after treatment components.

In-use compliance under LEV III emission standards, GHG, and fuel economy targets beyond 2025 poses a great opportunity for all ICE-based propulsion systems, especially for light-duty diesel powertrain and aftertreatment enhancement. Though diesel powertrains feature excellent fuel-efficiency, robust and complete emissions controls covering any possible operational profiles and duty cycles has always been a challenge. Significant dependency on aftertreatment calibration and configuration has become a norm. With the onset of hybridization and downsizing, small steps of improvement in system stability have shown a promising avenue for enhancing fuel economy while continuously improving emissions robustness. In this paper, a study of current key technologies and associated emissions robustness will be discussed followed by engine and aftertreatment performance target derivations for LEV III compliant powertrains.

Dynamic skip fire (DSF) has shown significant fuel economy improvement potential via reduction of pumping losses that generally affect throttled spark-ignition (SI) engines. In DSF operation, individual cylinders are fired on-demand near peak efficiency to satisfy driver torque demand. For vehicles with a downsized-boosted 4-cylinder engine, DSF can reduce fuel consumption by 8% in the WLTC (Class 3) drive cycle. The relatively low cost of cylinder deactivation hardware further improves the production value of DSF. Lean burn strategies in gasoline engines have also demonstrated significant fuel efficiency gains resulting from reduced pumping losses and improved thermodynamic characteristics, such as higher specific heat ratio and lower heat losses. Fuel-air mixture stratification is generally required to achieve stable combustion at low loads.

The range of tasks in automotive electrical system development has clearly grown and now includes goals such as achieving efficiency requirements and complying with continuously reducing CO2 limits. Improvements in the vehicle electrical system, hereinafter referred to as the power net, are mandatory to face the challenges of increasing electrical energy consumption, new comfort and assistance functions, and further electrification. Novel power net topologies with dual batteries and dual voltages promise a significant increase in efficiency with moderate technological and financial effort. Depending on the vehicle segment, either an extension of established 12 V micro-hybrid technologies or 48 V mild hybridization is possible. Both technologies have the potential to reduce fuel consumption by implementing advanced stop/start and sailing functionalities.

In view of changing climatic conditions all over the world, Green House Gas (GHG) saving related initiatives such as reducing the CO2 emissions from the mobility and transportation sectors have gained in importance. Therefore, with respect to the large U.S. market, the corresponding legal authorities have defined aggressive and challenging targets for the upcoming time frame. Due to several aspects and conditions, like hesitantly acting clients regarding electrically powered vehicles or low prices for fossil fuels, convincing and attractive products have to be developed to merge legal requirements with market constraints. This is especially valid for the market segment of Light-Duty vehicles, like SUV’S and Pick-Up trucks, which are in high demand.

The emission legislations are becoming increasingly strict all over the world and India too has taken a big leap in this direction by signaling the migration from Bharat Stage 4 (BS 4) to BS 6 in the year 2020. This decision by the Indian government has provided the Indian automotive industry a new challenge to find the most optimal solution for this migration, with the existing BS 4 engines available in their portfolio. Indian market for the LCV segment is highly competitive and cost sensitive where the overall vehicle operation cost (vehicle cost + fluid consumption cost) is the most critical factor. The engine and after-treatment technology for BS 6 emission levels should consider the factors of minimizing the additional hardware cost as well as improving the fuel efficiency. Often both of which are inversely proportional. The presented study involves the optimization of after treatment component size, layout and various systems for NOx and PM reduction.

Despite the trend in increased prosperity, the Indian automotive market, which is traditionally dominated by highly cost-oriented producion, is very sensitive to the price of fuels and vehicles. Due to these very specific market demands, the U-LCV (ultra-light commercial vehicle) segment with single cylinder natural aspirated Diesel engines (typical sub 650 cc displacement) is gaining immense popularity in the recent years. By moving to 2016, with the announcement of leapfrogging directly to Bharat Stage VI (BS VI) emission legislation in India, and in addition to the mandatory application of Diesel particle filters (DPF), there will be a need to implement effective NOx aftertreament systems. Due to the very low power-to-weight ratio of these particular applications, the engine operation takes place under full load conditions in a significant portion of the test cycle.

The Bharat Stage VI (BS-VI) emission legislation will come into force in 2020, posing a major engineering challenge in terms of system complexity, reliability, cost and development time. Solutions for the EURO VI on-road legislation in Europe, from which the BS-VI limits are derived, have been developed and have already been implemented. To a certain level these European solutions can be transferred to the Indian market. However, several market-specific challenges are yet to be defined and addressed. In addition, a very strict timeline has to be considered for application of advanced technologies and processes during the product development. In this paper, the emission roadmap will be introduced in the beginning, followed by a discussion of potential technology solutions on the engine itself as well as on the exhaust aftertreatment side. This includes boosting and fuel injection technologies as well as different exhaust gas recirculation methods.