Search Results

Through virtual dynamic simulations it is possible to gain quality, safety, reduce cost and development time. Eliminating prototypes components to avoid future problems with package and early degradation of automotive components. This article has the objective validate the simulation methodology linked with flexible tube and hoses that are under engine displacement action to increase the confidence level of the design. The methodology validation consists in compare scanned physical model and virtual simulation models. Using Simcenter 3D Flexible Pipe software as study base. As input parameters it was used geometrical, physical, and chemical data for the virtual model. Finally, the environment can apply the dynamic movement of the powertrain set in the validation of the package and the evaluated component.

Nowadays the automotive market is reducing product development time and launching more technological vehicles, always focusing on having even more safety with better customer experience which generates big competitiveness and requires more accurate and faster development, the virtual simulations make it possible to meet this new reality with a high confidence level. This work comprises the validation of a methodology to analyze the design confidence level for flexibles associated with suspension kinematics. To validate the methodology, the scanned physical model was compared with the virtual simulations using the Simcenter 3D Flexible Pipe software. As inputs data for simulation, it is used geometrical, physical, and chemical information. Through the suspension kinematics study was establish possible movement situations to obtain the flexibles deformations attending to all suspension positions.

Use of glycerin as a base for antifreeze is not a new idea. ASTM International published standards wherein the use of Glycerin within antifreeze and engine coolant products is seen as a feasible alternative. ASTM D7640 covers engine coolant grade glycerin (1, 2, 3 Propanetriol, Glycerol) with 99.5% purity and ASTM D7714 covers the requirements for Glycerin base engine coolants used in automobiles or other light duty service cooling systems. This paper aims to demonstrate the best composition of an Engine coolant Glycerin base designed to be diluted with water at 35%/65% vol/vol in comparison to a conventional Engine Coolant Ethylene Glycol (EG) base also diluted at 35%/65% vol/vol. Experiments were run to define the best amount of Glycerin could replace Ethylene Glycol in Engine Coolant Concentrate formula.

The application of press hardening steels (PHS) Al-Si coating has been increasing in body in white vehicles as an approach to meet the demands of safety and CO2 reduction regulations. The vehicle structures with PHS largely depend on the integrity and the mechanical performance of the spots weld. During the spot welding process, intermetallic phase may appear in function of the chemical composition of the steel and coating. One of these intermetallics is the Fe-Al phase which brittleness decreases the strength of the weld joint. In this study, resistance spot welding (RSW) experiments were performed in order to evaluate the influence of the welding parameters of single-lap joints PHS - 22MnB5 steel grade.

The high level of reliability of virtual analysis for suspension system development should not be thinking only for comfort and performance purpose, considering the `growing number of failures due to the touch between components in dynamic condition. The study establishes a simple and optimized methodology, able to predict more accurately the flexible brake hose path subject to the steering motion and associates with the independent suspension course, aiming the best route in order to achieve a low cost and robust design. In turn, the flexible brake hose non-linear model invalidates the multibody study to get the best route. However, with the aid of motion making use of NX9 [1] CAD [2] software was prepared dynamic movement that subjects front independent suspension system that establishes a Cartesian routine that maps 977 points, much higher than 9 points from previous studies, comprising a more accurate path performed by the hose.

Through computational dynamic simulations is possible to achieve high reliability index in the development of automotive components, thereby enabling the reduction of cost and time of a product development with considerable gain in quality. This work suggests the validation of a methodology for simulation where is possible to improve the confidence level for design flexible components, such Heater and Cooling hoses that are under dynamic engine action, in relation to the physical model. Known the difficulty in predicting non-linear mathematical relationship deformation under effect of forces and moments, was established a study based on experimental measurements where were used as input parameters to simulate the dynamic behavior of flexible components, in this case, coolant hoses.

Acoustics, in a broad sense, is an essential product attribute in the automotive industry, therefore, it is relevant to study and compare theoretical and numerical predictions to experimental acoustic measurements, key elements of many acoustic development processes. The numerical methods used in the industry for acoustic predictions are widely used for exhaust system optimization. However, the numerical and theoretical predictions very often differ from experimental results, due to modeling simplifications, temperature variations (which have high influence on speed of sound), manufacturing variations in prototype parts among others. This article aims to demonstrate the relevant steps for acoustics development applied in automotive exhaust systems and present a comparative study between experimental tests and computer simulations results for each process. The exhaust system chosen for this development was intended for a popular car 4-cylinder 1.0-liter engine.

This paper makes an analysis of problems encountered in assembling components from automotive vehicles. It shows wheel and tires assembling cases of an automaker that applies lean manufacturing concepts in the production process. This study not only makes the analysis from the best way to apply the methodology to seek for the root cause, but also uses methodology to identify containment measures, defining robust solutions capable of preventing the incidence of similar problems. This methodology can be applied to solving problems of any production process, even outside of the automotive industry

In the middle of the global competition, inside the automotive sector, the perceived quality of costumers, related to the beauty and harmony of the outer skin surfaces of motor vehicles, has become one of the main determinant factors in the purchase process decision. In general, the initial perceived quality of a car is determined by an appealing design of its body, the color and gloss of its paint, and also the manufacturing and assembly accuracy of the skin panels. The appealing design makes the skin panel even more complex and hard to produce with current metal forming technologies and the results are often small distortions on the outer surfaces about tens of microns and most of the times paint does not cover such imperfections. Despite the technological advances along the years, surface quality inspection was still being performed by manual and subjective evaluation by experts.

Few products or services exist that do not require some supply chain management. The more suppliers that are involved the more complex the supply chain management becomes. Even if the entire supply chain from basic raw materials that come from the earth or out of the minds and actions of people, is not considered there is still a supply chain that must be attended and in today's global economy competition is growing every day, and automotive products (vehicles and components) are often developed in one country though it's made based on global architectures, used and applied in other markets, and to find success in this competitive reality, automakers and/or global business migrated from local suppliers to global sourcing and in today's world of global outsourcing, supply chain management plays an ever important, strategic and expanding role in delivering results once automakers are aiming to launch low cost vehicles and recognized as world best-in-class products.

Reliability, maintainability/serviceability and security are three qualities of product excellence desired by customers and users of products, however customer expectation for product reliability are continually increasing for almost all product and despite of most of the companies has worked on the philosophy of continuous improvement to meet or exceed the customer's expectations, its difficult to avoid failures or its difficult to ensure zero defect. Once it happens, it generate a customer complaint which is registered by companies. The way that companies used to register the complaints is through their warranty system and also a special database. Most of the companies maintain warranty databases for purposes of financial reporting and warranty expense forecasting. In some cases, there are attempts to extract engineering information from such databases. Another application is to use warranty data to detect potentially serious field reliability problems as early as possible.

This paper proposes a methodology for automotive manufacturing lines scheduling. This methodology is based on generalized stochastic Petri Nets and Markov decision processes with imprecise probabilities. The usual generalized stochastic Petri Nets is extended by allowing imprecision about probabilities to be explicitly represented and by human task time graph of different products to be attached. Once the system is modeled using this tool and its extensions, we translate the resulting models into Markov decision processes with imprecise probabilities, in order to compute optimal policies that will result in the line scheduling. This paper introduces an algorithm that performs this translation.

In the automotive industries, time and parts production costs are fundamental, mainly in prototyping production. The RTV (Room Temperature Vulcanized) process is an important alternative production to flexible silicone molds when you need to inject polyurethane parts. The objective is time reduction in tooling production and parts. RTV requires notable initial investments in equipments. Many times, this cost does not fit in the automotive third part company's budget. This work shows how is possible to obtain parts by RTV process with excellent quality, without high investments in equipments and without quality loss in produced parts. Lead times and tooling and parts costs are analyzed. Due to equipments low costs, this alternative is accessible not only to automotive industries but also to small and medium suppliers.

According to several customer perception survey, Squeak and Rattle (S&R) is among the top most annoying defects. Consequently, GMB engineering design, development and validation process must be continuously improved and consistently applied to all platforms to guarantee that all products are free from squeaks and rattles. This paper introduces those concepts and discusses some strategies to eliminate or minimize S&R. Concepts and tests results are commented. Finally, the challenge in detection and analysis of S&R is discussed. Objective and subjective evaluation methodologies are being developed and suppliers training and integration have been improved

This work presents aspects related to research and development of high-speed steels for valve seat inserts application. Five series of materials were evaluated: high speed steel M3/2 infiltrated with copper during sintering; high speed steel M3/2 with Cu3P addition; high speed steel M3/2 with Cu3P addition and further copper infiltrated during sintering; high speed steel M3/2 mixed with iron powder; high speed steel M3/2 mixed with iron powder and niobium carbide. The physical and mechanical properties of the evaluated high-speed steels are presented in terms of densification, hardness, and radial mechanical strength. These properties are compared according to the materials processing and heat treatment.

The present work gives an overview of the current situation of failures that may occur in automotive components, showing their distribution in the vehicle and the causes that make them occur, trying to emphasize the different materials which are used in the manufacturing of these components. This work is a technical approach strictly supported by an engineering concept which aims to discuss the different factors which contribute to cause premature failures of automotive components, prior to their utilization in the field or when they are exposed to the most variable conditions of use. One of the most important objectives of this study is to call the attention of design engineers, research engineers and manufacturing people to the importance of the components integrity which shall be taken into primary consideration in the design phase as well as in the specification of the material and process of manufacturing.