Search Results

This specification covers two types of two-component, epoxy, chemical and solvent resistant primer coatings formulated primarily for spray application. These coatings are compatible with epoxy and polyurethane topcoats.

This specification establishes requirements for thermoset protective coatings in powder form.

This specification establishes requirements for pressure-sensitive adhesive tape designed for masking and color separation during aircraft painting operations.

This specification establishes requirements for a high gloss paint system for use on commercial/business aircraft.

This specification establishes requirements for three types of corrosion preventative coatings for protection of aircraft integral fuel tanks.

Amendment 1 of AMSSTD595A.

This specification covers interior aircraft cabin coatings, which when tested under specified conditions exhibit low heat release and smoke release properties.

This SAE Standard defines the general requirements and provides a system for the control of quality for conformal coatings suitable for application to printed circuit assemblies.

This specification establishes requirements for an interior decorative clear coating for wear protection of metal substrates.

This specification establishes the requirements for a high visibility, durable, exterior fluorescent coating system consisting of a pigmented fluorescent coating with a clear protective overcoat containing a weathering stabilizer. This coating system is capable of being removed without softening the permanent undercoats.

This specification covers tapes for masking during paint stripping operations (6.1).

This specification establishes requirements for a heat resistant aluminized organic coating with sufficient corrosion and erosion resistance for the finished substrate.

This specification establishes requirements for a tape that is used to perform organic coatings adhesion testing.

This specification establishes requirements for thermoset protective coatings in powder form.

This specification establishes requirements for three types of corrosion preventative coatings for protection of aircraft integral fuel tanks.

This standard presents the colors used by Government Activities in a format suitable for color selection, color matching and for quality control inspection. This document describes the designation and use of the color chips of this standard. Formats for color chip representation and precise color matching formats are as described below: a Color Chip Representation, Fan Deck: Suitable for color identification and selection. b Color Chip Representation, Color Book: Suitable for color identification, comparison and selection. c Precise Color Matching, Individual Color Chips: A 3 × 5 inch color chip supplied in a 3 × 5 inch protective envelope, suitable for color matching and quality control inspection purposes. d Precise Color Matching, Sets of Color Chips: A set containing one 3 × 5 inch color chip in its protective envelope for each Fed-Std-595 color, suitable for color matching and quality control inspection purposes.

This specification establishes requirements for a heat resistant aluminized organic coating with sufficient corrosion and erosion resistance for the finished substrate.

This specification covers a semigloss black baking enamel based on a phenolic resin.

This specification covers a glyceryl-phthalate-base paint vehicle in the form of a liquid.

This specification covers a two-component, polytetrafluoroethylene-filled polyurethane coating material supplied in kit form.