Search Results

In a crash, impact against the steering assembly can be a major cause of serious and fatal injury to drivers. But the interrelationship between injury protection and factors of surface area, configuration, padding, relative position of the spokes, and number and stiffness of spokes and rim is not clear. This paper reports a series of high-G sled tests conducted with anesthetized animal subjects in 30 mph impacts at 30 G peaks. A total of eight tests were conducted, five utilizing pig subjects, one a female chimpanzee, one an anthropomorphic dummy, and one test with no subject. Instrumentation included closed circuit TV, a tri-axial load cell mounted between the steering wheel and column, seat belt load measurement, six Photo-Sonics 1000 fps motion picture cameras, and poloroid photography. Medical monitoring pre, during and post-impact was followed by gross and microscopic tissue examination.

A study of free-fall accidents and resulting injuries was conducted to determine how useful these types of data could be in establishing human injury tolerance limits. “Tolerance” was examined primarily for children at two levels - reversible injury and threat to survival. The specific objectives were to investigate specific free-falls in sufficient depth to permit biomedical or mathematical reconstruction of the fall, simulate selected free-falls to estimate impact response, and compare predicted responses with observed injuries as a means of estimating human tolerance levels. From more than 2100 reported free-falls, 110 were investigated on-site. Seven head-first and three feet-first falls were then simulated using the MVMA 2-D Crash Victim Simulator. Newspaper reports of free-falls showed that males fell six times as often as females and most often while at work. Children fell from windows and balconies more often than from any other hazard.

The importance of crashworthiness and the role of restraint systems in occupant impact protection in U.S. civil aircraft design is being increasingly recognized. Current estimates of the number of fatalities which could be prevented annually in survivable accidents range from 33 to 94%. This study reviews the development of existing Federal Aviation Administration restraint system standards from the first requirement for safety belts in the Air Commerce Regulations of 1926 to present 14 CFR 1.1. The FAA and industry standards are critically evaluated for Parts 23 (small airplanes), 25 (air transports), 27 (rotorcraft), and 29 (transport category rotorcraft). State-of-the-art developments, including an overview of previous accident experience, results of experimental studies, comparison with other standards, and primary data sources are provided.

General aviation accident investigations can provide valuable data to the design engineer concerning the crash performance of current models and can indicate needed improvements for occupant protection in future aircraft. Current statistics and the historical background of major investigations during the past 65 years are provided. A five-year study of general aviation accidents occurring in the State of Michigan is used as a basis to illustrate recent findings relative to occupant injury mechanisms, relative crash protection, and crashworthiness performance of current models of aircraft. Results indicate that the degree of structural damage may not relate to the degree of occupant injury when the cabin area remains relatively intact. A primary requirement is documented for adequate upper-torso restraint for all occupants, and the excellent crash performance of such a system is described.

Advanced crash-impact protective equipment and techniques which have application to crew and passenger crash safety in jet transport aircraft have been evaluated. Thirty-two state-of-the-art concepts have been analyzed from a systems engineering viewpoint with respect to several engineering, psychological, and medical disciplines. In order to provide a framework to determine the function level of each concept, an event-oriented flow chart of the crash and escape event has been prepared. The 17 events occurring during a crash are included, beginning with system installation and concluding with emergency evacuation of a disabled aircraft. Performance with respect to the events on the flow chart are rated in terms of hazards of system use, maintainability, reliability, human factors, and other technological considerations.

Human impact injury and survival tolerance levels for various crash conditions are presented on the basis of currently available biomedical and biomechanical knowledge. Consideration of physical factors influencing trauma-including body orientation, restraint system, magnitude, distribution, and time duration of deceleration-are summarized, as well as tabulations and sources of data for both whole body and regional impact tolerances. These biological data concerning human impact tolerances are provided as guidelines for improved engineering design of general aviation crashworthiness.

Aircraft used for business (executive corporate transportation or personal business) and utility purposes now represent about one-third of the total United States aircraft inventory. Data from accident investigation of business aircraft involved in survivable accidents indicate serious injuries and fatality to the occupants occur most frequently as a result of the unprotected head and neck or chest flailing in contact with aircraft controls, instrument panel, or structure. Improvement of current aircraft to provide increased occupant safety and survival during crash impacts is both necessary and feasible. Design considerations include folding seat back locks to prevent collapse, increased seat tie-down to structure, instrument panels and glare shields designed to absorb energy through structural design and padding, stronger seat structure, lateral protection, design and packaging of knobs and projections to minimize injury in contact, and installation of upper torso restraint.

Both the inverted-Y yoke torso harness with inertia reel and the air bag restraint system have had extensive independent development for some time by several engineering and research organizations for both aviation and ground vehicle occupant protection. The research reported in this paper consists of the first biomechanical primate evaluation of these concepts as experimentally adapted for possible automotive use. These tests are a continuation of a study involving the relative impact protection and effectiveness of major restraint systems utilized in general aviation aircraft and in limited automotive use. The objective of this test series was to determine how much protection those advanced restraint concepts provided; to obtain preliminary biomechanical and physiological data; to identify problems of technique and applications in occupant protection; and to provide an initial basis for direction of future test requirements.