Search Results

Accuracy of numerical simulation has to be evaluated through the actual phenomenon such as experiment or measurement and then it can be employed to design the air-conditioning system of car cabin at the development phase. Scaled model of vehicle cabin was created by the Society of Automotive Engineers of Japan (JSAE) and the experiment was performed to obtain the detailed information of heat transfer characteristics inside the cabin under the non-isothermal condition. The sheet heaters were put to the inner surface of the acrylic cabin and they supplied certain amount of heat. The temperatures of inner and outer surface and air were measured to evaluate the thermal environment of the cabin. The results lead to enhancement of the data of the standard model of the cabin.

Global environment protection, Co2 emission reduction and so on, is an important problem in automotive industry. An Electric Vehicle (EV) production is one of policies. Co2 emission of EV is lower than Internal Combustion Engine (ICE), petrol and diesel engine. On the other hand, customer's needs for the comfort on driving increase year after year. So it's an important factor for new car performance. Generally speaking, it's thought that the noise and vibration performance of EV have the better of ICE performance. However the aerodynamic noise and road noise contribution for interior noise in EV rise in comparison with ICE, and moreover the sound quality change by new noise component of the motor noise. Therefore new sound evaluation method is needed for EV. So this paper demonstrates each noise component contribution in EV by new noise separation technology, and show the comparison result with EV and ICE.

Mitsubishi Motors Corporation succeeded in mass production of the electric vehicle “i-MiEV” which features leading-edge technologies epitomized by lithium-ion battery. The EV was released into the Japanese market in July 2009 and the European market in January 2011. In order to be used all over the world, the EV has to be practical and durable even under severe weather of extremely cold or extremely hot regions. In this paper we report some results of the tests conducted under extremely cold weather as well as extremely hot weather. From the test results the validity of the vehicle control system and the practicality of the EV are verified.

An efficient cooling system will ensure the reliability of the EV/HEV (Electric Vehicle/Hybrid Electric Vehicle) battery system and extend their lifetime. In order to shorten design period or increase design iterations, a high-speed and high-precision prediction method for cooling is indispensable. For models, such as Mitsubishi i-MiEV, which use fresh air to cool batteries in the battery pack, a transient approach based on loosely coupled method is developed to predict temperature change of batteries. The results by our new approach are in good agreement with the experimental data. Moreover, for the EV/HEV using circulated air to cool its batteries, a second approach is also developed, which can predict the temperature variations of both EV/HEV batteries in the battery pack and the cooling air.

Following the previous reports, ventilation characteristics in automobile was investigated by using a half-scale car model which was created by the Society of Automotive Engineers of Japan (JSAE). In the present study, the ventilation mode of the cabin was foot mode which was the ventilation method for using in winter season. Supplied air was blown from the supply openings under the dashboard to the rear of the model via the driver's foot region in this mode. The experiment was performed in order to obtain accurate data about the airflow properties equipped with particle image velocimetry (PIV). Our experimental data is to be shared as a standard model to assess the environment within automobiles. The data is also for use in computational fluid dynamics (CFD) benchmark tests in the development of automobile air conditioning, which enables high accuracy prediction of the interior environment of automobiles.

Idle speed reduction is one of the important solutions for fuel economy improvement. However, idle speed reduction requires improving the disturbance rejection performance of idle speed control to prevent malfunctions such as engine stall. In mass production engines, PID control is mainly used for the idle speed control because of easiness of the design. However the idle speed control system has nonlinear characteristics. Therefore we have developed the algorithm based on the sliding mode control(SMC) [1]. As a result, superior performance was obtained [2]. Furthermore, for performance, we developed the new algorithm based on Tuning Functions (TF) [3]. As a result, high disturbance rejection performance was obtained.

This paper describes the calculative verification of the effect of the right-and-left torque vectoring system in various types of drivetrain, namely, the front wheels only, the rear wheels only, and both front and rear wheels in FWD, RWD, and AWD vehicles. The effect is evaluated by calculating the vehicle dynamics limit; maximum acceleration and cornering ability. The right-and-left vectoring torque, which is needed for expanding the vehicle dynamics limit, is also calculated. And finally, the paper evaluates the suitable wheels for which the system should be applied in each drivetrain. The application to the front wheels is more effective for FWD vehicles. On the other hand, the application to the rear wheels is more effective for RWD and AWD vehicles.

The stratification feature of DI gasoline combustion was studied by using a constant volume combustion vessel. An index of stratification degree, defined as volumetric burning velocity, has been proposed based on the thermodynamic analysis of the indicated pressure data. The burning feature analysis using this stratification degree and the fuel vapor concentration measurement using He-Ne laser ray absorption method were carried out for the swirl nozzle spray with 90° cone angle and the slit nozzle spray with 60° fan angle. Ambient pressure and ambient temperature were changed from atmospheric condition to 0.5∼0.6 MPa and 465 K, respectively. Air Swirl with swirl ratio of 0∼1.0 were added for the 90° swirl nozzle spray. Single component fuels with different volatility and self-ignitability from each other were used besides gasoline fuel. The major findings are as follows. High ambient temperature improves stratification degree due to the enhanced fuel vaporization and vapor diffusion.

The shape and configuration of the air ventilation system determines the ventilation performance while influencing the design and structure of a car. It is therefore necessary to decide the configuration of the air ventilation system in the early stages of design. We tried to analyze the pressure level of the ventilation ducts from the aerodynamics simulation results added to the cowl top which had the ventilation intake duct, and so on. Thus we succeeded in designing a new development process that can be used to predict the ventilation performance in a shorter time without the use of prototypes.

New numerical simulation system and experimental evaluation system has been developed to predict and evaluate occupant's thermal sensation in a passenger compartment in which environment is not steady and not uniform. Transitional effective temperature, which is new index of thermal sensation, is proposed and verified to correspond with subjects' thermal sensation votes. The simulation system has two advantage beside the prediction of thermal sensation; automatic generation of a computational model and coupling analysis of temperature including an analysis of temperature distribution inside a cabin, refrigerating cycle, solar radiation, and so on. It was verified that this system well predicts occupant's thermal sensation in a short time.

A characteristic mechanism of in-cylinder combustion is “time-domain mixing” which mixes up unburned gas, products in the different stages of combustion process, and burned gas, by “eddy”, a flow component with its scales of several to 10 mm. It seems to play a role in completing the combustion. Now that direct injection is a central engine technology, a keyword to combustion control is “freedom of mixing”, that is, no restriction on mixture formation, realized by direct injection. Various kinds of combustion control technologies utilizing it, have been presented. After combustion control for a premixed leanburn gasoline engine, and a direct injection gasoline engine, was achieved by turbulence control, and mixing control, respectively, the next target of combustion control will be ignition control. It will be possible, by controlling some boundary condition on combustion and fuel chemistry. Time-domain mixing and freedom of mixing will support it.

Full-foam-type seat cushion for vehicle is made of such elements as panel, foam pad, and surface seat and each element individually effects on dynamic vibration comfort performance during riding. The most important requirement is to reduce resonance magnification of seat close to 6 Hz, which is the natural frequency of the human body''s internal organs. Conventionally, the prediction of the resonance frequency characteristics of the seat cushion is seldom done by calculation at design stage before evaluation of prototype test. This paper reports that it becomes possible to predict vibration property of seat cushion at design stage by solving vibration equation, which is obtained by replacing seat cushion structure with vibration system model having spring element and damping element equivalent to designed seat cushion and by making graph of resonance frequency characteristics using calculation program provided in this paper.

As the global environmental protection becomes the world consensus recently, the regulations of the fuel consumption and the exhaust gas have large effects on the performance and the fundamental structure of commercial vehicles. Especially the technology concerning "fluid" and "heat" has a close relationship with those issues. Owing to above circumstances, commercial vehicles such as large trucks and buses are forced to be designed near the limit of allowance. Furthermore, a rapid design is another requirement. However, though significant number of variations, i.e., cab configuration, wheel base, rear body configuration, engine specification, etc., are prepared, it is impossible to improve the performance of all those combinations by experiments which cost a lot. Accordingly, the quantitative prediction using computer will become indispensable at the beginning term of new car development.

transient vibrations caused by a sudden change in the road surface under steady-state random vibration subject the human body to unpleasant sensations. However, it is very difficult to examine each part of the seat structure and physical properties because the measurement position of acceleration sensors with the conventional evaluation method are limited to the hipbone on the seat cushion and lumbar on the seat back. In this paper, in order to evaluate three kinds of driver seats having different structures and physical properties, we dynamically measured body pressure distribution, which are mainly made with static measurements, on a pavement inducing transient vibrations. We analyzed each part of measurement data by means of a new human engineering index, which is body pressure change rate over time. We next investigated the correlation between the analyzed data and the subjective evaluation, and found the mechanism causing unpleasant sensations during transient vibrations.

The 4M5 series of four-cylinder, in-line, direct-injection diesel engines has been released by Mitsubishi Motors Corporation for light and medium-duty trucks and buses. Featuring an updated structure and reflecting the employment of state-of-the-art technology in the design of every component, the new engine series offers high reliability and compact dimensions. Moreover, the new series well meets contemporary demands for high performance, low noise, and clean combustion.

Austempered ductile iron (ADI) is a material having excellent mechanical properties and damping capacity. However practical mass production of ADI gears has not been possible due to ADI's poor machinability and distortion during the austempering heat treatment. With a new process method of carrying out hobbing before austempering when the material is in its soft condition, then austempering it and lastly, conducting the shave finishing process, we have diminished the above defects and developed practical ADI gears. These new gears generate less noise than ordinary nitrocarburized steel gears and are superior in pitting resistance.

The one-box type automobile's stability on the highway is often influenced by encountering crosswinds or when passing large automobiles such as trucks and buses. This causes the automobile to behave unexpectedly. Many experiments for improving this situation have been carried out. In this respect, the analysis of transient aerodynamic characteristics is important for automobile safety and stability on the highway. Conventional transient aerodynamic simulations require a supercomputer and about million grid points. Also there were few case studies that dealt with situations such as plunging into crosswind and passing an automobile. In this paper, a transient aerodynamic simulation by using a sliding mesh of discontinuous interface and the Arbitrary Lagrangian-Eulerian (ALE) method is presented.

Aerodynamic simulations of automobiles with an airflow type rear spoiler (a spoiler that guides part of the flow on the roof onto the rear window of a one-box or two-box car to reduce the adhesion of snow or dust on the rear window) using a discontinuous interface grid method and around a rear view door mirror using a solution adaptive grid method are presented. These new methods have made it possible to capture the detail phenomena around equipment items such as spoilers and door mirrors, thereby improving the accuracy of the CFD (Computational Fluid Dynamics) simulations and shortening the time required.

Since it is more difficult for truck door panels to realize curvature than passenger car door panels, internal stiffeners are mounted between the outer panel and inner panel through the use of an adhesive for ensuring stiffness. For this reason, a problem occurs as to the proper placement of the stiffeners so as to effectively improve stiffness. By FEM prediction and experimentation, the following have been clarified: (1) Arrangement of stiffeners for effectively improving stiffness (2) Stiffness share of stiffeners and outer panel against stiffness