Search Results

In this paper we present a project that interfaced the National Advanced Driving Simulator (NADS) with SynChrono, a module of the Project Chrono open source simulation platform, to enable real-time, physics-based simulation of multiple autonomous vehicles (AVs) interacting with manned vehicles. In this setup, a driver at NADS, at the University of Iowa, participates in a traffic scenario that involves AVs that run at the University of Wisconsin-Madison on a cluster supercomputer. The NADS simulator is a driving simulator giving the “most realistic driving simulation experience in the country” [1]. Thanks to its actuators, it can move across its 64-foot by 64-foot bay, rotate and tilt, to emulate vehicle movement and vibrations. In addition, the human driver drives in a full-size cab, surrounded by LED monitors, resulting in an immersive, high fidelity driving simulation experience.

This paper describes an effective integrated method for estimation of subject-specific mass, inertia tensor, and center of mass of individual body segments of a digital avatar for use with physics-based digital human modeling simulation environment. One of the main goals of digital human modeling and simulation environments is that a user should be able to change the avatar (from male to female to a child) at any given time. The user should also be able to change the various link dimensions, like lengths of upper and lower arms, lengths of upper and lower legs, etc. These customizations in digital avatar's geometry change the kinematic and dynamic properties of various segments of its body. Hence, the mass and center of mass/inertia data of the segments must be updated before simulating physics-based realistic motions. Most of the current methods use mass and inertia properties calculated from a set of regression equations based on average of some population.

The objective of this paper is to present our method of predicting and simulating visually realistic and dynamically consistent human stair-climbing motion. The digital human is modeled as a 55-degrees of freedom branched mechanical system with associated human anthropometry-based link lengths, mass moments of inertia, and centers of gravity. The joint angle profiles are determined using a B-spline-based parametric optimization technique subject to different physics-based, task-based, and environment-based constraints. The formulation offers the ability to study effects of the magnitude and location of external forces on the resulting joint angle profiles and joint torque profiles. Several virtual experiments are conducted using this optimization-based approach and results are presented.

Active steering systems can help the driver to master critical driving situations. This paper presents a fuzzy logic control strategy on active steering vehicle based on a multi-body vehicle dynamic model. The multi-body vehicle dynamic model using ADAMS can accurately predict the dynamic performance of the vehicle. A new hybrid steering scheme including both active front steering (applying an additional front steering angle besides the driver input) and rear steering is presented to control both yaw velocity and sideslip angle. A set of fuzzy logic rules is designed for the active steering controller, and the fuzzy controller can adjust both sideslip angle and yaw velocity through the co-simulation between ADAMS and the Matlab fuzzy control unit with the optimized membership function. To ensure the design of high-quality fuzzy control rules, a rule optimization strategy is introduced.

The effect of restrictive clothing on functional reach and on balance and gait during obstacle crossing of five normal subjects is presented in this work using motion capture and stability analyses. The study has shown that restrictive clothing has considerably reduced participants' functional reach. It also forced the participants to change their motion strategy when they cross-higher obstacles. When crossing higher obstacles, the participants averted their stance foot, abducted their arms, flexed their torso, used longer stance time, and increased their hip angle in the medial-lateral (Rolling) and vertical (Yawing) directions. The stability analysis of a virtual human skeletal model with 18 links and 25 degrees of freedom has shown that participants' stability has become critical when they wear restrictive clothing and when they cross higher obstacles.

New methods for fast, adaptive motion prediction of a virtual human are proposed and tested. An optimal locomotion for gait-driven motions like pushing, climbing and pick-up/delivery are sought through gradient-based optimization and inverse-dynamics. Such gait-driven motion can be produced by adapting the normal gait motion to the case when a characteristic force is applied, which is called an applied force. The applied force is a resistance force for pushing case and an object weight for delivery case. The concept of the zero moment point is modified to assess the dynamic equilibrium of the motion in presence of the applied force. For fast calculation, analytical forms of the cost/constraint gradients are provided. Stepping patterns are specified a priori to ensure the continuity of the cost/constraint function gradients. Also, by varying knots for the B-spline curve approximation, the gait stage durations are optimized.

SI property class 12.9 high strength steel bolts were used to investigate the fatigue behavior of bolt threads rolled before/after heat treatment using two different thread profiles and five different preload values. Bolts were 3/8 UNRC-16 (coarse) and 3/8 UNRF-24 (fine) and preloads were taken as 1, 50, 75, 90, and 100% of roll before heat treatment proof stress. Maximum near surface residual compressive stresses, obtained via x-ray diffraction, ranged from -500 to -1000 MPa. Axial loads were applied through the nut and all fatigue failures occurred at the first thread of the nut/bolt interface. SEM evaluation indicated all fatigue crack growth regions contained multiple fatigue facets, while final fracture regions were ductile dimples.

A continuation of the SAEFDE round-robin fatigue test program was conducted to determine the influence of a finer microstructure on monotonic tension, strain-controlled low cycle fatigue, fatigue crack growth, and fracture toughness of A356-T6 cast aluminum alloy. The finer microstructure castings, referred to as material W, were obtained using a water-chilled sand casting procedure. Material W exhibited more desirable ductile behavior than the previous SAEFDE materials X, Y, and Z. Material W exhibited superior smooth specimen low cycle fatigue resistance at both short and long lives, when compared to materials X, Y, and Z. This was due in part to the higher ductility and lower porosity of material W over materials X, Y, and Z. Material W exhibited similar fatigue crack growth behavior, and slightly higher values of fracture toughness at the same thickness when compared to materials X, Y, and Z.

Axial strain-controlled low cycle fatigue behavior was obtained from smooth specimens machined from spokes of A356-T6 cast aluminum alloy wheels. Two different foundries cast the wheels. Three wheels were used from one production run at one foundry and two wheels were used from two different production runs at the other foundry. Specimens from the three wheels of the same production run had essentially the same monotonic tensile properties and low cycle fatigue resistance. Specimens from the two wheels of the different production runs had different monotonic tensile properties and different low cycle fatigue resistance. All these A356-T6 wheel specimens cyclic strain harden with hysteresis loops typically offset to the compression side by five percent or less. The usual log-log linear model for low cycle fatigue adequately described the low cycle fatigue behavior.

Fracture toughness tests were conducted on the SAEFDE Committee's round-robin A356-T6 cast aluminum alloy materials designated X, Y and Z. Compact type specimens with a thickness of 9.1 and 20.3 mm were tested. Valid Klc values couid not be obtained for 9.1 mm thick specimens but were obtained for 20.3 mm thickness specimens. Due to larger castings, and hence slower cooling rates, a coarse secondary dendrite arm spacing, DAS, of 80 to 90 μm existed in the three materials. Similar Klc values were 18, 16.7 and 17.3 for the A356-T6 materials X, Y and Z respectively. Final fracture surfaces were also similar with predominant cleavage fracture with some localized ductile dimples and secondary cracking.