Search Results

The issue of greenhouse gas (GHG) emissions from the transportation sector is widely acknowledged. Recent years have witnessed a push towards the electrification of cars, with many considering it the optimal solution to address this problem. However, the substantial battery packs utilized in electric vehicles contribute to a considerable embedded ecological footprint. Research has highlighted that, depending on the vehicle's size, tens or even hundreds of thousands of kilometers are required to offset this environmental burden. Human-powered vehicles (HPVs), thanks to their smaller size, are inherently much cleaner means of transportation, yet their limited speed impedes widespread adoption for mid-range and long-range trips, favoring cars, especially in rural areas. This paper addresses the challenge of HPV speed, limited by their low input power and non-optimal distribution of the resistive forces.

Many research centers and companies in general aviation have been devoting efforts to the electrification of propulsive plants to reduce environmental impact and/or increase safety. Even if the final goal is the elimination of fossil fuels, the limitations of today's battery in terms of energy and power densities suggest the adoption of hybrid-electric solutions that combine the advantages of conventional and electric propulsive systems, namely reduced fuel consumption, high peak power, and increased safety deriving from redundancy. Today, lithium batteries are the best commercial option for the electrification of all means of transportation. However, lithium batteries are a family of technologies that presents a variety of specifications in terms of gravimetric and volumetric energy density, discharge and charge currents, safety, and cost.

Continuous improvements and innovations towards sustainability in the aviation industry has brought interest in electrified aviation. Electric aircrafts have short missions in which the temporal variability of thermal loads are high. Lithium-ion (Li-ion) batteries have emerged as prominent power source candidate for electric aircrafts and Urban Air Mobility (UAM). UAMs and Electric aircrafts have large battery packs with battery capacity ranging in hundreds or thousands of kWh. If the battery is exposed to temperatures outside the optimum range, the life and the performance of the battery reduces drastically. Hence, it is crucial to have a Thermal Management System (TMS) which would reduce the heat load on battery in addition to cabin, and machinery thermal loads. Thermal management can be done through active or passive cooling. Adding a passive cooling system like Phase Change Material (PCM) to the TMS reduces the design maximum thermal loads.

In intelligent surveillance and reconnaissance (ISR) missions, multiple autonomous vehicles, such as unmanned ground vehicles (UGVs) or unmanned aerial vehicles (UAVs), coordinate with each other for efficient information gathering. These vehicles are usually battery-powered and require periodic charging when deployed for continuous monitoring that spans multiple hours or days. In this paper, we consider a mobile host charging vehicle that carries distributed sources, such as a generator, solar PV and battery, and is deployed in the area where the UAVs and UGVs operate. However, due to uncertainties, the state of charge of UAV and UGV batteries, their arrival time at the charging location and the charging duration cannot be predicted accurately.

Compared with urban areas, the road surface in mountainous areas generally has a larger slope, larger curvature and narrower width, and the vehicle may roll over and other dangers on such a road. In the case of limited driver information, if the two cars on the mountain road approach fast, it is very likely to occur road blockage or even collision. Multi-vehicle cooperative control technology can integrate the driving data of nearby vehicles, expand the perception range of vehicles, assist driving through multi-objective optimization algorithm, and improve the driving safety and traffic system reliability. Most existing studies on cooperative control of multiple vehicles is mainly focused on urban areas with stable environment, while ignoring complex conditions in mountainous areas and the influence of driver status. In this study, a digital twin based multi-vehicle cooperative warning system was proposed to improve the safety of multiple vehicles on mountain roads.

Evaluating real-world hazards associated with perception subsystems is critical in enhancing the performance of autonomous vehicles. The reliability of autonomous vehicles perception subsystems are paramount for safe and efficient operation. While current studies employ different metrics to evaluate perception subsystem failures in autonomous vehicles, there still exists a gap in the development and emphasis on engineering requirements. To address this gap, this study proposes the establishment of engineering requirements that specifically target real-world hazards and resilience factors important to AV operation, using High-Definition Maps, Global Navigation Satellite System, and weather sensors. The findings include the need for engineering requirements to establish clear criteria for a high-definition maps functionality in the presence of erroneous perception subsystem inputs which enhances the overall safety and reliability of the autonomous vehicles.

The study emphasizes transitioning school buses from diesel to electric to mitigate their environmental impact, addressing challenges like limited driving range through predictive models. This research introduces a comprehensive control-oriented model for estimating auxiliary loads in electric school buses. It begins by developing a transient thermal model capturing cabin behavior, divided into passenger and driver zones. Integrated with a control-oriented HVAC model, it estimates heating and cooling loads for desired cabin temperatures under various conditions. Real-world operational data from school bus specifications enhance the model’s practicality. The models are calibrated using experimental cabin-HVAC data, resulting in a remarkable overall Root Mean Square Error (RMSE) of 2.35°C and 1.88°C between experimental and simulated cabin temperatures.

Global automobile manufacturers are increasingly adopting vehicle architecture development systems in the early stages of product development. This strategic move is aimed at rationalizing their product portfolios based on similar specifications and functions, with the overarching goal of simplifying design complexities and enabling the creation of scalable vehicles. Nevertheless, ensuring consistent performance in this dynamic context poses formidable challenges due to the wide range of design possibilities and potential variations at each development stage. This paper introduces an efficient reliability analysis process designed to identify and mitigate the distribution of Ride and Handling (R&H) performance. We employ a range of reliability analysis techniques, including Latin Hypercube Sampling and the enhanced Dimension Reduction (eDR) method, utilizing various types of models such as surrogate models and multi-body dynamics models.

Battery electric vehicles are quickly gaining momentum to improve vehicle fuel efficiency and emission reduction. However, they must be designed to provide adequate range on a single charge combined with good acceleration performance, top speed, gradeability, and fast charging times. The paper presents a model for sizing the power train of an electric vehicle, including the power electronic converter, electric motor, and battery pack. A major assumption is that an optimal wheel slip rate can be achieved by modern vehicles using slip control systems. MATLAB/Simulink was used to model the vehicle powertrain. Simulations were conducted based on different speed and acceleration profiles. The purpose of the study focused on the motor and power electronics sizing requirements to achieve optimal range and performance.

In recent years, the burgeoning applications of hydrogen fuel cells have ignited a growing trend in their integration within the transportation sector, with a particular focus on their potential use in multi-rotor drones. The heightened mass-based energy density of fuel cells positions them as promising alternatives to current lithium battery-powered drones, especially as the demand for extended flight durations increases. This article undertakes a comprehensive exploration, comparing the performance of lithium batteries against air-cooled fuel cells, specifically within the context of multi-rotor drones with a 3.5kW power requirement. The study reveals that, for the specified power demand, air-cooled fuel cells outperform lithium batteries, establishing them as a more efficient solution.

The global electric and hybrid aircraft market utilizing lithium-ion Energy Storage Systems (ESS) as a means of propulsion, is experiencing a period of extraordinary growth. We are witnessing the development of some of the most cutting-edge technology, and with that, some of the most complex challenges that we as an industry have ever faced. The primary challenge, and the most critical cause of concern, is a phenomenon known as a “Thermal Runaway”, in which the lithium-ion cell enters an uncontrollable, self-heating state, that if not contained, can propagate into a catastrophic fire in the aircraft. A Thermal Runaway (TR) can be caused by internal defects, damage, and/or abuse caused by an exceedance of its operational specifications, and it is a chemical reaction that cannot be stopped once the cell has reached its trigger temperature.

The focus on driver and occupant safety as well as comfort is increasing rapidly while designing commercial vehicles in India. Improvements in the road network have enhanced road transport for commercial vehicles. Apart from the cost of operation and fuel economy, the commercial vehicles must deliver goods within stipulated time. These factors resulted in higher speed of operation for commercial vehicles. The design should not compromise the safety of the vehicle at these higher speeds of operation. The vehicle should obey the driver’s intended direction at all speeds and the response of the vehicle to driver input must be predictable without much larger surprises which can lead to accidents. The commercial vehicles are designed with rigid axle and RCB type steering system. This suspension and steering design combination introduce steering errors when vehicle travel over bump, braked and while cornering.

The commercial aviation currently accounts for roughly 2.5 % of the global CO2 emissions and around 3.5% of world warming emissions, taking into account non CO2 effects on the climate. Its has grown faster in recent decades than the other transport modes (road, rail or shipping), with an average rate of 2.3%/year from 1990 to 2019, prior to the pandemic. Moreover, its share of Greenhouse (GHG) emissions is supposed to grow, with the increasing demand scenario of air trips worldwide. This scenario might threaten the decarbonization targets assumed by the aviation industry, in line with the world efforts to minimize the climate effects caused by the carbon emissions. In this context, hydrogen is set as a promising alternative to the traditional jet fuel, due to its zero carbon emissions.

Electric vertical take-off and landing (eVTOL) is defined as vertical lift aircraft propelled by electric power and capable of carrying people. Based on the system of battery powered CY300 eVTOL, a fuel cell-battery hybrid system (FBHS) in steady-state operation as a potential propulsion system for CY300 eVTOL is proposed. In order to analyze the feasibility of FBHS-powered eVTOL system, a mathematical model is established to evaluate the proposed system performance considering various irreversible effects. Furthermore, considerable sensitivity analyses indicate that the payload of the proposed system is considerably benefited by a higher specific energy of the battery system, specific power of the fuel cell system and hydrogen storage ratio of the hydrogen tank. Hydrogen tank weight decreases the payload while enhances the hovering time.

Taking into account the high rotor speed of the generator and the trend of high voltage in direct current microgrids in high-power aviation hybrid propulsion systems, a hybrid power system with a power of 200 kilowatts (kW), a voltage of 540 volts (V), and a rated generator speed of 10500 r/min was established. Anticipating the demands of future high-power system tests, a matching simulation model was developed. The paper discusses various aspects including model construction, test design, and result validation, proposing an overall control strategy for series hybrid aviation propulsion systems – utilizing lithium-ion batteries to stabilize grid voltage and using the turboshaft-generator unit as the primary power source to meet the main power demands of the electric propulsion system. The established model consists of four modules: turboshaft engine, power generator, voltage-stabilizing battery, and electric motor/propeller.

Partial discharge (PD) detection has been always a fundamental tool, potentially, for the design, quality control, commissioning, and reliability monitoring for the of insulation systems. The word “potentially” stems from the objective consideration of the intrinsic limitations suffered by the existing partial discharge, PD, measurement technologies, especially the need of experts to interpret results and the lack of clear correlation between PD-related quantities, and the condition-based maintenance approach. On the whole, a thorough revision of insulation systems design procedures and of the tools to evaluate aging and failure risk is needed, especially in components of electrical assets which are critical in terms of reliability, resilience, and safety.

The reliable operation of power systems on the lunar surface is crucial for critical research activities and supporting life. These systems are standalone or interconnected grids that integrate intermittent power sources and distributed energy storage. Lunar microgrids must be highly reliable, reconfigurable, and efficient. To meet these requirements, we propose the flexible DC energy router (FeDER), a modular and scalable power management unit for interconnected lunar DC microgrids. The FeDER integrates local energy storage and addresses various microgrid power management needs such as fault management, stability enhancement, power flow regulation, and power quality improvement. The lunar DC microgrids' design, protection, and control are achieved using a three-layered approach: (1) graph theory, (2) energy management system, and (3) smart resistor control. The lunar power grid architecture is introduced and the FeDER stability enhancement is implemented in the OPAL-RT platform.

Battery electric vehicle (BEV) adoption and complex powertrains pose new challenges to automotive industries, requiring comprehensive testing and validation strategies for reliability and safety. Hardware-in-the-loop (HIL) based real-time simulation is important, with cooperative simulation (co-simulation) being an effective way to verify system functionality across domains. Fault injection testing (FIT) is crucial for standards like ISO 26262. This study proposes a HIL-based real-time co-simulation environment that enables fault injection tests in BEVs to allow evaluation of their effects on the safety of the vehicle. A Typhoon HIL system is used in combination with the IPG CarMaker environment. A four-wheel drive BEV model is built, considering high-fidelity electrical models of the powertrain components (inverter, electric machine, traction battery) and the battery management system (BMS).

To support an industry wide response to an EASA proposed Special Condition regarding the threat of in-flight supercooled liquid water icing conditions at altitudes above FL300, Boeing 777 fleet data were used to estimate the frequency and severity of such icing occurrences. The data were from the calendar year 2019 and included ~ 950,000 airline revenue flights from around the world by multiple operators. The unique architecture of the Primary Ice Detection System (PIDS) on that model, in addition to robust meteorological data that was able to be correlated, afforded an opportunity to conservatively estimate the Total Water Exposure (TWE) and thus the Liquid Water Content (LWC) of the icing encounters captured at FL295 and above. This paper will outline the key methods used and present the findings.

Ice and snow accretion on aircraft surfaces imposes operational and safety challenges, severely impacting aerodynamic performance of critical aircraft structures and equipment. For optimized location-based ice sensing and integrated ‘smart’ de-icing systems of the future, microwave resonant-based planar sensors are presented for their high sensitivity and versatility in implementation and integration. Here, a conformal, planar complementary split ring resonator (CSRR) based microwave sensor is presented for robust detection of localized ice and snow accretion. The sensor has a modified thick aluminum-plate design and is coated with epoxy for greater durability. The fabricated sensor operates at a resonant frequency of 1.18 GHz and a resonant amplitude of -33 dB. Monitoring the resonant frequency response of the sensor, the freezing and thawing process of a 0.1 ml droplet of water is monitored, and a 60 MHz downshift is observed for the frozen droplet.