Search Results

This paper provides a simulation analysis of a novel interconnected roll stability control (RSC) system for improving the roll stability of semitrucks with double trailers. Different from conventional RSC systems where each trailer’s RSC module operates independently, the studied interconnected RSC system allows the two trailers’ RSC systems to communicate with each other. As such, if one trailer’s RSC activates, the other one is also activated to assist in further scrubbing speed or intervening sooner. Simulations are performed using a multi-body vehicle dynamics model that is developed in TruckSim® and coupled with the RSC model established in Simulink®. The dynamic model is validated using track test data. The simulation results for a ramp steer maneuver (RSM) and sine-with-dwell (SWD) maneuver indicate that the proposed RSC system reduces lateral acceleration and rollover index for both trailers, decreasing the likelihood of wheel tip-up and vehicle rollover.

The 2014 SAE Buckendale Lecture will address the past developments and challenges of electromechanical “smart” systems for improving commercial vehicles' functionality. Electromechanical systems combine traditional mechanical devices with electrical components to provide far higher degree of functionality and adaptability for improved vehicle performance. The significant advances in microprocessors and their widespread use in consumer products have promoted their implementation in various classes of vehicles, resulting in “smart” devices that can sense their operating environment and command an appropriate action for improved handling, stability, and comfort. The chassis and suspension application of electromechanical devices mostly relate to controllable suspensions and vehicle dynamic management systems, such as Electronic Stability Control.

Dynamic “Game Theory” brings together different features that are keys to many situations in control design: optimization behavior, the presence of multiple agents/players, enduring consequences of decisions and robustness with respect to variability in the environment, etc. In previous studies, it was shown that vehicle stability can be represented by a cooperative dynamic/difference game such that its two agents (players), namely, the driver and the vehicle stability controller (VSC), are working together to provide more stability to the vehicle system. While the driver provides the steering wheel control, the VSC command is obtained by the Nash game theory to ensure optimal performance as well as robustness to disturbances. The common two-degree of freedom (DOF) vehicle handling performance model is put into discrete form to develop the game equations of motion. This study focus on the uncertainty in the inputs, and more specifically, the driver's steering input.

A graphical user interface (GUI) toolbox called Vehicle System Simulator (VSS) is developed in MATLAB to ease the use of this vehicle model and hopefully encourage its widespread application in the future. This toolbox uses the inherent MATLAB discrete-time solvers and is mainly based on Level-2 s-function design. This paper describes its built-in vehicle dynamics model based on multibody dynamics approach and nonlinear tire models, and traction/braking control systems including Cruise Control and Differential Braking systems. The built-in dynamics model is validated against CarSim 8 and the simulation results prove its accuracy. This paper illustrates the application of this new MATLAB toolbox called Vehicle System Simulator and discusses its development process, limitations, and future improvements.

Inerters have become a hot topic in recent years, especially in vehicle, train, and building suspension systems. The performance of a passive inerter and a semi-active inerter was analyzed and compared with each other and it showed that the semi-active inerter has much better performance than the passive inerter, especially with the Hybrid control method. Eight different layouts of suspensions were analyzed with a quarter car model in this paper. The adaptation of dimensionless parameters was considered for a semi-active suspension and the semi-active inerters. The performance of the semi-active inerter suspensions with different layouts was compared with a semi-active suspension with a conventional parallel spring-damper arrangement. It shows a semi-active suspension, with more simple configuration and lower cost, has similar or better compromise between ride and handling than a semi-active inerter with the Hybrid control.

Using a simulation model, this study intends to provide a preliminary evaluation of whether semiactive dampers are beneficial to improving ride and handling in class 8 trucks. One of the great challenges in designing a truck suspension system is maintaining a good balance between vehicle ride and handling. The suspension components are often designed with great care for handling, while maintaining good comfort. For Class 8 trucks, the vehicle comfort is also greatly affected by the cab and seat suspensions. Dampers for passive suspensions are tuned “optimally,” using various metrics that the ride engineer may consider, for the condition in which the truck operates most frequently. In recent years, the popularity of semiactive dampers in passenger vehicles has prompted the possibility of considering them for class 8 trucks. In this study, the vehicle safety versus ride comfort trade-off is studied for a certain class of suspensions with semiactive fuzzy control.

The close proximity of seat suspensions to human body presents several challenges in terms of the perception of the suspension forces by the vehicle operator. This is particularly true of the suspensions with time-varying forces, such as semiactive seat suspensions. The major challenge in such suspensions is changing the suspension force from one state to under, without causing excessive amounts of dynamic jerk. This paper looks into the cause of dynamic jerk in semiactive suspensions with skyhook control, and presents two alternative implementations of skyhook control, called “no-jerk skyhook,” and “skyhook function,” for the purpose of this study. An analysis of the relationship between absolute velocity of the sprung mass and the relative velocity across the suspension is used to show the damping force discontinuities that result from skyhook control.

This study reports the subjective results from a project investigating the effectiveness of several newly proposed metrics to compare fatigue performance between two distinct truck seat cushions, specifically standard foam versus air-inflated cushions. We also highlight some of the fundamental differences between air-inflated and foam seat cushion based on driver's perceptions. Road tests were performed using existing commercial trucks in the daily operations of Averitt Express. A retrofit air-inflated seat cushion was installed in the fleet's trucks, and the drivers were allowed to adjust to the seats over approximately one week. After this adjustment period, twelve drivers rode on both the air-inflated seat cushion and their original foam seat cushion during their regularly scheduled routes. Surveys were collected throughout the test sessions and the truck seats were fitted with instrumentation to capture physical measurements of seat pressure distribution.

This study provides an experimental account of the effect of panhard rod suspensions on heavy truck ride, as evaluated by the B-post vertical and fore-aft accelerations. After describing the test setup, the paper will describe the details of two rear cab suspensions that are commonly used in North American trucks. Cab suspensions with dampers or similar elements that are used to provide lateral forces at the rear of the cab (called “baseline” cab suspension for the purpose of this study) and those that use a lateral link with a torsion spring at one end-commonly called “panhard rod”-are the two classes of rear cab suspensions that are considered in this study. The tests are performed on a class 8 truck that is setup in the laboratory for the purpose of providing good test repeatability and conducting an accurate design of experiment. The test results, which are analyzed in frequency domain, are compared for the two cab suspensions.

This paper presents a parametric study of two semiactive adaptive control algorithms through simulation: the non-model based skyhook control, and the newly developed model-based nonlinear adaptive vibration control. This study includes discussion of suspension model setup, dynamic analysis approach, and controller tuning. The simulation setup is from a heavy-duty truck seat suspension with a magneto-rheological (MR) damper. The dynamic analysis is performed in the time domain using sine sweep excitations without the need to linearize such a nonlinear semiactive system that is studied here. Through simulation, the effectiveness of both control algorithms is demonstrated for vibration isolation. The computation flops of the simulation in the SIMULINK environment are compared, and the adaptability is studied with respect to plant variations and different excitation profiles, both of which come across typically for vehicle suspension systems.

The objective of this paper is to describe a Class 8 heavy truck that the Virginia Tech Center for Transportation Research has modified and instrumented for use in evaluating Intelligent Transportation Systems (ITS) technologies. The truck is capable of recording a variety of data, both electronic and video, in real-time from a suite of sensors and cameras that have been inconspicuously mounted on the tractor. The tractor, trailer, and instrumentation package enable Virginia Tech to conduct commercial vehicle ITS research related to safety and human factors, and advanced vehicle control systems (AVCS). This paper will describe the instrumentation package, and address both general and specific types of research that can be performed using this truck.

The effect of primary suspensions (shock absorbers) on the body and axle motion of heavy trucks is investigated. A simulation program is used to show how damper tuning of conventional passive dampers and “skyhook” semiactive dampers effect ride, as measured by body acceleration, and axle motion, as measured by tire acceleration and tire deflection. Special attention is made to the coupling and interaction between the body and the axle motion. It is shown that passive and semiactive dampers have a different effect on the axle and body dynamics.