Search Results

The current study shows interesting results obtained by a new virtual approaching for evaluating the final stresses presented in automotive components during its application in vehicle which suggests product engineers a new tool for measuring the residual stresses in casting. As part of this proposal, an automotive as-cast aluminum wheel belong to current production was evaluated in accordance with data acquired in its manufacturing process. At that step, it was taking into account the real information of casting process parameters and the metallurgic results obtained in laboratorial tests such as, metallographic, chemical and mechanical tests. FEA (Finite Element Analysis) on simulation of wheel loading stress was made regarding those preliminary data obtained in CRSFEA simulation (cast residual stress finite element analysis) as entered parameters.

The current study shows important results obtained by a new technique of residual stress virtual evaluation in automotive components for improving the development and quality of new products, aiming the structural performance, mass and cost reductions. The approaching those virtual results were adjusted by metallurgic data obtained in metallography, mechanical and chemical analysis. As part of this proposal, an automotive aluminum wheel belong to current production was evaluated in accordance with data acquired in the wheel manufacturing process. It was taking in account the real information of casting process parameters and the metallurgic information obtained in laboratorial tests. In this work, the results show that product residual stresses shall be considerate and evaluated during design phases as improving proposal, new technical concerns and quality improving.

Reliability, maintainability/serviceability and security are three qualities of product excellence desired by customers and users of products, however customer expectation for product reliability are continually increasing for almost all product and despite of most of the companies has worked on the philosophy of continuous improvement to meet or exceed the customer's expectations, its difficult to avoid failures or its difficult to ensure zero defect. Once it happens, it generate a customer complaint which is registered by companies. The way that companies used to register the complaints is through their warranty system and also a special database. Most of the companies maintain warranty databases for purposes of financial reporting and warranty expense forecasting. In some cases, there are attempts to extract engineering information from such databases. Another application is to use warranty data to detect potentially serious field reliability problems as early as possible.

Few products or services exist that do not require some supply chain management. The more suppliers that are involved the more complex the supply chain management becomes. Even if the entire supply chain from basic raw materials that come from the earth or out of the minds and actions of people, is not considered there is still a supply chain that must be attended and in today's global economy competition is growing every day, and automotive products (vehicles and components) are often developed in one country though it's made based on global architectures, used and applied in other markets, and to find success in this competitive reality, automakers and/or global business migrated from local suppliers to global sourcing and in today's world of global outsourcing, supply chain management plays an ever important, strategic and expanding role in delivering results once automakers are aiming to launch low cost vehicles and recognized as world best-in-class products.

The purpose of this study is to establish the criteria of election of an electrical architecture tailor-made for the emerging markets, to be applied during the whole vehicle's lifecycle. A literature review about related subjects as the meaning of "electrical architecture," its techniques, criteria and methodologies of development, and the definitions of emerging and developed markets is also presented. Based on the bibliographical research, documentary analysis and unstructured interviews with active members of the automotive industry, the criteria for election of electrical architectures for emerging markets was established, as well as their describers and swing-weights, required by the use of the additive aggregation method - a multi-criteria decision taking method. The criteria were applied in two case studies of automotive industry: the developments of a low-cost hatch vehicle and a mid-size luxury sedan vehicle, both designed for emerging markets.

This work presents aspects related to research and development of high-speed steels for valve seat inserts application. Five series of materials were evaluated: high speed steel M3/2 infiltrated with copper during sintering; high speed steel M3/2 with Cu3P addition; high speed steel M3/2 with Cu3P addition and further copper infiltrated during sintering; high speed steel M3/2 mixed with iron powder; high speed steel M3/2 mixed with iron powder and niobium carbide. The physical and mechanical properties of the evaluated high-speed steels are presented in terms of densification, hardness, and radial mechanical strength. These properties are compared according to the materials processing and heat treatment.

According to several customer perception survey, Squeak and Rattle (S&R) is among the top most annoying defects. Consequently, GMB engineering design, development and validation process must be continuously improved and consistently applied to all platforms to guarantee that all products are free from squeaks and rattles. This paper introduces those concepts and discusses some strategies to eliminate or minimize S&R. Concepts and tests results are commented. Finally, the challenge in detection and analysis of S&R is discussed. Objective and subjective evaluation methodologies are being developed and suppliers training and integration have been improved

The purpose of the theme developed in this work is to increase the volume of information related to vehicle evaluation and how human perception can be translated into numbers, thus facilitating the process of definitions, refinement and analysis of its performance. Based on the discipline of psychophysics, where it is possible to study the relationship between stimulus and sensation and the use of post processing tool known as PSD (Power Spectral Density), post process the acceleration data of inputs perceived by the occupants of the vehicle, when driving in routes considered ergodic. By this, in a summarized way, get to human subjective perception of comfort. This material shows in a conceptual way a sequence of studies that were conducted to make it possible, to generate a performance classification of the subjective vehicle attribute of Smoothness, by processing values of acceleration measured the driver's seat.

In the current automotive industry, in an increasingly challenging environment due to strong competition, to develop a product that performs its functions objectively, with quality and mainly with the lowest possible cost, these are the keys to conquer competitive advantage. This paper is intended to explore cost reduction of an automotive system by using the techniques of the methodology EV / AV (Engineering Value / Analysis Value). The analysis are framed as exploratory, in the form of study, with ratings of the components and their functions, followed by the generation of ideas with the completion of an indication of a great potential for a product development with optimized cost.

In a growing global environment, new products development demands balancing regional requirements and resources in the proposed solutions targeting optimal results. The interaction between Development Centers must pursue, following clearly defined rules, proposals that consider factors from all involved regions. This paper proposes description of important aspects to be considered in Car Suspension Global Product Developments.

Manual steering is largely employed on emergent markets and it demands high level performance to be competitive. To achieve customer satisfaction, it is important to understand physically and be able to quantify what is good performance regarding imperative steering aspects. Nevertheless, global projects and quality management require objective measurements and reference numbers. The strategy defining the measurements in order to compare among development steps and benchmark must be studied carefully. Objective measurements and subjective evaluation correlation is necessary to define the reference data. In this project, several cars were evaluated and measured performing standard maneuvers. The maneuvers were performed to obtain appropriated and enough information to understand the performance and to do the correlation. The subjective evaluation was normalized and; using objective data, parameters were calculated to represent properly and in a robust form the driver fills.

The application of press hardening steels (PHS) Al-Si coating has been increasing in body in white vehicles as an approach to meet the demands of safety and CO2 reduction regulations. The vehicle structures with PHS largely depend on the integrity and the mechanical performance of the spots weld. During the spot welding process, intermetallic phase may appear in function of the chemical composition of the steel and coating. One of these intermetallics is the Fe-Al phase which brittleness decreases the strength of the weld joint. In this study, resistance spot welding (RSW) experiments were performed in order to evaluate the influence of the welding parameters of single-lap joints PHS - 22MnB5 steel grade.

In the middle of the global competition, inside the automotive sector, the perceived quality of costumers, related to the beauty and harmony of the outer skin surfaces of motor vehicles, has become one of the main determinant factors in the purchase process decision. In general, the initial perceived quality of a car is determined by an appealing design of its body, the color and gloss of its paint, and also the manufacturing and assembly accuracy of the skin panels. The appealing design makes the skin panel even more complex and hard to produce with current metal forming technologies and the results are often small distortions on the outer surfaces about tens of microns and most of the times paint does not cover such imperfections. Despite the technological advances along the years, surface quality inspection was still being performed by manual and subjective evaluation by experts.

In the automotive industries, time and parts production costs are fundamental, mainly in prototyping production. The RTV (Room Temperature Vulcanized) process is an important alternative production to flexible silicone molds when you need to inject polyurethane parts. The objective is time reduction in tooling production and parts. RTV requires notable initial investments in equipments. Many times, this cost does not fit in the automotive third part company's budget. This work shows how is possible to obtain parts by RTV process with excellent quality, without high investments in equipments and without quality loss in produced parts. Lead times and tooling and parts costs are analyzed. Due to equipments low costs, this alternative is accessible not only to automotive industries but also to small and medium suppliers.

The current study proposes to approach the fatigue behavior of stabilizer bars and specimens manufactured in quenched / tempered and as-received SAE5160 steels with and without a surface micro-notch. Some S-N specimens and stabilizer bars were shot-peened to improve the fatigue strength due to creation of compressive surface residue stresses and by surface plastic strain and others samples received a surface micro-notch of 0.3 mm depth introduced by EDM process. The crack growth evaluation at micro-notch was made comparatively with da/dN-ΔK curves in CT specimens. The proposed experimental study consists of comparative analysis of da/dN-ΔK and S-N curves, fractographic and, metallographic analysis, stabilizer bar bench tests, and after that, it is intended to show the relevant aspects of two microstructural classes currently specified for stabilizer bars, the beneficial effects obtained by shot peening and the bad influences of surface micro-notches.

The current study has the proposal to approach the differences in dynamic behavior between camshaft manufactured in the traditional gray cast iron and an alloyed gray cast iron with the improvement on mechanical properties in order to stresses found on roller finger follower applied systems. The main objective of this paper is to show that camshaft made of modified gray cast iron and heat treated through the remelting process is still a good solution for application with roller finger followers systems which requires higher wear resistance standards. The proposed experimental study consists of comparative analysis of microstructure and hardness, dynamometers tests, dimensional measurements of camshafts, and after that, intends to show the higher performance of this manufacturing process in more severe applications of internal combustion engines.

The automotive competition is growing every day, and automotive products (vehicles and components) are often developed in one country though it's made based on o global architecture, used and applied in other markets, and with the high competition between automakers, engineers can not afford make mistakes during the product development mainly in global architectures. Be the customer or put yourself in the customer's place is the key to good product planning, design, development, and also, marketing, therefore to understand exactly what the customers are complaining about on the current products to consider this lessons learned on the new products the Genchi Genbutsu is key tool to find the root cause of any problem which is the key to a lasting solution and a successful product development. The article describes some successful steps to apply the Genchi Genbutsu during the automotive product development.

This paper proposes a methodology for automotive manufacturing lines scheduling. This methodology is based on generalized stochastic Petri Nets and Markov decision processes with imprecise probabilities. The usual generalized stochastic Petri Nets is extended by allowing imprecision about probabilities to be explicitly represented and by human task time graph of different products to be attached. Once the system is modeled using this tool and its extensions, we translate the resulting models into Markov decision processes with imprecise probabilities, in order to compute optimal policies that will result in the line scheduling. This paper introduces an algorithm that performs this translation.

The present work gives an overview of the current situation of failures that may occur in automotive components, showing their distribution in the vehicle and the causes that make them occur, trying to emphasize the different materials which are used in the manufacturing of these components. This work is a technical approach strictly supported by an engineering concept which aims to discuss the different factors which contribute to cause premature failures of automotive components, prior to their utilization in the field or when they are exposed to the most variable conditions of use. One of the most important objectives of this study is to call the attention of design engineers, research engineers and manufacturing people to the importance of the components integrity which shall be taken into primary consideration in the design phase as well as in the specification of the material and process of manufacturing.

Through computational dynamic simulations is possible to achieve high reliability index in the development of automotive components, thereby enabling the reduction of cost and time of a product development with considerable gain in quality. This work suggests the validation of a methodology for simulation where is possible to improve the confidence level for design flexible components, such Heater and Cooling hoses that are under dynamic engine action, in relation to the physical model. Known the difficulty in predicting non-linear mathematical relationship deformation under effect of forces and moments, was established a study based on experimental measurements where were used as input parameters to simulate the dynamic behavior of flexible components, in this case, coolant hoses.