Search Results

The downsizing of internal combustion engines to increase fuel economy leads to challenges in both obtaining ignition and stabilizing combustion at boosted intake pressures and high exhaust gas recirculation dilution conditions. The use of non-thermal plasma ignition technologies has shown promise as a means to more reliably ignite dilute charge mixtures at high pressures. Despite progress in fundamental research on this topic, both the capabilities and operation implications of emerging non-thermal plasma ignition technologies in internal combustion engine applications are not yet fully explored. In this work, we document the effects of using a corona discharge ignition system in a single cylinder gasoline direct injection research engine relative to using a traditional inductive spark ignition system under conditions associated with both naturally aspirated (8 bar BMEP) and boosted (20 bar BMEP) loads at moderate (2000 rpm) and high (4000 rpm) engine speeds.

Robust control of combustion phasing in Homogenous Charge Compression Ignition (HCCI) engines is a well-recognized challenge limiting the automotive industry for exploiting HCCI benefits in mass production vehicles. Real-time model-based control of combustion phasing is the key to tackle this daunting challenge. In this paper, a new control oriented model is developed for predicting HCCI combustion phasing over a range of engine operation. The model is validated against the experimental data from a single cylinder Ricardo engine. A model-based integral state feedback controller is designed to control HCCI combustion phasing by modulating the ratio of two Primary Reference Fuels (PRFs). The controller's performance is compared with a manually tuned proportional integral controller.

This paper presents results and analysis of experiments carried out on a vehicle platoon control system developed in the PATH program. The objective of this project is to assess the feasibility of applying currently available technology to the concept of vehicle platoon control. It is estimated that the vehicle platoon system could increase highway traffic capacity by a factor of two or three. The Integrated Platoon Control System (IPCS) includes a control system, communication system, data acquisition system, and various sensors including a radar system. The initial experiments using two Ford cars showed successful results. In the field tests, the automated following vehicle successfully followed the manually driven lead vehicle through several different kinds of maneuvers. This project is a joint effort by U.C.Berkeley, Caltrans and VORAD, with vehicles provided by Ford.

Material flammability is an important factor in determining the pressure and composition (fraction of oxygen and nitrogen) of the atmosphere in the habitable volume of exploration vehicles and habitats. The method chosen in this work to quantify material flammability is by its ease of ignition and the minimum (critical) radiant heat flux for ignition. Piloted ignition delay tests were conducted in the Forced Ignition and Spread Test (FIST) apparatus subject to various atmospheric pressures and oxygen concentrations. The ignition delay time was measured as the time it takes a combustible material to ignite after it has been exposed to an external heat flux. In these tests, polymethylmethacylate (PMMA) was exposed to an oxidizer flow velocity of 1 m/s and a range of externally applied heat flux levels from 8 to 14 kW/m2.

Material flammability is an important factor in determining the pressure and composition (fraction of oxygen and nitrogen) of the atmosphere in the habitable volume of exploration vehicles and habitats. The method chosen in this work to quantify the flammability of a material is by its ease of ignition. The ignition delay time was defined as the time it takes a combustible material to ignite after it has been exposed to an external heat flux. Previous work in the Forced Ignition and Spread Test (FIST) apparatus has shown that the ignition delay in the currently proposed space exploration atmosphere (approximately 58.6 kPa and 32% oxygen concentration) is reduced by 27% compared to the standard atmosphere used in the Space Shuttle and Space Station.

We present the effect of EGR, at a set fuel flow rate and intake temperature, on the operating parameters of timing of combustion, duration of combustion, power output, thermal efficiency, and NOx emission; which is remarkably low. We find that addition of EGR at constant inlet temperature and constant fuel flow rate has little effect on HCCI parameter of start of combustion (SOC). However, burn duration is highly dependent on the amount of EGR inducted. The experimental setup at UC Berkeley uses a 1.9-liter 4-cylinder diesel engine with a compression ratio of 18.8:1 (offered on a 1995 VW Passat TDI). The engine was converted to run in HCCI mode by addition of an 18kW air pre-heater installed in the intake system. Pressure traces were obtained using four water-cooled quartz pressure transducers, which replaced the Diesel fuel injectors. Gaseous fuel (propane or butane) flowed steadily into the intake manifold.

This research work has focused on measuring the effect of fuel/air mixing on performance and emissions for a homogeneous charge compression ignition engine running on propane. A laser instrument with a high-velocity extractive probe was used to obtain time-resolved measurements of the fuel concentration both at the intake manifold and from the cylinder for different levels of fuel-air mixing. Cylinder pressure and emissions measurements have been performed at these mixing levels. From the cylinder pressure measurements, the IMEP and peak cylinder pressure were found. The fuel-air mixing level was changed by adding the fuel into the intake system at different distances from the intake valve (40 cm and 120 cm away). It was found that at the intake manifold, the fuel and air were better mixed for the 120 cm fuel addition location than for the 40 cm location.

A summary is presented of experimental results obtained from a Cummins B5.9 175 hp, direct-injected diesel engine fueled with oxygenated diesel blends. The oxygenates tested were dimethoxy methane (DMM), diethyl ether, a blend of monoglyme and diglyme, and ethanol. The experimental results show that particulate matter (PM) reduction is controlled largely by the oxygen content of the blend fuel. For the fuels tested, the effect of chemical structure was observed to be small. Isotopic tracer tests with ethanol blends reveal that carbon from ethanol does contribute to soot formation, but is about 50% less likely to form soot when compared to carbon from the diesel portion of the fuel. Numerical modeling was carried out to investigate the effect of oxygenate addition on soot formation. This effort was conducted using a chemical kinetic mechanism incorporating n-heptane, DMM and ethanol chemistry, along with reactions describing soot formation.

A multi-zone model has been developed that accurately predicts HCCI combustion and emissions. The multi-zone methodology is based on the observation that turbulence does not play a direct role on HCCI combustion. Instead, chemical kinetics dominates the process, with hotter zones reacting first, and then colder zones reacting in rapid succession. Here, the multi-zone model has been applied to analyze the effect of piston crevice geometry on HCCI combustion and emissions. Three different pistons of varying crevice size were analyzed. Crevice sizes were 0.26, 1.3 and 2.1 mm, while a constant compression ratio was maintained (17:1). The results show that the multi-zone model can predict pressure traces and heat release rates with good accuracy. Combustion efficiency is also predicted with good accuracy for all cases, with a maximum difference of 5% between experimental and numerical results.

This research investigates how the handling of mixing and heat transfer in a multi-zone kinetic solver affects the prediction of carbon monoxide and hydrocarbon emissions for simulations of HCCI engine combustion. A detailed kinetics multi-zone model is now more closely coordinated with the KIVA3V computational fluid dynamics code for simulation of the compression and expansion processes. The fluid mechanics is solved with high spatial and temporal resolution (40,000 cells). The chemistry is simulated with high temporal resolution, but low spatial resolution (20 computational zones). This paper presents comparison of simulation results using this enhanced multi-zone model to experimental data from an isooctane HCCI engine.

Road safety is one of the major concerns for automated vehicles. In order for these vehicles to interact safely and efficiently with the other road participants, the behavior of the automated vehicles should be carefully designed. Liu and Tomizuka proposed the Robustly-safe Automated Driving system (ROAD) which prevents or minimizes occurrences of collisions of the automated vehicle with other road participants while maintaining efficiency. In this paper, a set of design principles are elaborated as an extension of the previous work, including robust perception and cognition algorithms for environment monitoring and high level decision making and low level control algorithms for safe maneuvering of the automated vehicle.

This study presents the development of a new HCCI simulation methodology. The proposed method is based on the sequential coupling of CFD analysis prior to autoignition, followed by multi-zone chemical kinetics analysis of the combustion process during the closed valve period. The methodology is divided into three steps: 1) a 1-zone chemical kinetic model (Chemkin Pro) is used to determine either the intake conditions at IVC to achieve a desired ignition timing or the ignition timing corresponding with given IVC conditions, 2) the ignition timing and IVC conditions are used as input parameters in a CFD model (Fluent 6.3) to calculate the charge temperature profile and mass distribution prior to autoignition, and 3) the temperature profile and mass distribution are fed into a multi-zone chemical kinetic model (Chemkin Pro) to determine the main combustion characteristics.

Accelerated market penetration of plug-in electric vehicles (PEVs) is presently restricted by the high cost of batteries. Deployment of grid-connected energy storage, which could increase the reliability, efficiency, and cleanliness of the grid, is similarly inhibited by the cost of batteries. Research, development, and manufacturing are underway to reduce cost by lowering material costs, enhance process efficiencies, and increase production volumes. Another approach under consideration is to recover a fraction of the battery cost after the battery has been retired from vehicular service via reuse in other applications, where it may still have sufficient performance to meet the requirements of other energy-storage applications.

The refinement of heat release analysis stems from the recognition that a combustion system is intrinsically non-linear. Thus, as appropriate for such an entity, its properties are expressed in terms of a thermochemical phase (or state) space, of which the thermodynamic aspects are exposed on a so-called Le Chatelier diagram, providing the fundamental background for the development of micro-electronic control to attain the most effective utilization of fuel. Implementation of this method of approach is illustrated by the analysis of the exothermic process taking place in two typical internal combustion engines, spark-ignition and diesel.

Three factors are of consequence when considering the comparative performance of alcohols and hydrocarbons as spark ignition engine fuels. These are: relative amounts of products of combustion produced per unit of inducted charge, energy inducted per unit of charge, and latent heat differences among the fuels. Simple analysis showed significant increases in output can be expected from the use of methyl alcohol as compared to hydrocarbon and somewhat lesser improvement can be expected from ethyl alcohol. Attendant increases in fuel consumption, disproportionate to the power increase, can also be predicted. More sophisticated analysis, based upon thermodynamic charts of combustion products, do not necessarily improve correspondence between prediction and engine results.

A theoretical and experimental study was undertaken to establish whether or not parametric correlations could be satisfactorily applied to combustion of ammonia in gas turbine combustors. It was found that a usual parameter of the form I (Re)0.7 was satisfactory for establishing blowout limits in modeling. However, the attainable values of chemical loading I were at least an order of magnitude less than those attainable with hydrocarbon fuels.

A single cylinder investigation was conducted to determine concentration of oxides of nitrogen resulting from combustion of ammonia and air in a spark ignition engine over a range of fuel-air ratios typical of normal engine operation with ammonia. Nitric oxide concentrations exceeded that with hydrocarbons. Spectroscopic observations during the expansion process gave concentrations in some instances an order of magnitude greater than exhaust gas determinations. The results imply a different mechanism for nitric oxide formation with ammonia fuel than with hydrocarbons and that some equilibrating process may take place between combustion and exhaust to reduce otherwise even greater than measured exhaust gas concentrations.

This paper reviews the sources of externally radiated automotive piston engine and vehicle noise and describes them in detail. The effects of various design and operational characters on intensity and character of noise, noise measurement, and analysis and identifications procedures are given extensive examination. A summary of current research on the reduction of engine noise is presented.

A digital computer and special program were used, along with new thermodynamic data, to recalculate and extend the scope and range of the classic combustion gas charts of Hottel and co-workers. A series of hydrocarbon and nonhydrocarbon fuels was treated over a range of fuel-air ratios, with temperatures extended up to 7200 R and pressures up to 15,000 psia. This, the first paper of a series, incorporates the resulting charts for isooctane at four mixture ratios ranging from 20% lean to 40% rich. Auxiliary charts for inducted mixture properties determination and a set of sample calculations are also included.

Homogeneous Charge Compression Ignition (HCCI) combustion is a process dominated by chemical kinetics of the fuel-air mixture. The hottest part of the mixture ignites first, and compresses the rest of the charge, which then ignites after a short time lag. Crevices and boundary layers generally remain too cold to react, and result in substantial hydrocarbon and carbon monoxide emissions. Turbulence has little effect on HCCI combustion, and may be most important as a factor in determining temperature gradients and boundary layer thickness inside the cylinder. The importance of thermal gradients inside the cylinder makes it necessary to use an integrated fluid mechanics-chemical kinetics code for accurate predictions of HCCI combustion. However, the use of a fluid mechanics code with detailed chemical kinetics is too computationally intensive for today's computers.