Refine Your Search

Date

Date

Topic

Topic

Data management Ferrous metals G-14 Americas Aerospace Quality Standards Committee (AAQSC)

Search Results

Viewing 1 to 20 of 40
12Next >Last >>
Sort by published
Standard

Quality Management Systems - Nonconformance Documentation - Word Format
2007-09-26
AS9131AW
AS9131 - This standard defines the common nonconformance data definition and documentation that an internal or external supplier or sub-tier supplier must submit when informing a customer of a nonconformity. The requirements shall be are applicable for reporting a nonconforming product to the owner/operator (i.e., end item user), if specified by contract. Reporting of nonconformance data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.
Standard

AS9000 AUDIT SUMMARY AND SUPPLIER PROFILE INSTRUCTIONS
1997-08-01
HISTORICAL
AS9000-APPNDX1
To assure customer satisfaction, aerospace industry manufacturers must produce world class quality products at the lowest possible cost. AS9000 standardizes, to the greatest extent possible, the quality system requirements of the aerospace industry. Standardization of compliance requirements results in cost savings due to the elimination or reduction of unique requirements developed for each different customer. AS9000 Appendix 1, AS9000 Audit Summary and Supplier Profile Instructions, facilitates the standardization of this process.
Standard

Requirements for Registration of Quality Systems to AS9000 or AS9100
2001-07-01
HISTORICAL
AIR5359A
These requirements are applicable to Accreditation Bodies, Registrars and OEMs, when specified by an aerospace company requiring assessment and/or registration of their quality system in accordance with the requirements of this document. The quality management system standard shall be AS9000 or AS9100 and shall be applied to the organization’s complete Quality System that covers aerospace products.
Standard

Requirements for Certification/Registration of Aerospace Quality Management Systems
2003-07-23
HISTORICAL
AIR5359B
The requirements defined in this AIR are applicable to Accreditation Bodies (ABs), Certification/Registration Bodies (CRBs), and Original Equipment Manufacturers (OEMs), during assessment and/or certification/registration to the applicable quality management system standard to meet industry accepted practices.
Standard

Statistical Product Acceptance Requirements Using Isolated Lot Sampling Methods
2005-10-27
HISTORICAL
ARP9013/1
The purpose of this SAE Aerospace Recommended Practice (ARP) is to ensure conformance for each product characteristic being verified in a lot, without maintaining information from previous lots. ARP9013/1 specifies a product acceptance system for isolated lots. For example, isolated lot sampling avoids keeping track of the normal, tightened, and reduced levels of sampling formerly used in MIL-STD-105 and currently used in ANSI/ASQC Z1.4. Because those switching rules provided significant long-term protection for product quality, these isolated lot tables replace that protection in other ways.
Standard

A Process Standard for the Storage, Retrieval and Use of Three-Dimensional Type Design Data
2003-09-04
HISTORICAL
ARP9034
This document describes requirements for standardized processes (and associated technologies) that ensure type design data are retrievable and usable for the life of a type certificate (50+ years). These processes are primarily concerned with, but not limited to, digital type design data retained in three-dimensional representations and associated data that is required for complete product definition, such as tolerances, specification call-outs, product structure and configuration control data, etc. This process standard includes process requirements for managing the evolution of technologies required to ensure the availability of the data for the life of the product. This data must be available to meet regulatory, legal, contractual and business requirements. This process standard is not intended to incorporate every company specific requirement and does not dictate specific organizational structures within a company.
Standard

A Process Standard for the Storage, Retrieval and Use of Three-Dimensional Type Design Data
2015-04-21
CURRENT
ARP9034A
This document describes requirements for standardized processes (and associated technologies) that ensure type design data are retrievable and usable for the life of a type certificate (50+ years). These processes are primarily concerned with, but not limited to, digital type design data retained in three-dimensional representations and associated data that is required for complete product definition, such as tolerances, specification call-outs, product structure and configuration control data, etc. This process standard includes process requirements for managing the evolution of technologies required to ensure the availability of the data for the life of the product. This data must be available to meet regulatory, legal, contractual and business requirements. This process standard is not intended to incorporate every company specific requirement and does not dictate specific organizational structures within a company.
Standard

Direct Delivery Authorization Guidance for Aerospace Companies
2005-09-09
HISTORICAL
ARP9107
Limited to the Commercial Aerospace industry where a request is made for a Production Organization (PO) to have Direct Delivery Authorization (DDA), which includes an Appropriate Arrangement (AA) between the PO and the Design Organization (DO). In this process the DO is responsible for ensuring the continuous updating of design and airworthiness data to the PO, whilst the PO is responsible for assurance that the manufactured article conforms to Approved Design and Airworthiness Data. The PO is responsible to provide airworthiness release documentation.
Standard

Direct Delivery Authorization Guidance for Aerospace Companies
2017-11-09
CURRENT
ARP9107A
Limited to the commercial aerospace industry where a request is made for a PO to have Direct Delivery Authorization (DDA), which includes an Appropriate Arrangement (AA) between the PO and the Design Organization (DO). In this process the DO is responsible for ensuring the continuous updating of design and airworthiness data to the PO, whilst the PO is responsible for assurance that the manufactured article conforms to approved design and airworthiness data. The PO is responsible to provide airworthiness release documentation.
Standard

Supplier Self Verification Process Delegation Programs
2007-09-26
HISTORICAL
AS9015
This SAE Aerospace Standard (AS) further defines the requirements for a delegation process identified in Aerospace Quality Management System (AQMS) standards (i.e., AS9100, AS9110, AS9120). This standard establishes minimum requirements for the delegation of product verification to an organization’s suppliers; outlining requirements for the initial delegation (qualification/selection), maintenance, and removal/withdrawal of delegations.
Standard

Data Matrix (2D) Coding Quality Requirements for Parts Marking
2002-02-26
HISTORICAL
AS9132
This Standard defines uniform Quality and Technical requirements relative to metallic parts marking performed in using "Data Matrix symbology" (2D) coding used within the aerospace industry. The ISO 16022 specifies general requirements (data characters encodation, error correction rules, decoding algorithm, etc.). In addition to this specification, part Identification with such coding is subject to the following requirements to ensure electronic reading (scanning) ability of the symbol. The marking processes covered by this standard are as follows: Dot Peening Laser Marking Electro-Chem Etching Further marking processes will be included if required. Unless specified otherwise in the contractual business relationship, the company responsible for the design of the part shall determine the location of the Data Matrix Marking. Symbol position should allow illumination from all sides for readability.
Standard

Aerospace Series - Certificate of Conformity Requirements
2022-12-07
CURRENT
AS9163
This SAE Aerospace Standard (AS) provides a harmonized process and documentation requirements for the establishment of CoCs used to attest the conformity of aviation, space, and defense products (e.g., assemblies, sub-assemblies, equipment and systems, parts, material, software) or services. It includes a CoC template and supporting instructions on how to complete it. When quoted by the customer in a contractual requirement, application of this document is mandatory. In other cases, its use is recommended, but if there is a conflict between the requirements of this standard and customer or applicable statutory/regulatory requirements, the latter shall take precedence.
Standard

Aerospace – Customer Identified Major Quality Management System Nonconformity Other Party Collaborative Corrective Action Process
2021-10-18
CURRENT
AS9018
This standard is applicable to AQMS COs listed in the Online Aerospace Supplier Information System (OASIS) database. This standard is intended for the management and resolution of AQMS CO’s major QMS nonconformities. This standard is not intended to address QMS nonconformities classified as minor or nonconformities related to the products or services provided by the CO.
Standard

Qualification Procedure for Aerospace Standard Parts
2002-07-16
HISTORICAL
AS9133
This document provides a basic uniform method for ensuring that aerospace standard parts (products) conform with the requirements of technical specifications referring to qualified parts and for a manufacturer of such parts to have a qualified management system at least equivalent to AS/EN/SJAC9100. These standards apply when called out in the aerospace standard part standard.
Standard

Qualification Procedure for Aerospace Standard Products
2016-04-20
CURRENT
AS9133A
This standard defines a system for the qualification of standard products for aviation, space, and defense applications. It defines the principles that shall be adhered to when carrying out product qualification; applied in conjunction with the rules and procedures of the CA. The system enables the CA to confirm compliance is achieved and maintained, in accordance with the requirements of its product definition and associated controlling technical specifications by an Original Component Manufacturer (OCM) of standard products. This standard requires an OCM that has been granted product qualification approval to ensure applicable approvals are maintained and renewed in accordance with the CA’s quality system for that qualified product. OCMs and OCM designated Value Added Distributors (VADs) requesting product qualification to this standard, shall as a prerequisite, maintain 9100 standard quality management system certification approval.
Standard

Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs
2007-03-29
HISTORICAL
AS9104/2
These requirements are applicable to IAQG global sectors when utilizing Aerospace Industry Controlled Other Party (ICOP) schemes for the assessment and certification of supplier quality systems in accordance with the requirements contained in 9104. IAQG member companies have committed to perform sufficient oversight of the Aerospace accreditation/certification assessment processes in order to ensure conformance to established requirements contained in 9104. NOTE: The IAQG OPMT oversight structure is depicted graphically in Appendix A.
12Next >Last >>
X