Standard
STEEL Nickel Molybdenum
1939-12-04
HISTORICAL
AMS6315
Search Results
Standard
STEEL COTTER PINS, GALVANIZED Low Carbon
1942-12-01
CURRENT
AMS7212
Standard
Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated, Precipitation Hardenable
2000-05-01
HISTORICAL
MAM5598B
This specification covers a corrosion and heat resistant nickel alloy in the form of sheet, strip, and plate procured in SI (metric) units.
Standard
Contamination definition for Fuel Tank Inerting Systems
2016-02-01
WIP
AIR6374
The scope of this document is to provide a guidance of the common contamination types and their concentrations in order to size FTIS components and characterize its performance on generic commercial aircraft.
Standard
Adapter, Closed-Circuit Fuel Servicing
2021-03-11
WIP
AS6848
Aircraft-mounted Closed Circuit Refueling receiver adapter – Definition of standard interface dimensions for adapter which interfaces with MIL-PRF-52747F Nozzle.
Standard
G8II AA Heavy Duty Corrosion Inhibiting Compound
2020-11-23
WIP
G820AB
Performance based requirements to enhance corrosion protection on the airframe.
Standard
Fuel Tank Inerting System Ground and Flight Test Methodology Recommended Practice
2015-05-19
WIP
ARP6063
This SAE Aerospace Recommended Practice (ARP) provides guidance for the verification and certification of a “commercial” fixed wing aircraft fuel tank inerting system (FTIS) and will provide technical references and data regarding ground and flight testing of an FTIS. The intent of this ARP is to address issues associated with the verification requirements based on current regulatory guidance per AC25.981-2C
Standard
Standard for Fuel Additive Injection Equipment Used During the Refueling of Aircraft.
2022-04-29
WIP
ARP8465
To cover all forms of equipment used to inject/blend additive into the fuel flowing from the refueling equipment to the aircraft. For any additive, injected by any means. We plan 4 basic types of equipment from fully manual to fully automatic.
Standard
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
2021-06-28
CURRENT
AMS4128E
This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.7 mm) to 8.000 inches (203.2 mm) in nominal diameter or least difference between parallel sides and up to 50 square inches (322.6 square centimeters) in cross-sectional area (see 8.7).
Standard
SLEEVE, CHAFE PROTECTION, WRAP-AROUND, SELF-CLOSING (-55 TO +175 °C)
2022-06-27
CURRENT
AS60491/6
Standard
Adhesive, Polyimide Resin, Film and Paste High Temperature Resistant, 315 °C (599 °F)
2022-01-20
CURRENT
AMS3686A
This specification covers a high-temperature, electrical grade, polyimide resin adhesive in the form of film or paste.
Standard
FABRIC, GLASS, VINYL COATED
1978-04-01
HISTORICAL
AMS3664A
This specification covers four types of glass cloth coated on both sides with a flexible, vinyl-copolymer resin, the type of glass cloth varying with nominal thickness of the product.
Standard
FABRIC, GLASS, VINYL COATED
1953-02-01
HISTORICAL
AMS3664
Standard
CLOTH, GLASS, VINYL COATED
1994-04-01
HISTORICAL
AMS3664B
This specification covers four types of glass cloth (See 3.1) coated on both sides with a flexible, vinyl-copolymer resin, the type of glass cloth varying with nominal thickness of the product.
Standard
Cloth, Glass, Vinyl Coated
2012-01-16
CURRENT
AMS3664C
This specification covers four types of glass cloth (See 3.1) coated on both sides with a flexible, vinyl-copolymer resin, the type of glass cloth varying with nominal thickness of the product.
Standard
ALUMINUM BRONZE 90.5Cu - 7.5Al - 1.9Si
1958-08-15
HISTORICAL
AMS4631C
Standard
ADHESIVE, MODIFIED EPOXY Moderate Heat Resistant, 250 F (121.1 C) Curing, Film Type
1968-05-01
HISTORICAL
AMS3693
Standard
ADHESIVE COMPOUND, EPOXY High Temperature Application
1960-01-01
HISTORICAL
AMS3692
Standard
Adhesive Compound, Epoxy Resin High Temperature Application
2022-01-20
CURRENT
AMS3692C
This specification covers a two-component adhesive compound, an epoxy resin base and a hardener, in the form of a paste.
Standard
ADHESIVE COMPOUND, EPOXY High Temperature Application
1986-04-01
HISTORICAL
AMS3692A
This specification covers a two-component compound, an epoxy resin base and a hardener in the form of a paste.
