Search Results

Measurement of chest compression is vital to properly assessing injury risk for restraint systems. It directly relates chest loading to the risk of serious or fatal compression injury for the vital organs protected by the rib cage. Other measures of loading such as spinal acceleration or total restraint load do not separate how much of the force is applied to the rib cage, shoulders, or lumbar and cervical spines. Hybrid III chest compression is biofidelic for blunt impact of the sternum, but is “stiff” for belt loading. In this study, an analysis was conducted of two published crash reconstruction studies involving belted occupants. This provides a basis for comparing occupant injury risks with Hybrid III chest compression in similar exposures. Results from both data sources were similar and indicate that belt loading resulting in 40 mm Hybrid III chest compression represents a 20-25% risk of an AIS≥3 thoracic injury.

The purpose of this study is to provide an understanding of driver kinematics, injury mechanisms and spinal loads causing thoracolumbar spinal fractures in Indianapolis-type racing car drivers. Crash reports from 1996 to 2006, showed a total of forty spine fracture incidents with the thoracolumbar region being the most frequently injured (n=15). Seven of the thoracolumbar fracture cases occurred in the frontal direction and were a higher injury severity as compared to rear impact cases. The present study focuses on thoracolumbar spine fractures in Indianapolis-type racing car drivers during frontal impacts and was performed using driver medical records, crash reports, video, still photographic images, chassis accelerations from on-board data recorders and the analysis tool MADYMO to simulate crashes. A 50th percentile, male, Hybrid III dummy model was used to represent the driver.

This paper describes the results of an ongoing project in the GM Motorsports Safety Technology Research Program to investigate Indianapolis-type (Indy car) race car crashes using an on-board impact recorder as the primary data collection tool. The paper discusses the development of specifications for the impact-recording device, the selection of the specific recorder and its implementation on a routine basis in Indy car racing. The results from incidents that produced significant data (crashes with peak decelerations above 20 G) during the racing seasons from 1993 through the first half of 1998 are summarized. The focus on Indy car crashes has proven to provide an almost laboratory-like setting due to the similarity of the cars and to the relative simplicity of the crashes (predominantly planar crashes involving single car impacts against well-defined impact surfaces).

Nitro Fuel Funny cars have 7-8,000 hp and travel 330 mph in a quarter mile. These cars experience extreme forces in normal operation. One phenomenon familiar to drag racers is tire shake. Mild cases can cause loss of traction and vision. Extreme cases can cause injury or death. In March of 2007, a study and subsequent revision of the passenger compartment in a Fuel Funny car was performed after a fatal accident due to extreme tire shake. Tire shake on a drag race car normally occurs when the force on the rear tire causes the tire to roll over itself causing a loss of traction and side-to-side vibration. In other cases, if the tire fails at high speed, the tire may partially separate, causing an extreme vibration in the cockpit of the car. The vibration may set up a harmonic in the chassis, which is transferred to the driver since the rear end is bolted directly to the chassis with no suspension to absorb the energy.

A MADYMO model of a racing car and driver was driven by 3-D accelerations recorded in actual crashes. Helmet, belt restraint, and padding characteristics were obtained from dynamics tests. Model results of HIC, head accelerations and neck forces and moments were studied along with driver injuries to provide insight into the efficacy of current injury assessment parameters used with the head and neck of crash test dummies. The results are also used to discuss the kinematics performance of the crash test dummy neck as modeled by the MADYMO version of the Hybrid III midsize male crash test dummy.

This paper presents the rationale behind the development of a shoulder belt load cell suitable for application in racings cars. The design of the load cell and the operational parameters necessary for a research-quality measurement device for biomechanics research in racing car crashes and the performance of the device in sled tests are described.

This study is an extension of previous work on driver air bag deployment loads which used the mid-size male Hybrid Ill dummy. Both small female and mid-size male Hybrid Ill dummies were tested with a range of near-positions relative to the air bag module. These alignments ranged from the head centered on the module to the chest centered on the module and with various separations and lateral shifts from the module. For both sized dummies the severity of the loading from the air bag depended on alignment and separation of the dummy with respect to the air bag module. No single alignment provided high responses for all body regions, indicating that one test at a typical alignment cannot simultaneously determine the potential for injury risk for the head, neck, and torso. Based on comparisons with their respective injury assessment reference values, the risk of chest injury appeared similar for both sized dummies.

There are many mechanisms for ankle injury to front seat occupants involved in automotive impacts. This study addresses injuries to the ankle joint involving inversion or eversion, in particular at high rates of loading such as might occur in automotive accidents. Injuries included unilateral malleolar fractures and ligament tears, and talus and calcaneous avulsions. Twenty tests have been performed so far, two of them using Hybrid III lower leg and the rest using cadaveric specimens. The specimens were loaded dynamically on the bottom of the foot via a pneumatic cylinder in either an inversion or eversion direction at fixed dorsiflexion and plantarflexion angles. The applied force and accelerations have been measured as well as all the reaction forces and moments. High-speed film was used to obtain the inversiordeversion angle of the foot relative to the tibia and for following ligament stretch.

The purpose of this paper is to establish injury assessment reference values specific to the CRABI 6-Month infant dummy for use in evaluating the interaction of rear-facing infant restraints with a deploying passenger airbag. The available literature on the biomechanics of child injury and mechanical response and the results of impact tests with various child and infant dummies are reviewed and summarized. Estimations of the injury assessment reference values for use with the CRABI 6-Month dummy are made using scaling techniques based on the principles of dimensional analysis and dummy test data from infant restraint tests under conditions where injuries are not likely to occur. The information developed in this report will allow the assessment of injury potential in tests of the interaction of passenger airbags with rear-facing infant restraints. This issue is of particular importance to vehicles with only front seats, such as pickup trucks and sport vehicles.

Biomechanical data on the response of the face to localized and distributed loads are analyzed to provide performance goals for a biomechanically realistic face. Previously proposed facial injury assessment techniques and dummy modifications are reviewed with emphasis on their biomechanical realism. A modification to the Hybrid III dummy, called the GM Hybrid III Deformable Face, is described. The modification produces biomechanically realistic frontal impact response for both localized and distributed facial loads and provides for contact force determination using conventional Hybrid III instrumentation. The modification retains the anthropometric and inertial properties and the forehead impact response of the standard Hybrid III head.

Axial loading of the calcaneus-talus-tibia complex is an important injury mechanism for moderate and severe vehicular foot-ankle trauma. To develop a more definitive and quantitative relationship between biomechanical parameters such as specimen age, axial force, and injury, dynamic axial impact tests to isolated lower legs were conducted at the Medical College of Wisconsin (MCW). Twenty-six intact adult lower legs excised from unembalmed human cadavers were tested under dynamic loading using a mini-sled pendulum device. The specimens were prepared, pretest radiographs were taken, and input impact and output forces together with the pathology were obtained using load cell data. Input impact forces always exceeded the forces recorded at the distal end of the preparation. The fracture forces ranged from 4.3 to 11.4 kN.

This paper describes the initial phases of an on-going project in the GM Motorsports Safety Technology Research Program to investigate Indy car crashes using an on-board impact recorder as the primary data collection tool. The development of a database consisting of crash investigation data patterned after national highway crash databases is discussed. The data gathered and coded includes track and incident scene information, vehicle damage, and driver injuries, as well as the vehicle decelerations measured by the impact recorder. The paper discusses the development of specifications for the impact device, the selection of the specific recorder and its implementation on a routine basis in Indy car racing. The results from incidents that produced significant data during the 1993, 1994 and 1995 racing seasons are summarized.

Race car nets have been used for years to keep the drivers head and arms inside the structure of the race car during an accident. Recent testing by GM Racing has shown that a net placed near the driver's shoulder and head on the right side can significantly reduce head excursion and thereby reduce neck tension in a side impact. The reduced neck tension prevents neck injury and basilar skull fracture. The right side net also improves seat stiffness and reduces seat deflection in side impacts.

The objective of this work was to evaluate a new tool for assessing brain injury. Many race car drivers have suffered concussion and other brain injuries and are in need of ways of evaluating better head protective systems and equipment. Current assessment guidelines such as HIC may not be adequate for assessing all scenarios. Finite element models of the brain have the potential to provide much better injury prediction for any scenario. At a previous Motorsports conference, results of a MADYMO model of a racing car and driver driven by 3-D accelerations recorded in actual crashes were presented. Model results from nine cases, some with concussion and some not, yielded head accelerations that were used to drive the Wayne State University Head Injury Model (WSUHIM). This model consists of over 310,000 elements and is capable of simulating direct and indirect impacts. It has been extensively validated using published cadaveric test data.

Recent developments in seat design for racecar drivers have proven to be very effective in minimizing injuries in side impacts. The features of the seats that present significant improvements over previous concepts are based on biomechanical principles that were learned from crash recorder based investigations of Indy car crashes. Insights gained from these studies led to an understanding of critical factors that provide effective support and protection of the driver in a high-severity side impact crash. Transferring these concepts from single seat chassis cars to stock car and sports car seats has led to significant improvements in driver side impact protection. The paper will describe these principles, present sled test performance data showing the benefits of proper seat design and will give examples of current commercially available seat designs for stock car and sports car racing.

This paper discusses the development of adequate criteria and evaluation methods for seat belt restraint design. These criteria should include the effect of seat belts in abdominal injury as well as head injury. It is concluded that belt load limiters and energy-absorbing devices should limit head-to-vehicle contact, ensure that the lap belt maintains proper contact with the bony pelvic girdle, and limit the belt loads. Studies are made of pulse shape and belt fabrics. Currently available mathematical models are used for the studies included in the paper.

Data on towaway accidents involving 1973- and 1974-model American passenger cars were collected according to a systematic sampling plan in order to measure 1974 restraint system performance. The data on 5,138 drivers and right front passengers were collected by three organizations: Calspan Corporation, Highway Safety Research Institute, and Southwest Research Institute. Analysis of the data showed that the 1974 ignition interlock system increased full restraint system usage by a factor of 10 over 1973 cars. The 1974 full restraint system (lap and upper-torso belts) also demonstrated a greater reduction in severe injuries (AIS≥2) than the 1973 lap-belt-only system. Paradoxically, little reduction in 1974-model severe injuries was found when the two model years were compared, although no attempt was made to control for confounding factors in the accident cases.

This paper is a brief review of the complex subject of human injury mechanisms and impact tolerance. Automotive accident-related injury patterns are briefly described and the status of knowledge in the biomechanics of trauma of the head, neck, chest, abdomen and extremities is discussed.

The response of the head to impact in the posterior-to-anterior direction was investigated with live anesthetized and post-mortem primates.* The purpose of the project was to relate animal test results to previous head impact tests conducted with cadavers (reported at the 21st Stapp Car Crash Conference (1),** and to study the differences between the living and post-mortem state in terms of mechanical response. The three-dimensional motion of the head, during and after impact, was derived from experimental measurements and expressed as kinematic quantities in various reference frames. Comparison of kinematic quantities between subjects is normally done by referring the results to a standard anatomical reference frame, or to a predefined laboratory reference frame. This paper uses an additional method for describing the kinematics of head motion through the use of Frenet-Serret frame fields.

Detailed investigations of automobile crashes in which children under 10 years old were passengers were carried out. The purpose of this study was to investigate the injury patterns of restrained and unrestrained children and to assess the performance of child restraint systems in real world crashes. Crashes which occurred mainly in Washtenaw and Oakland counties of the state of Michigan were surveyed. A total of 348 vehicle crashes involving 494 children less than 10 years old were identified. Forty eight crashes involving 63 children were selected for in-depth investigation. 37% of the children in the investigated cases were restrained by an adult lap belt or a child restraint. It was found that only 4.7% of the children in the overall sample were restrained. Both adult seat belts and child restraints (when used) were found to be effective in reducing injuries in crashes. Head and facial injuries were found to be the most common form of injury to children.