Search Results

This four-hour short course provides an introduction to fluids for aerospace hydraulic systems. Topics covered include an introduction to basics fluid properties, rheology, tribology, and fluid product development. In addition, the history and performance of different classes of fluids are discussed in detail, and specific failure modes such as erosion and sludge formation will be described. Along with an introduction to fluid degradation, information on used oil analysis test methods and interpretation will be provided.

The automated vehicle industry has been busy designing, developing, and deploying several self driving vehicles and services in the last few years. However, much of the outcomes and the overall outlook of the vehicle and services, such as robotaxis, are not great. Customers and stakeholders complain that the level of automation is low, mostly SAE Levels 1, 2, and very little of Level 3. It appears that Level 4 is far out in the horizon and many wonder if Level 5 is actually achievable.

One of the most important safety critical components on cars, trucks, and aircraft is the pneumatic tire. Vehicle tires primarily control stopping distances on wet and dry roads or runways and strongly influence over-steer/under-steer behavior in handling maneuvers of cars and trucks. The inflated tire-wheel assembly also acts as a pressure vessel that releases a large amount of energy when catastrophically deflated. The tire can also serve as a fulcrum, both directly and indirectly, in contributing to vehicle rollover. This course covers these facets of tire safety phenomena.

Inductive and deductive safety analyses play an essential role within the ISO 26262 safety life cycle. Qualitative analysis methods are used to identify failures whereas quantitative methods are utilized to predict the frequency of failures. This one-day training class introduces the fundamentals of common safety analysis methods such as FMEA, FMEDA, and FTA and discusses the role of these methods in the development of safety-related E/E systems as per ISO 26262.

Ensuring the safety of a driving automation system encompasses two aspects, namely (1) the avoidance of unreasonable risk caused by malfunctioning behavior of the system as well as (2) the avoidance of unreasonable risk caused by hazards associated with the intended functionality and its implementation, e.g. due to performance limitations. The first aspect - known as functional safety - has been addressed by the industry for quite some time already and is described by the established ISO 26262 standard.

ISO 26262 provides an internationally recognized reference for the development of safety-related automotive E/E systems. Developers of such systems need to understand and implement the standard’s requirements pertaining to system, hardware, and software development. This training class provides a systematic introduction to key concepts of ISO 26262 and their practical application, covering the concept phase including hazard analysis and risk assessment (HARA) as well as the subsequent system, hardware, and software development phases.

A key design objective in the development of modern motor vehicles is ensuring functional safety. The safety standard ISO 26262 "Road vehicles - Functional safety" describes a lifecycle model for the development of safety-relevant electrical or electronic (E/E) systems in automobiles. This training class will provide you with the necessary knowledge for the practical application of ISO 26262 and shed light on how to implement the standard in your daily work projects. The duration and thematic focus will be tailored to your specific needs.

As part of the release of ISO 26262 in 2011, requirements to establish confidence in the correct functioning of software tools used to develop safety-related automotive E/E systems came into effect. A decade later, there are plenty of experiences and lessons learned from applying these requirements in day-to-day engineering. However, implementing ISO 26262 tool classification and qualification remains a challenge for many automotive organizations and remains resource intensive.

This course content provides the Civil Aviation Safety Engineers (Systems - Electrical) with the knowledge and skills to conduct oversight of aviation safety, aircraft certification and Continued Operational Safety. These areas of responsibility include, but are not limited to, Type Certification, Amended Type Certification, Supplemental Type Certification, Parts Manufacturing Approval (PMA), Technical Standard Order (TSO) Continued Operational Safety, Flight manuals, and Operational Approvals.

This two-day course presents a process development methodology that can be used repeatedly as new compliance requirements emerge.  You will learn best practices in creating a compliance program for your products and markets, and how to use this program at all stages of product development and production.  Sample spreadsheets will be used to demonstrate tailoring the program to your product, your markets, and your organization.  A properly managed compliance program simplifies the certification or approval of your product, and ensures that you regularly apply and document good engineering practices for product safety and reliability.

SAE International will host a series of webinars that will cover the recently published and completely new Euro NCAP Rating Scheme for 2026 and beyond. This rating scheme supports the Euro NCAP Vision 2030 Roadmap. e-Learning coming soon!

According to NHTSA, there were 932 vehicle recalls in the United States in 2022, affecting approximately 31 million vehicles; 39 electric vehicle recalls affecting more than 1.3 million vehicles, and 56 ADAS recalls affecting more than 4.7 million vehicles. Furthermore, Warranty Week reports that Worldwide Auto Manufacturers allocated a total of $54.7 billion for future warranty repairs or $670 per vehicle sold in 2022. 2023 Consumer Report indicates that Electrical Vehicles have 79% more reliability issues than ICE vehicles.

Potential regulations surrounding the development, testing and commercial launch of Highly Automated Vehicles and possible liability exposure for the manufacturing and operation of Highly Automated Vehicles are fluid and changing areas, that will continue to evolve over the next several years. The first half of this course reviews where regulations are at the state and federal levels, what actions are currently under consideration, how current regulations will need to change to accommodate HAV’s, and how and when new regulations might be implemented. The second half covers both common law and strict liability and how it may apply to HAV’s.

This course describes the basic elements of the process for achieving a successful aircraft certification globally once certification by the State of Design has been accomplished. The regulatory framework established under ICAO is presented with discussion of how major countries around the world comply with the ICAO Standards and Recommended Practices (SARPs). The uncertainty of how each country performs validation is a challenge. This course identifies common validation practices and key bilateral agreements which facilitate acceptance of aviation products from one country to another.

Model-based software development has become state of the art for automotive embedded applications. Toolchains have been established, and methods and procedures have been defined to address the strong requirements of functional safety standards. Best practices within general software development, however, propose to overcome strict waterfall process models and promote agile methods in order to address real-world challenges, such as late changes or vague requirements. These real-world scenarios exist in automotive software development, and agile methods will also be beneficial here.

This training class will introduce you to fundamental aspects of working with modeling guidelines and to the static model analysis of MATLAB Simulink/Stateflow, TargetLink, and Embedded Coder models. Furthermore, you will learn how to create MISRA- and ISO 26262-compliant models using proven modeling standards and best practices. The spotlight will be placed on how you can best integrate the MES Model Examiner (MXAM) into your process. Via several hands-on sessions, you will have the chance to practice reliably deploying guidelines with MXAM and ensure guideline compliance.

This training class provides a practical overview of developing and safeguarding embedded software on the basis of Simulink and code generators like Embedded Coder and TargetLink within the framework of serial projects. The training class takes participants through all process steps from designing and creating the simulation model in Simulink and Stateflow to generating production code. Model quality assurance consists of verifying the model and software architecture, safeguarding the modeling guidelines, as well as checking for functional compliance with requirements in the model test.

This training class provides a comprehensive overview of the principles, processes, and objectives of model testing – from requirements to model tests. We offer step-by-step guidance from creating requirements-based test specifications, through testing TargetLink and/or Embedded Coder models, to automated test evaluation based on test assessments and back-to-back/regression tests. In particular, we will emphasize ISO 26262-compliant test management and explain the test process for MiL and SiL, as well as tracing requirements to test specifications and test assessments.

Fatigue is a structural failure mode that must be recognized and understood to develop products that meet life cycle durability requirements. In the age of lightweighting, fatigue strength is an important vehicle design requirement as engineers struggle to meet stringent weight constraints without adversely impacting durability. This technical concept course introduces the fatigue failure mode and analysis methods. It explains the physics of material fatigue, including damage accumulation that may progress to product failure over time, and it provides the needed foundation to develop effective fatigue prediction capabilities.

This course is offered in China only and presented in Mandarin Chinese. The course materials are bilingual (English and Chinese). Model-Based Development and Verification (MBDV) technology has been widely accepted in software production. When this technology is used in airborne software, key issues should be considered to ensure airworthiness and safety goals are met. To facilitate the use the MBDV technology, RTCA DO-331 is published as a supplement and guidance support to DO-178C. Because MBDV is regularly used in critical software applications, guidance is needed to apply it to airborne software.