Search Results

With increasing efforts towards rapid electrification of powertrains, NVH engineers face new set of challenges. Elimination of the IC engines drastically reduces powertrain borne noise levels but unmasks other existing noises like wind, road, ancillary devices, and squeak & rattle. In addition, the new tonal sounds from electro-mechanical drive systems makes the noise more annoying even though it is lesser quantitatively. In summary, the electrification of powertrains has shifted powertrain NVH development from overall level to sound quality with different targets requiring several electro-mechanical solutions with innovative simulation, testing, and optimization approaches. The purpose of the paper is to present an approach to detect, quantify, and optimize the structure-borne radiated noise of an electric motor due to electromagnetic forces or maxwell pressure exerted by magnetic effects in electric motor.

A low profile high directivity antenna is designed to operate at 5.9 GHz for Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) communications to ensure connectivity in different propagation channels. Patch antennas are still an ongoing topic of interest due to their advantages: low profile, low cost, and ease of fabrication. One disadvantage of the patch antenna is low directivity which results in low range performance. In this paper, we introduce an efficient and novel way to improve the directivity of patch antenna using topology optimization and design of experiments (DoE). Numerical simulations are done using Method of Moments (MoM) technique in the commercially available tool, FEKO. We use global response surface method (GRSM) for double objectives topology optimization. Numerical results show a promising use of topology optimization and DoE techniques for the systematic design of high directivity of low profile single element patch antennas.

Explicit method is commonly used in crashworthiness analysis due to its capability to solve highly non-linear problems without numerous iterations and convergence problems. However, the time step for explicit methods is limited by the time that the physical wave crosses the element. Therefore, to avoid large amount of CPU time, the explicit method is usually used for non-linear dynamic problems with a short period of simulation duration. For problems under quasi-static loading conditions at pre-crash and post-crash, implicit method could be more efficient than explicit methods because the required computation time is much shorter. Due to the recent advance of crash codes, which allows both implicit and explicit computations to be performed in the same code, crash engineers are able to use explicit computation for crash simulation as well as implicit computation for some of the pre-crash quasi-static loading or post-crash spring back simulations.

The purpose of this paper is to demonstrate a process to automatically modify and optimize a damping curve for a specific road input. Off road race vehicles are required to maintain high speeds over difficult terrain. This requires large wheel displacements, and shocks tuned to properly damp wheels motions using available wheel travel. Selection of proper damping values allows full use of available suspension travel while minimizing loads and accelerations experienced by the vehicle and driver. Using Altair's MotionView and HyperStudy, a process is demonstrated where a damping curve can be modified based on specific constraints and performance criteria. A full vehicle MotionView model of a generic off-road race car will be simulated driving over a large obstacle. Using optimization techniques within HyperStudy, the characteristics of the damping curve will be modified so that pitch displacement and vertical accelerations on the vehicle and driver are minimized.

Specific energy absorption (SEA) is a quantitative measure of the efficiency of a structural member in absorbing impact energy. For an extruded aluminum crash can, SEA generally depends upon the topology of its cross-section. An investigation is carried out to determine the optimal cross-sectional topologies for maximizing SEA while considering manufacturing constrains such as, permissible die radii, gauges, etc. A comprehensive DOE type matrix of cross-sectional topologies has been developed by considering a wide variety of practical shapes and configurations. Since it is critical to include all feasible topologies, much thought and care has been given in developing this matrix. Detailed finite element crash analyses are carried out to simulate axial crushing of the selected crash cans topologies and the resulting specific energy absorption (SEA) is estimated for each case.

Many recent developments in automotive technology have resulted from the need to improve fuel economy without sacrificing passenger comfort or safety. This paper documents an effort to reduce the weight of dual-use military/civilian vehicles through the use of innovative design architectures. Specifically, a number of crossmember architecture concepts were developed for the cab floorpan of a light-duty truck. The floorpan is a key structural component of any vehicle, providing a significant contribution to noise, vibration, and harshness parameters such as stiffness and normal modes. Finite element concept models of the baseline cab and concept cabs are used to show that changes in the crossmember architecture can significantly reduce cab weight without compromising structural performance.

Springback study on a Dodge Ram fender outer panel is detailed in this paper. A simple measurement fixture is designed for the panel, wherein non-contact laser scan technology is applied The measurement data are compared with the original CAD design surface and deviation contour maps are obtained. Consistency of measurement is studied at different sections among three samples. Details of FEA simulations are outlined. The comparison between measurement and simulation prediction is summarized. A method to describe the consistency of measurement and the accuracy of simulation prediction is proposed. The targets for measurement consistency and simulation accuracy are verified. A sensitivity analysis is also performed to investigate various simulation input parameters.

In most aspects of mechanical design related to a motor vehicle there are two ways to treat dynamic fatigue problems. These are the time domain and the frequency domain approaches. Time domain approaches are the most common and most widely used especially in the automotive industries and accordingly it is the method of choice for the fatigue calculation of welded structures. In previous papers the frequency approach has been successful applied showing a good correlation with the life and damage estimated using a time based approach; in this paper the same comparative process has been applied but now extended specifically to welded structures. Both the frequency domain approach and time domain approach are used for numerically predicting the fatigue life of the seam welds of a thin sheet powertrain installation bracketry of a commercial truck submitted to variable amplitude loading. Predicted results are then compared with bench tests results, and their accuracy are rated.

NVH (Noise Vibration & Harshness) is one of the main focus areas during the development of products such as passenger cars or trucks. Physical test methods have traditionally been used to assess NVH, but the necessity for reducing cost and creating a robust solution early in the design process has driven the increased usage of simulation tools. Development of well-defined methods and tools for NVH analysis allows today’s OEMs to have a virtual engineering based development cycle from concept to test. However, a subset of NVH problems including squeak and rattle (S&R) have not been generally focused upon. In a vehicle, S&R is a recurring problem for interior plastic parts such as an instrument panel or door trim. Since 2012, Altair has been developing S&R Director (SnRD), which is a solution that identifies and combats S&R issues by embedding the Evaluation-Line (E-Line) methodology [1] [2].

The current advanced airbag regulation (FMVSS208) requires passenger cars and MPV either to have an automatic suppression system or to meet the LRD requirement on the passenger side. Recently, the car makers are choosing LRD requirement option and developing new LRD passenger airbag system. This paper presents a new methodology for improvement of airbag deployment using experimental and analytical research. The significant parameters were determined from statistical analysis of the experiment data. Basically, to deploy airbag normally, the ultra sonic knife or laser is used to cut the skin layer inside along with the gate line partially, so that deploying airbag can tear gate on instrument panel surface easily. As a result of the number of tests conducted at different conditions, this study was able to determine the range of relevant parameters.

In 2016 the United States Automotive Materials Partnership (USAMP) approached several software vendors with the desire to establish the current state-of-the-art of explicit finite element software for predicting the crash behavior of composite laminates as it relates to application in the automotive industry. The nonlinear explicit solver, RADIOSS, was included in the investigation. Coupon and generic component level test data were supplied to help with the development of material models. The innovation of the approach taken with RADIOSS was to use a numerical Design of Experiments (DOE) to simultaneously fit the various modes of material damage and failure for the composite material. Final correlation was to a series of sled tests completed on a composite bumper and crush cans.

Correct kinematics and compliance modeling of a MacPherson strut suspension requires including the physics of strut rod bending. Various approaches to modeling this bending are available, but these require extensive testing or iteration to achieve reasonable results. This paper presents a new method of modeling strut bending that relies only on easily measured physical characteristics, and yet maintains a high degree of accuracy.

The authors are responsible for the development of a structural 3D shell based bead-to-bead model with sidewalls and belt that separately models all functional layers of a modern tire [4]. In this model, the inflation pressure is modeled as a uniform stress acting normal to the shell’s inner face. The pressure can vary depending on the application: prescribed by the MBS-tool to align to a constant pressure specified for a vehicle or scenario, but it can also be modified dynamically to simulate e.g. a sudden pressure loss in a tire [1]. For many applications, this description of the inflation pressure as a time dependent quantity is sufficient. However, there are applications where it is needed to describe the inflation gas using a dynamic gas equation (Euler or Navier-Stokes). One such example is when the tire model is used in NVH (Noise-Vibration-Harshness) applications where the frequency range extends the 200 Hz range.

Truck frame structural performance of body on frame vehicles is greatly affected by crossmember and joint design. While the structural characteristics of these joints vary widely, there is no known tool currently in use that quickly predicts joint stiffness early in the design cycle. This paper will describe a process used to evaluate the structural stiffness of frame joints based on research of existing procedures and implementation of newly developed methods. Results of five different joint tests selected from current production body-on-frame vehicles will be reported. Correlation between finite element analysis and test results will be shown. Three samples of each joint were tested and the sample variation will be shown. After physical and analytical testing was completed, a Design of Experiments approach was implemented to evaluate the sensitivity of joints with respect to gauge and shape modification.

Weight is a major factor during the development of Automotive Powertrains due to stringent fuel economy requirements. Light weighting constitutes a challenge to the engineering community when trying to deliver quieter powertrains. For this reason, the NVH (Noise Vibration Harshness) CAE engineers are adopting advanced vibro-acoustic simulation methods combined with topology optimization methods to drive the design of the under hood components for Noise Vibration and Harshness. Vibro-acoustic computational methods can be complex and require significant computation effort. Computation of Equivalent Radiated Power (referred to as ERP) is a simplified method to assess maximum dynamic radiation of components for specific excitations in frequency response analysis which in turn affects radiated sound. Topology Optimization is a mathematical technique used to find the best material distribution for structural systems in order to deliver a specific objective under clearly defined constraints.

The recent growth of available computational resources has enabled the automotive industry to utilize unsteady Computational Fluid Dynamics (CFD) for their product development on a regular basis. Over the past years, it has been confirmed that unsteady CFD can accurately simulate the transient flow field around complex geometries. Concerning the aerodynamic properties of road vehicles, the detailed analysis of the transient flow field can help to improve the driving stability. Until now, however, there haven’t been many investigations that successfully identified a specific transient phenomenon from a simulated flow field corresponding to driving stability. This is because the unsteady flow field around a vehicle consists of various time and length scales and is therefore too complex to be analyzed with the same strategies as for steady state results.

Today, vehicle architectures are changing continuously due to the need for increasing vehicle electrification. Electric motors have helped sustain this requirement. Traditional internal combustion engines are being replaced or coupled with traction motors or in-wheel motor systems in full-electric or hybrid-electric vehicles. With the use of electric motor in a vehicle, the number of parts can be reduced. This leads to reduced packaging size and complexity. Also, CO2 emissions are reduced, and overall efficiency is increased. But the task of designing an electric motor which is assembled in a vehicle could be quite complex. The design of an electric motor can affect the durability, and noise and vibration characteristic of the vehicle structure to which it is connected. The design of the vehicle structure to which the motor attaches should be able to sustain the magnetic torque generated by the motor.

In this work, the multi-disciplinary problem arising from fluid sloshing within a partially filled tanker truck undergoing lateral acceleration is investigated through the use of multiphysics coupling between a computational fluid dynamics (CFD) solver and a multi-body dynamics (MBD) solver. This application represents a challenging test case for simulation technology within the design of commercial vehicles and is intended to demonstrate a novel approach in the field of computer aided engineering. Computer aided engineering is playing a more predominant role in the design process for commercial and passenger vehicles. Better understanding of the real time loading and responses on a vehicle during intended or unintended use can result in improved design and reduced cost over traditional designs that relied heavily on assumed loads.

To evaluate the performance of Body-in-white design different attributes needs to be evaluated at various design levels. The current paper focus on evaluation and improvement of Body in white structure in detailed design stage of product development by identifying common performance contributors with multiple model inputs and design validation plans to achieve global performance of the structure. This paper explains the methodology to evaluate the results of Initial Analysis and design iterations for multiple Design verification plans individually and also combined. Sensitivity study is carried out by Multi model DOE (Design of experiments) optimization method to identify the global performance effecting contributors for each design validation plan. The methodology could generate a design which improve stiffness on local joinery sections and also global structural stiffness parameters in both static and dynamic condition by keeping the overall mass in acceptable range.

The idea of employing an infinite element to solve acoustic problems in an unbounded domain has demonstrated significant promise. Starting from first principles, the detailed element formulation for a mapped wave-envelope infinite element is presented. This, in conjunction with an efficient search algorithm to map receiver grid locations to the pertinent infinite element on the boundary, is used to enhance an established finite-element based vibro-acoustic solver for frequency response in order to solve large scale industrial problems. The solver is then subjected to a thorough validation and verification study using problems whose solutions are established either through classical texts or alternative approaches to demonstrate the accuracy, robustness and efficiency of the current solution.