Search Results

This study examined a method of predicting the piston temperature in reciprocating internal combustion engines with the aim of developing lightweight pistons. Since the piston temperature is strongly affected by the in-cylinder temperature distribution and turbulence, it is necessary to consider the effects of flame propagation, cooling by the intake air, temperature rise due to combustion, in-cylinder flow and the combustion chamber shape. A three-dimensional combustion simulation that can take these effects into consideration was run to calculate the heat transfer coefficient from the piston crown surface and the gas temperature. The results were used as the boundary conditions for an analysis of heat transfer from the piston, and a method was thus developed for analyzing the piston temperature.

A new variable valve actuation system that varies valve lift and timing events continuously has been devised and confirmed to substantially improve power and reduce fuel consumption when applied to a SI engine. The variable valve event and lift (VEL) system is a simple mechanism consisting of oscillating cams and linkages, enabling it to operate the valves smoothly even at high speed. Its compact size facilitates application to direct-acting valve trains and its ability to vary valve lift from a deactivated state (0) to a large lift amount allows the system to be used with a wide range of engine concepts. In this study, VEL was combined with a phase shifting function to enable the valve lift characteristic to be varied virtually arbitrarily, and test results showed that fuel consumption of a SI engine was reduced by nearly 10%.

This paper presents a variable compression ratio (VCR) system that has a new piston-crankshaft mechanism with multiple links. This multi-link mechanism varies the piston position at top dead center (TDC), making it possible to change the compression ratio of the engine continuously. Previous attempts have been made to achieve variable compression ratio with this type of method, but it was difficult to avoid various undesirable effects such as an increase in the engine size, substantial weight increases, increased engine block vibration due to a worsening of piston acceleration characteristics and increased friction resulting from a larger number of sliding parts. At the stage of developing the basic design of the multi-link geometry, emphasis was placed on selection of a suitable link geometry and optimization of the detailed dimensions with the aim of essentially resolving these previous issues.

A continuously variable valve event and lift (VEL) system, actuated by oscillating cams, can provide optimum lift and event angles matching the engine operating conditions, thereby improving fuel economy, exhaust emission performance and power output. The VEL system allows small lift and event angles even in the engine operating region where the required intake air volume is small and the influence of valvetrain friction is substantial, such as during idling. Therefore, the system can reduce friction to lower levels than conventional valvetrains, which works to improve fuel economy. On the other hand, a distinct feature of oscillating cams is that their sliding velocity is zero at the time of peak lift, which differs from the behavior of conventional rotating cams. For that reason, it is assumed that the friction and lubrication characteristics of oscillating cams may differ from those of conventional cams.

A new variable valve event and lift (VVEL) system has been developed by applying a multiple-link mechanism. This VVEL system can continuously vary the valve event angle and lift over a wide range from an exceptional small event angle and small lift and to a large event angle and large lift. This capability offers the potential to improve fuel economy, power output, emissions and other parameters of engine performance. The valve lift characteristics obtained with the VVEL system consist of a synthesis of the oscillatory motion characteristics of the multiple-link mechanism and the oscillating cam profile. With the multiple-link mechanism, the angular velocity of the oscillating cams varies during valve lift, but the valve lift characteristics incorporate both gentle ramp sections and sharp lift sections, the same as a conventional engine.