Search Results

Hydrogen is normally produced through the steam reforming of fossil fuels, notably natural gas or their partial oxidation in oxygenated air. The products of these processes would normally produce the H2 in the presence of a variety of concentrations of CO, CO2, H2O and N2. There is increasing interest in employing such mixtures whether on their own or in mixtures with traditional liquid or gaseous fuels in S.I. engine applications so as to improve the combustion process and engine performance. The combustion characteristics in S.I. engines of gas mixtures that contain H2 and CO need to be established to provide key operational information, such as the variations in the combustion duration and the knock limits. This paper presents experimental data obtained in a single cylinder, variable compression ratio, S.I., CFR engine when operated in turn on CH4, H2, CO and their binary mixtures.

A model is described for the prediction of the onset of autoignition and knock in compression ignition engines of the dual fuel type. The associated variations with time of performance parameters such as the energy release rate, cylinder pressure and charge temperature, power output and species concentrations can also be obtained. This is achieved through modelling in detail the chemical reaction rates of the gaseous fuel during compression and subsequently during diesel fuel pilot ignition and combustion. A comprehensive reaction scheme involving 105 reaction steps with 31 chemical species is employed for the purpose. The results are based mainly on methane or propane as the gaseous fuel while accounting for the contribution of pilot diesel fuel injection. Calculated data showed good general agreement with the corresponding experimental values.

The present contribution describes an analytical approach for predicting the highest limit for acceptable power or efficiency for any spark ignition engine while ensuring knock free operation. A deterministic gradient based model combined with a simple genetic algorithm were used in association with a two-zone engine combustion model to predict analytically the necessary changes in specified operating parameters to produce optimum performance. Various examples involving mainly spark ignition engine operation with methane-hydrogen fuel mixtures are presented and discussed.

The present contribution combines the consideration of the chemical reaction activity of the end gas and engine operating conditions to predict the onset of knock and associated performance in a spark ignition engine fuelled with methane. A two-zone predictive combustion model was developed based on an estimate of the effective duration of the combustion period and the mass burning rate for any set of operating conditions. The unburned end gas preignition chemical reaction activity is described by a detailed chemical reaction kinetic scheme for methane and air. The variation with time of the value of a formulated dimensionless knock parameter based on the value of the cumulative energy released due to preignition reaction activity of the end gas per unit volume relative to the total energy release per unit cylinder swept volume is calculated It is shown that whenever knocking is encountered, the value of builds up to a sufficiently high value that exceeds a critical value.

A two-zone predictive model for the performance of a spark ignited gas engine is described. In this model, an effective mass burning rate and energy release pattern based on an estimate of the combustion duration are developed. For any given engine and set of operating conditions the pressure-time and temperatures-time histories, and hence performance parameters such as indicated power output, peak pressure, optimum spark timing, etc. are predicted. Through monitoring the chemical reaction activity, while employing detailed chemical kinetics of the end gas within the unburnt zone, the incidence of autoignition and knock can also be predicted. A dimensionless knock criterion that compares the specific energy release due to end gas preignition reaction activity to the specific energy release due to combustion of the fuel is developed and used to test for the incidence of knock and its severity.

The effects of residual gases on the combustion process of engines are examined through analysing the cyclic variations of autoignition in a motored engine fuelled with homogeneous gaseous fuel-air mixtures. The changes in composition and temperature of residual gases as well as the associated rates of the preignition reactions are followed over a number of consecutive working cycles at a constant engine speed to establish whether autoignition will take place and how many cycles are need for its occurrence. It is in that the residual gases associated with partial oxidation reactions tend to have strong kinetic but hardly any thermal or diluting effects, while residual gases produced from the more complete combustion following autoignition tend to possess significant thermal, kinetic and diluting effects.

Dual fuel engines compress the air/gas fuel mixture to just below autoignition conditions and then ignite it by the injection of a small amount of liquid fuel. The use and performance of these engines, however, have been limited by knock. Single cylinder engine experiments show that this limitation is a readily defined autoignition phenomenon, and can be analyzed by a mathematical model that indicates the effects on performance imposed by fuel changes and operating conditions. Experimental findings confirm that these performance data correlate broadly with those obtained conventionally in standard spark ignited or motored engines.

An examination of the engine performance and associated combustion is made for a dual fuel engine of the compression ignition type when additional auxiliary fuels were introduced in turn in the form of a spray into the main intake charge with methane being the main fuel. This was attempted with the view of modifying the dual fuel engine behaviour particularly at light load. Alcohols, gasoline, benzene or normal hexane were introduced in turn to various extents into the intake charge of the engine. Comparison with dual fuel operation on a range of gaseous fuels and with water spray injection was made. It is shown that gasoline, benzene or n-hexane intake addition reduced the overall ignition delay significantly and increased the power output of the dual fuel diesel engine at light load. This, however, was achieved at the cost of undermining the efficiency of fuel utilization at higher loads.

The total number of vehicles fuelled with compressed natural gas, CNG, is relatively very small in comparison to gasoline fuelled vehicles. Accordingly, because of the lack of statistics of accidents involving CNG fuelled vehicles, their safety aspects are evaluated in comparison to automobiles fuelled with gasoline or some other alternative fuels such as propane, hydrogen, LNG or LH2. It is suggested that methane, CNG, has some excellent physical, chemical and combustion characteristics that make it a safe automotive fuel. These characteristics are reviewed and the superior relative safety of methane in automotive applications in comparison to applications involving the other fuels is demonstrated where well designed conversion systems and operations are employed.

A predictive procedure for establishing the performance parameters of spark ignition engines fueled with a range of gaseous fuels and their mixtures is described. The incidence of knock and its relative intensity are also accounted for. The two-zone model incorporates a procedure for deriving an estimate of the effective duration of combustion and the associated mass burning rate for various operating conditions and gaseous fuels. The preignition chemical reaction activity of the unburned end gas zone and its consequences on cylinder pressure development is evaluated while using detailed chemical kinetics. The onset of autoignition and knock is established via a parameter that monitors the incremental pressure increase solely due to the preignition reaction activity per unit of mean effective combustion pressure.