Search Results

Article

FADA-CATEC uses 3D printing to slim down the CHEOPS satellite

2018-12-06

The Center for Advanced Aerospace Technologies (FADA-CATEC) has collaborated with the Spanish engineering company CiTD in the design, development, and manufacture of new aerospace components through 3D printing for the European Space Agency CHEOPS satellite.

Article

Made In Space is set to make in space

2019-07-17

Once in orbit, Archinaut One will use additive manufacturing techniques – or 3D printing – to create two 32-foot beams extending out from each side of the spacecraft. As manufacturing progresses, each beam will unfurl two solar arrays that generate up to five times more power than traditional solar panels on spacecraft of similar size.

Article

Pratt & Miller Engineering joins Raytheon, Rheinmetall team for U.S. Army combat vehicle competition

2019-08-26

Pratt & Miller’s main role will be ensuring that the Lynx meets or exceeds the Army's survivability requirements for the OMFV, which is scheduled to begin replacing the M-2 Bradley Fighting Vehicle in 2026. The OMFV competition requires that the vehicle be optimized for dense urban areas while maintaining efficacy against threats in open, rural areas.

Article

Canada’s Highway 407 ETR tests high contrast AV highway markings

2019-07-29

407 Express Toll Route Concession Company Limited is optimizing kilometers of Canadian highway for automated vehicles (AVs) in partnership with 3M Canada. 407 ERT has applied high-contrast 3M pavement marking tapes for Advanced Driver Assistance Systems (ADAS) on lanes on Canada’s Highway 407 ETR.

Article

Canada will establish a cross-country electric vehicle charging network

2019-07-12

The government of Canada is investing $4.6 million in Petro-Canada, a division of Suncor Energy, for building 92 electric vehicle (EV) fast charging stations in its coast-to-coast network.

Article

Scope Technology partners with Microsoft to advance connected car solutions

2019-07-18

Scope Technology has migrated its advanced enterprise solutions to Microsoft Azure, significantly enhance the adoption of innovations in its connected car solutions.

Article

Virtual factories accelerate collaboration, advance technologies

2019-08-26

The Commonwealth Center for Advanced Manufacturing (CCAM), a non-profit consortium based in Prince George County, Virginia, uses a 3D visualization lab to expand beyond the walls of its 62,000-square-foot brick and mortar facility and deliver a collaborative development for researchers in industry, academia, and government.

Article

Velodyne and the Center for Automotive Research latest to the International Alliance for Mobility Testing & Standardization (IAMTS)

2019-08-15

The Center for Automotive Research (CAR) and Velodyne Lidar, Inc. have joined the International Alliance for Mobility Testing & Standardization (IAMTS). Alongside SAE International, the two organizations will serve as as core members of IAMT’s Technical Leadership Committee.

Article

Peloton develops a Level 4 automated platooning system, but keeps the driver in charge

2019-07-19

The company, which specializes in connected and automated vehicle technology in the freight industry, plans on doubling shipping productivity by having human drivers lead a platoon of automated vehicles using SAE International Level 4 “Automated Following” technology.

Article

Bell incorporates bird-deterring lights as standard equipment on Bell 407 helicopters

2019-08-05

Helicopter manufacturer and Textron Inc. subsidiary, Bell Flight, is adding a new piece of standard equipment to its Bell 407GXi single-engine, civil utility helicopter program: bird-deterring, pulsing lights.

Article

With new partnerships, OTSL builds out 3D real-time sensor simulator framework for self-driving cars

2019-07-16

With COSMOsim, OTSL is looking to better virtually recreate diverse driving conditions to enable safe and accurate verifications at a point when autonomous driving continues to move toward practical use around the world.

Article

New Boeing facility will improve V-22 quality, safety

2019-08-06

Outside of Philadelphia, a 350,000-square-foot facility has been transformed into a modern factory where the Boeing Company will build fuselages for the Bell Boeing V-22 Osprey aircraft. The updated plant will also modernize current MV-22 aircraft for the U.S. Marine Corps fleet.

Article

Look behind-the-scenes at Acura’s Performance Manufacturing Center, home of the Acura NSX

2019-07-31

Acura’s latest video gives a look into what it takes to manufacture the second generation Acura NSX hybrid supercar at its Performance Manufacturing Center (PMC) in Marysville, Ohio.

Article

Embraer’s new Praetor 500 is awarded Type Certification in São Paulo during LABACE

2019-08-15

Embraer S.A.’s new Praetor 500 midsize business jet was awarded Type Certification from Brazil's National Civil Aviation Authority (Agência Nacional de Aviação Civil, or ANAC). The Praetor 500 surpassed its certification goals and outperformed class competitors – achieving an intercontinental range of 3,340 nautical miles (6,186 kilometers) with four passengers and keeping with NBAA IFR Reserves, a high-speed cruise of 466 knots true airspeed (KTAS).

Article

Shanghai’s Human Horizons unveils a 5G-V2X-enabled electric, luxury SUV

2019-08-06

Human Horizons of Shanghai, China has debuted a premium all-electric smart brand, HiPhi, with a production-ready prototype vehicle, HiPhi 1 – a premium supercar-inspired electric SUV and the first production vehicle equipped with 5G-V2X, or Vehicle-to-Everything connectivity.

Article

Honeywell acquires TruTrak and expands general aviation avionics portfolio

2019-07-26

As part of the acquisition, BendixKing will continue to drive the successful adoption of TruTrak's autopilots in the experimental and certified aircraft markets, keeping TruTrak's engineers and CEO, Andrew Barker, to maintain the brand’s integrity and the affordability.

Article

NASA's Orion Spacecraft is complete, assembled, and ready for integration ahead of final testing

2019-07-23

Technicians and engineers from Lockheed Martin, NASA, and supporting contractors meticulously assembled the capsule into its finished state, including installing the capsule's avionic computers, harnesses, propulsion system and its 12 engines, 11 parachutes, its large 16-foot-diameter heat shield, and forward bay cover.

Article

ULA’s Vulcan Centaur will launch Sierra Nevada Corporation’s Dream Chaser spaceplane

2019-08-20

United Launch Alliance (ULA) will supply launch vehicles for the Dream Chaser Cargo System. Starting in 2021, Dream Chaser – Sierra Nevada Corporation (SNC) Space Systems’ reusable spaceplane – will launch aboard ULA's Vulcan Centaur rockets for six NASA cargo resupply and return services to the International Space Station (ISS).

Article

Space launch providers submit proposals for National Security Space Launch program

2019-08-16

Four companies – Blue Origin, Northrop Grumman Innovation Systems, SpaceX, and United Launch Alliance (ULA) – recently submitted proposals for the U.S. Air Force's Phase 2 Launch Services Procurement (LSP) competition. Two of those companies will be awarded with up to 34 launches over a five-year period under the National Security Space Launch (NSSL) program.

Article

Dragonfly will be NASA’s next solar system explorer

2019-06-28

Dragonfly, which might be called a rotorcraft lander, is under development by the Johns Hopkins University Applied Physics Laboratory and has the appearance of an Earth-bound vertical take-off and landing (VTOL) unmanned aircraft system (UAS) or drone.