Search Results

Abstract The use of nanomaterials and nanostructures have been revolutionizing the advancements of science and technology in various engineering and medical fields. As an example, Carbon Nanotubes (CNTs) have been extensively used for the improvement of mechanical, thermal, electrical, magnetic, and deteriorative properties of traditional composite materials for applications in high-performance structures. The exceptional materials properties of CNTs (i.e., mechanical, magnetic, thermal, and electrical) have introduced them as promising candidates for reinforcement of traditional composites. Most structural configurations of CNTs provide superior material properties; however, their geometrical shapes can deliver different features and characteristics. As one of the unique geometrical configurations, helical CNTs have a great potential for improvement of mechanical, thermal, and electrical properties of polymeric resin composites.

Abstract A key problem of the construction of fully electric aircraft is the limited energy density of battery packs. It is generally accepted that this can only be overcome via new, denser battery chemistry together with a further increase in the efficiency of power utilization. One appealing approach for achieving the latter is using laser-assisted filler-based joining technologies, which offers unprecedented flexibility for achieving battery cell connections with the least possible electrical loss. This contribution presents our results on the effect of various experimental and process parameters on the electrical and mechanical properties of the laser-formed bond.

This specification covers one type of high-contrast, medium-grain radiographic film in the form of cut sheets or rolls.

This specification covers one type of high-contrast, medium-grain radiographic film in the form of cut sheets or rolls.

This specification covers one type of high-contrast, medium-grain radiographic film in the form of cut sheets or rolls.

This specification covers one type of high-contrast, medium-grain radiographic film in the form of cut sheets or rolls.

The Soft X-Ray Telescope (SXT) is an instrument on the International X-Ray Observatory (IXO). Its flight mirror assembly (FMA) has a single mirror configuration that includes a 3.3 m diameter and 0.93 m tall mirror assembly. It consists of 24 outer modules, 24 middle modules and 12 inner modules. Each module includes more than 200 mirror segments. There are a total of nearly 14, 000 mirror segments. The operating temperature requirement of the SXT FMA is 20°C. The spatial temperature gradient requirement between the FMA modules is ±1°C or smaller. The spatial temperature gradient requirement within a module is ±0.5°C. This paper presents thermal design considerations to meet these stringent thermal requirements.

Requirements analysis for aircraft simulators is often driven by photographs and videos of the actual aircraft. An engineer may gather and organize hundreds or even thousands of source photos of various instruments and devices unique to the aircraft. Managing all of this source information and referencing it to generate software requirements can be challenging and time-consuming. This paper explores Content Based Image Retrieval (CBIR) techniques to automatically process and search those images to generate basic requirements and to facilitate reuse. An unsupervised clustering algorithm groups source images based on minimal user input. Images processed in this way can also be queried by image similarity, thereby allowing project managers to find common source material among projects. The effectiveness of these techniques is demonstrated on an example cockpit.

An infrared laser absorption technique has been developed to measure in-cylinder concentrations of CO in an optical, automotive HCCI engine. The diagnostic employs a distributed-feedback, tunable diode laser selected to emit light at the R15 line of the first overtone of CO near 2.3 μm. The collimated laser beam makes multiple passes through the cylinder to increase its path length and its sampling volume. High-frequency modulation of the laser output (wavelength modulation spectroscopy) further enhances the signal-to-noise ratio and detection limits of CO. The diagnostic has been tested in the motored and fired engine, exhibiting better than 200-ppm sensitivity for 50-cycle ensemble-average values of CO concentration with 1-ms time resolution. Fired results demonstrate the ability of the diagnostic to quantify CO production during negative valve overlap (NVO) for a range of fueling conditions.

MIL-STD-704 defines power quality in terms of transient, steady-state, and frequency-domain metrics that are applicable throughout a military aircraft electric power system. Maintaining power quality in more electric aircraft power systems has become more challenging in recent years due to the increase in load dynamics and power levels in addition to stricter requirements of power system characteristics during a variety of operating conditions. Further, power quality is often difficult to assess directly during experiments and aircraft operation or during data post-processing for the integrated electric power system (including sources, distribution, and loads). While MIL-STD-704 provides guidelines for compliance testing of electric load equipment, it does not provide any instruction on how to assess the power quality of power sources or the integrated power system itself, except the fact that power quality must be satisfied throughout all considered operating conditions.

Advanced technologies in LED's have the potential to reduce maintenance and improve aircraft safety. Aircrafts need adequate illumination for night time landing. New technology such as high-power LEDs allow for better suited light distributions, more whitish light compatible for mesopic lighting conditions and reduced glare in adverse weather conditions. LEDs and the associated electronics are more susceptible to harsh environmental conditions and this needs to be accounted for in the design of the equipment. Highly conductive metal core PCBs (MCPCB) allow for adequate cooling in a mirror telescopic optical arrangement when coupled with robust active cooling. Closed loop optical feedback of output flux ensures constant performance over the lifetime of the light unit and allows for indication of remaining useful life to the operator to plan maintenance activities. Parylene coating inhibits premature degradation of the LEDs induced by water vapor and corrosive gases.

Automated countersink measurement methods which require contact with the workpiece are susceptible to a loss of accuracy due to cutting debris and lube build-up. This paper demonstrates a non-contact method for countersink diameter measurement on CFRP which eliminates the need for periodic cleaning. Holes are scanned in process using a laser profilometer. Coordinates for points along the countersink edge are processed with a unique filtering algorithm providing a highly repeatable estimate for major and minor diameter.

In contemporary industries the demand for very accurate robots is continuously growing. Yet, robot vendors are limited in the achievable accuracy of their robots, as they have no means to provide a direct end-effector feedback. Therefore, most approaches aim to identify an accurate model of the robotic system, thus providing compensation factors to correct the deflections. Models, however, are unable to represent the real physical system in a sufficient manner for path correction. The non-linearities in robotic systems are difficult to model and the dynamics cannot be neglected. A better approach is, therefore, to use direct end-effector position and orientation feedback from an external sensor as, e.g. a Leica laser tracker. The measured data can directly be compared to the nominal data from the path interpolator. Hence, the data are independent of the kinematic robot model.

Aircraft development projects at Bombardier Aerospace involve a large number of tasks executed by a network of professionals from various disciplines. As the complexity of products and the development process increases, it becomes more difficult to manage the interactions among tasks and people. In fact, it may be impossible to even predict the impact of a single design decision across the development process. At Bombardier, investigation has shown that there was a lack of communication between design processes when dealing with aeroelasticity information. This resulted in duplicated design effort, reduced quality, and increased time to complete tasks when small design changes from one task induced delays in other tasks. Processes that deal with aeroelasticity work integrate system inertial, aerodynamics and structural information to make aircraft models and perform analyses. These processes have been creating similar models to perform aeroelasticity analyses.

Numerous pyrotechnic devices have been employed in satellite launch vehicle missions, generally for the separation of structural subsystems such as stage and satellite separation. The detonation of the pyrotechnic devices generates shock waves characterized by high accelerations and vibrations which cause the failure of electronic components. To reduce the possibility of failure, many researchers have attempted to develop various experimental and numerical simulation methods for investigating pyroshock behavior to determine the appropriate placement of sensitive equipment. However, most of those methods have limitations such as low flexibility and high costs in the experimental methods and relatively low efficiency and reliability in the numerical methods. This study proposes a simple experimental method for pyroshock prediction using only laser pulse excitation and in-line filters for composite structure.

The purpose of this work is to evaluate the efficiency of several calibration methods applied to a six-axis industrial (serial) robot. Specifically, the absolute position accuracy of a Fanuc LR Mate 200 iC industrial robot is improved using two calibration models. The first model is purely kinematic, and takes into account all geometric parameters. The second model considers, in addition, five compliance parameters related to the stiffness in joints 2, 3, 4, 5, and 6. For both models, the so-called calibration (or identification) robot configurations are selected based on an observability analysis. For each model, the efficiency of five different observability indices are compared. The parameter identification is based on the forward kinematic approach, where only the residual of the calibration positions is minimized.