Search Results

TWBs (tailored welded blanks) technology can open new avenues for obtaining components in the automotive, aerospace and electronics industries. Friction stir process (FSP) can control the properties by deep localized plastic deformation using the non-consumable tool. In this study, the primary objective is to investigate the effects of Graphene nanoparticles (GNPs) in AA7075 material and the effect of FSP graphene NPs on the forming limit curve of the TWBs through experiments. The micrographs of the weldment are obtained by metallography practices. Tensile specimens are separated for evaluating FSP weld zones. Obtained results exhibits the formability limit of AA7075 thin sheets and decrease FSP thin sheets formability as compared with the formability of base metals

Modern automobile applications such as petrol, diesel, and gaseous fuel injection system use dissimilar Inconel 718 (IN718) and Stainless Steel 304 (SS 304) joints. IN 718 is a precipitation-hardened austenitic nickel-based superalloy with exceptional qualities such as high strength, resistance to corrosion, greater toughness, as well as resistance to thermal induced fatigue at elevated temperatures (between 150 and 1500oC), while SS 304 is a T 300 Series austenitic stainless steel alloy that can be used successfully in wide range of applications due to greater resistance to corrosion, good high and low temperature strength and ductility with excellent weld ability and formability. To get a better understanding of the mechanical characteristics of these heterogeneous weldments, these alloy joints were created using laser beam welding, one of the most modern joining techniques for high-strength materials.

The numerous applications and desirable attributes of Monel 400 urge many researchers to undertake multiple systematic evaluation studies for diverse manufacturing operations. Because of their exceptional mechanical qualities and great corrosion resistance, nickel-based alloys, particularly Monel 400, are increasing in popularity in a variety of applications. Because of their tendency for rapid work hardening and low thermal conductivity, these materials are particularly difficult to machine using traditional manufacturing techniques. Advanced material removal methodologies have been applied to eliminate such drawbacks and are regarded as a suitable alternative approach to traditional machining processes. Based on the Electrical Discharge Machining technique, Wire Electrical Discharge Machining was developed, which a sophisticated machining technology is used to machine hard materials with complex forms in any electrically conducting materials.

Aluminium alloys are attracting importance in various engineering industries because of their exceptional characteristics such as strength, resistance to oxidation etc., AA5052 is an alloy that categorized under Al-Mg series, commonly adopted in anti-rust applications, especially for desalination applications because of its good corrosion resistance in seawater at temperatures up to 125°C, low cost, good thermal conductivity, and non-toxicity of its corrosion products. Minimum Quantity Lubrication (MQL) is one of the approaches that are economically affordable and also eco-friendly used in various machining operations. This present exploration details the investigation CNC turning of AA5052 alloy with conventional Tungsten Carbide (WC) tool inserts under MQL conditions. There are two different natural cutting fluids were engaged such as live oil and coconut oil.

In view of the improvements in manufacturing sectors, which are an important component of any economy’s growth, there is a significant need for new and advanced materials, particularly alloy materials need to be analysed and investigated so that new technologies may be effectively utilized. Materials with low weight and high strength, such as aluminium alloys, are recommended for a variety of applications that require both strength and corrosion resistance, such as marine applications and high-temperature applications. Aluminium alloy Al 5052, a nonferrous material with outstanding properties is an Al-Mg alloy with high thermal conductivity and corrosion products that are non-toxic. Minimum Quantity Lubrication (MQL) is a cost-effective and environmentally friendly method of lubrication employed in a variety of machining processes. The investigation of CNC milling of AA5052 alloy with standard Tungsten Carbide (WC) tool inserts with MQL settings are detailed in this paper.

The engine parameters of a diesel engine (using coated and uncoated pistons) operating with alumina additive chlorella vulgaris biodiesel blends were evaluated experimentally. The properties of test fuel samples were investigated using ASTM standards, and the composition of C. Vulgaris biodiesel was also examined using an FTIR report. A diesel engine’s performance and pollution characteristics were studied using different fuel samples such as diesel, CBD20, CBD20ANP with coated and uncoated pistons. The experimental results showed that the coated engine had a higher BTE (1.8-3.2 percent) and a lower BSFC (1.2-3.8 percent) than the uncoated engine. It is also identified that, exhaust emissions like as CO, HC, and smoke opacity have also been moderately reduced with the coated engine, while NOx emissions were slightly increased.

In this investigation, friction stir welding (FSW) was employed for joining HSLA steel plates (5 mm thick) of grade DMR249A in the development of light weight ship structures. This investigation aims to study the effect pre-heating temperature (PHT) on microstructure and mechanical properties of FSWed DMR249A steel-joints. The PHT of W99 tool was varied from 100 to 250°C. The optical microscopy (OM), scanning electron microscopy (SEM), and an elemental analysis of stir zone (SZ) of DMR249A steel-joint was carried out. The tensile properties, hardness and impact toughness of DMR249A steel-joints were evaluated and compared to BM and joints without PHT. Results disclosed that the DMR249A steel-joints made at PHT 100°C exhibited superior tensile properties and impact toughness compared to other joints. It is attributed to the evolution of finer acicular ferritic and upper bainitic microstructure with no debris of tool in SZ.

Low-dimensional materials are essential in optoelectronic, electrical, and contemporary photonics areas because of their specific properties with decreased dimensions. Low-dimensional materials are those with dimensions in the nanoscale range that are between 1 and 100 nm. Halide perovskites of low dimension can be produced inexpensively using solution-processable procedures, unlike usual semiconductor nanomaterials. Since halide perovskite in thin layers may be produced utilizing a variety of solution-based techniques like simple spin coating. It is possible to produce it with a variety of compositions using low-cost, simple, and large-scale procedures. Quantum dots, perovskite nanoplatelets, nanosheets, perovskite nanorods or nanowires, and other low-dimensional perovskites are all examples of such small-dimensional devices that have been created in a range of morphologies (two-dimensional).

The sun has tremendous potential to address the world’s increasing energy needs, but the increased cost of employing lunar power is a considerable hurdle when equated to more conventional energy sources. The low energy density and low conversion efficiency of solar radiation, expensive raw materials, and labor-intensive manufacturing process all contribute to the high cost of a photovoltaic system. In the last ten years, advances in nano science and nanotechnology have opened up new possibilities for the creation of effective solar cells. Designing semiconductor, metal, and polymer nanostructure designs for solar cells has become possible. Understanding the methods involved in the photovoltaic energy conversion like optical and electrical process, has also benefited from theoretical and modelling studies. The high price and insufficient efficiency of current solar cells prevent the widespread usage of solar energy.

In today's world, there is an increasing emphasis on the responsible use of fiber reinforced materials in the automobile applications, construction of buildings, machinery, and appliances as these materials are effectively reused, recycled, or disposed with minimum impact on the environment. As such, it has become mandatory to incorporate sustainable, environmental friendly and green concepts in the development of new materials and processes. The primary objective of this study is to manufacture composites using fibers obtained from Thespesia Lampas plants, which are known for their soft, long fibers that are commonly used in various domestic products. The composites are made by combining these fibers with a general purpose polyisocyanurate resin, and their potential applications in both domestic and commercial products are explored. To evaluate the properties of these composites, tests are conducted for tensile strength, flexure, and water absorption.

Titanium alloys are deemed as one amongst the light weight material most preferably adopted in numerous engineering applications due to its exceptional features such as corrosive resistance and thermal strength. These alloys are predominantly used in components of IC engines such as valves and springs, connecting rods. Especially Ti-Grade 5 adopted in aircraft, automobile parts ski plates and bicycles. The preliminary goal of this present research is to optimize the machining variables for Wire Electrical Discharge Machining (WEDM) of Ti-6Al-4V (Grade 5) to accomplish improved rate of material removal and surface finish. Taguchi’s design and analysis method was chosen for devising and examining the experiments by considering input factors (pulse duration and current). An L9 OA was utilized for experimentation to analyze the various output variables, such as surface finish and material removal rate, using the response analysis of Taguchi.

Precipitation Hardened Stainless Steel (PHSS) is one of the martensitic steels that possess exceptional strength and corrosion resistance. Because of its characteristics, this PHSS is exclusively adopted in numerous engineering uses such as nuclear, chemical and marine industries. Welding is one of the important methods of joining that helps to make weldments with better performance characteristics. Corrosion behaviour is one of the important characteristics that contribute hugely to marine and other corrosion-related environments and also this is the most common problem for most of the manufacturing industries. The goal of this study was to analyze the PHSS weldments’ corrosive behavior and compare it with that of the two commonly used welding processes, namely MIG and TIG. The corrosive properties of the weldments were evaluated using various mediums, such as nitric acid, ferric chloride, and Oxalic acid.

Nickel-based superalloys are most commonly engaged in a numerous engineering use, including the making of food processing equipment, aerospace components, and chemical processing equipment. These materials are often regarded as difficult-to-machine materials in conventional machining approach due to their higher strength and thermal conductivity. Various methods for more effective machining of hard materials such as nickel-based superalloys have been developed. Wire electrical discharge machining is one of them. In this paper, an effect has been taken to develop an adaptive neuro-fuzzy inference system for predicting WEDM performance in the future. To analyse the model’s variable input, the paper employs the Taguchi’s design and analysis techniques. The evolved ANFIS model aims to simulate the process’s various characteristics and predicted values. A comparison of the two was then made, and it was discovered that the predicted values are much closer to the actual outcomes.

Superalloys, also known as nickel alloys, are widely employed in a wide variety of engineering applications, including the creation of parts for the chemical processing industry and appliances for the food processing industry. Their high heat conductivity and strength, among other characteristics, make them challenging to machine using traditional techniques. Instead, cutting-edge techniques are typically created for the milling of such tougher materials. In this study, we use a modern method called wire electrical discharge machining, which is typically used for working with tougher materials. In order to anticipate WEDM variables, this paper aims to create a Grey-based Artificial Neural Network (ANN) Model and Adaptive Neuro Fuzzy Inference System. The paper uses a Taguchi method to investigate the model’s varying inputs. The purpose of this model is to visualize the process’s varying performance characteristics.

Scrap collection from any location is handled with mortal interference in several places and companies which may be extremely harmful or even dangerous to humanity. The demand for robotization has risen rapidly in recent years, owing to cutting-edge technologies that minimize manpower and threat-taking training directly or indirectly. The main objective of the paper is to study, analyze, investigate the main contribution of waste collecting by workers while cleaning in the Mechanical Industry. In order to ensure the safety of the workers during cleaning we had implemented the Automatic Trash Collecting Machine in the industry. For Fabricating the Trash collecting Machine first we had analyzed the problem in the industry and then we had started the free hand sketch of Trash Collecting Machine. Then the design work of Automatic Trash Collecting Machine is done in the modeling software Catia V5. Then the material selection for our model has been done.

Photonic crystals are materials for controlling and manipulating the light flow. Nano photonic devices deal with behavior of the light in the nanomaterial and devices. It works on the interaction of nano devices with light. They are periodic structures with different refractive indices. The wave guides can be constructed will have sharp and low-loss bending enabling high integration density of several orders of magnitude. On silicon surfaces, nano- and microstructures are created to lower reflection and increase light absorption. It can be applied to enhance infrared (IR) bolometer applications based on MEMS. In this work Silicon nanowires photonic crystals are grown and the electric characteristics and frequency characteristics are modeled, simulated and studied using finite element method. Waveguide is created by removing a set of wires making a path for signal flow for the frequency within the band gap.

Wire Electrical Discharge Machining (WEDM) is a variant of the electrical discharge machining (EDM) process, which represents an innovative method for the removal of material from a workpiece. The aforementioned process is frequently employed for the machining of harder materials that possess intricate geometries. Titanium alloys are a class of lightweight materials that find extensive utilization in many technical applications. Titanium Grade-5 is a titanium-based alloy that exhibits enhanced mechanical strength and improved resistance to corrosion. The objective of this exploratory analysis is to establish empirical correlations between the selected input variables, namely ‘Pulse on,’ ‘Pulse off,’ and peak current, and the desired output measures, which are material removal rate and surface roughness. The experimental design employed the Taguchi method to effectively organize the combination of tests by considering input factors.

Monel 400, a type of nickel alloy which is adopted in numerous engineering fields, such as high-temperature devices. Owing to its better strength and thermal diffusion, it can be difficult to machine with conventional methods. In order to avoid the disadvantages of conventional methods, various advanced material removal techniques have been developed. One of these is Wire Electro Discharge Machining (WEDM). This process is an evolution of the electrical discharge method. In the process of WEDM, difficult materials with intricate forms are usually machined. In this study, the performance of this method on Monel 400 has been analyzed. The three independent variables that are considered when it comes to analyzing the performance of this process are the pulse on, the applied current, and the pulse off. The experiments were performed using the design approach of Taguchi, which involves using an L27 orthogonal array.

SS304 is a type of stainless steel that is well-known for its high ductility and resistance to corrosion; as a result, it is typically utilized in a variety of applications, such as the exhaust systems of automobiles and the springs that are used in seatbelts. Because of its qualities, it will eventually be employed in a variety of body parts, including fuel tanks and chassis, among other things. Due to its properties, SS304 is known to be incredibly difficult to machine using conventional methods. Through a wire electrical discharge machining process, it is easier to cut complex materials with high surface finishes. In this study, a study was conducted on the WEDM process parameters of SS304 to optimize its machining process. The study was carried out using the DoE approach, which involved planning the various experiments. The parameters of the process, such as the pulse on time, peak current, and off time, were analyzed to determine their performance.

Magnesium alloy, known for its high strength and lightweight properties, finds widespread utilization in various technical applications. Aerospace applications, such as fuselages and steering columns, are well-suited for their utilization. These materials are frequently employed in automotive components, such as steering wheels and fuel tank lids, due to their notable corrosion resistance. The performance of magnesium alloy components remains unimproved by normal manufacturing methods due to the inherent characteristics of the material. This work introduces a contemporary approach to fabricating complex geometries through the utilization of Wire-Electro Discharge Machining (WEDM). The material utilized in this study was magnesium alloy. The investigation also considered the input parameters associated with the Wire Electrical Discharge Machining (WEDM) process, specifically the pulse duration and peak current.