Standard
Performance of Audible Warning Devices (Horns) for Motorcycles
2022-02-21
WIP
J1192
The requirements of this document apply to all classes of motorcycles as defined in SAE J213.
Search Results
Standard
Performance of Audible Warning Devices (Horns) for Motorcycles
2017-12-20
CURRENT
J1192_201712
The requirements of this document apply to all classes of motorcycles as defined in SAE J213.
Standard
Performance of Audible Warning Devices for Motorcycles
2010-11-05
HISTORICAL
J1192_201011
The requirements of this document apply to all classes of motorcycles as defined in SAE J213.
Standard
MOTORCYCLE SIDE STAND RETRACTION TEST PROCEDURE
1989-06-01
HISTORICAL
J1578_198906
Standard
MOTORCYCLE SIDE STAND RETRACTION TEST PROCEDURE
1997-07-01
HISTORICAL
J1578_199707
This test procedure provides a standard method for evaluating the side stand retraction performance of a side stand/motorcycle combination.
Standard
Motorcycle Side Stand Retraction Test Procedure
2014-10-24
CURRENT
J1578_201410
This test procedure provides a standard method for evaluating the side stand retraction performance of a side stand/motorcycle combination.
Standard
Service Brake System Performance Requirements - Motorcycles and Motor-Driven Cycles
2014-08-26
CURRENT
J109_201408
This SAE Recommended Practice establishes performance requirements for the service brake systems of all classes of motorcycles intended for highway use.
Standard
Motorcycle Side Stand Retraction Performance Requirements
1998-04-01
HISTORICAL
J1579_199804
These requirements define minimum recommended levels of side stand retraction performance of a new side stand/motorcycle combination when tested according to the procedures of SAE J1578.
Standard
Characterizing a Test Surface for Motorcycle Side Stand Retraction Performance Testing
2014-10-24
CURRENT
J1846_201410
This SAE Recommended Practice is intended for use only in characterizing test surfaces used in motorcycle side stand retraction testing (SAE J1578). The equipment and procedure described in this document yields repeatable results in characterizing test surfaces in a way found to be related to retraction performance. The test results obtained with this procedure do not necessarily correlate with measurements obtained with other friction measurement procedures which have been developed for other purposes.
Standard
Characterizing a Test Surface for Motorcycle Side Stand Retraction Performance Testing
1998-06-01
HISTORICAL
J1846_199806
This SAE Recommended Practice is intended for use only in characterizing test surfaces used in motorcycle side stand retraction testing (SAE J1578). The equipment and procedure described in this document yields repeatable results in characterizing test surfaces in a way found to be related to retraction performance. The test results obtained with this procedure do not necessarily correlate with measurements obtained with other friction measurement procedures which have been developed for other purposes.
Standard
Top Speed Test Procedure for Electric Motorcycles
2019-12-17
WIP
J3007
This SAE Recommended Practice incorporates a track-based test procedure that produces a representative value for vehicle top speed when operating on a level paved road with a fully charged battery.
Standard
Top Speed Test Procedure for Electric Motorcycles
2014-02-21
CURRENT
J3007_201402
This SAE Recommended Practice incorporates a track-based test procedure that produces a representative value for vehicle top speed when operating on a level paved road with a fully charged battery.
Standard
MOTORCYCLE STOP LAMP SWITCH
1977-12-01
HISTORICAL
J1167_197712
This SAE Recommended Practice established test procedures and performance requirements for stop lamp switches intended for use on motorcycles.
Standard
MOTORCYCLE STOP LAMP SWITCH
1989-06-01
HISTORICAL
J1167_198906
This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.
Standard
MOTORCYCLE STOP LAMP SWITCH
1984-06-01
HISTORICAL
J1167_198406
This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.
Standard
MOTORCYCLE TURN SIGNAL LAMPS
1983-03-01
HISTORICAL
J131_198303
This Engineering Design Specification provides design parameters and general requirements for motorcycle turn signal lamps. It does not apply to mopeds.
Standard
Motorcycle Turn Signal Lamps
1997-10-01
HISTORICAL
J131_199710
This SAE Standard provides design parameters and general requirements for motorcycle turn signal lamps. It does not apply to mopeds.
Standard
Motorcycle Stop Lamp Switch
2014-01-06
HISTORICAL
J1167_201401
This SAE Recommended Practice defines the test conditions, procedures, and performance specifications for 6- and 12-v stop lamp switches intended for use on motorcycles.
Standard
Motorcycle Stop Lamp Switch
2021-09-15
CURRENT
J1167_202109
This SAE Standard defines the test conditions, procedures, and performance specifications for 6 V and 12 V stop lamp switches intended for use on motorcycles.
Standard
Motorcycle Stop Lamp Switch
2008-05-20
HISTORICAL
J1167_200805
This SAE Recommended Practice defines the test conditions, procedures, and performance specifications for 6- and 12-v stop lamp switches intended for use on motorcycles.
