Refine Your Search

Topic

Author

Affiliation

Search Results

Standard

J826/3 CAD Model of Legs and Back Hardware for SAE J826 3-D H-Point Machine

2014-10-16
WIP
J826/3
This document describes the CAD model data of legs and back hardware available from SAE for the HPM-1 three-dimensional H-point machine. The elements of the CAD model include the feet, lower and thighs as well as headroom probe and t-bar. Also included are datum points and lines, and calibration references. The intended purpose for this information is to provide a CAD reference for design and benchmarking as well as a calibration reference for the physical HPM-1 audits. The content and format of the data files that are available are also described. The actual CAD model files are included with this product and are provided in the following formats: CATIA v4 (without parametrics), CATIA v5 (without parametrics), IGES, and STEP.
Standard

Information Report for Hoists used with an Unoccupied Mobility Device

2010-02-02
WIP
J2930
This SAE Information Report establishes a uniform procedure for assuring the manufactured quality, installed utility and performance of automotive hoists designed to load and unload an unoccupied Mobility Device into or upon a personally licensed vehicle.
Standard

Air Conditioning Service Procedures for Heavy duty and Off-Highway work Machines using R-134a refrigerant

2016-09-12
WIP
J3126
This recommended practice provides technicians with safe and efficient techniques and general equipment recommendations for servicing Mobile Air Conditioning (MAC) systems in heavy duty and off-highway work machines. Presently, R-134a is the only approved refrigerant for use in mobile heavy duty and off-highway equipment and therefore this document primarily covers the servicing of R-134a systems. Since the technician may encounter other refrigerants a brief explanation on the identification safe handling of each refrigerant will be introduced.
Standard

Coiled Tubing Assemblies for Heavy Duty Air Brake Applications

2013-04-30
WIP
J3041
This SAE Standard establishes the minimum performance and endurance requirements for coiled air brake tubing assemblies used for hookup between tractors, trailers and converter dollies. The Standards SAE J844 and SAE J246 along with J1131 must be consulted to determine the complete performance and endurance requirements of individual components of the system. Related TMC Recommended Practices may be consulted for information associated with selection, installation and inspection of these assemblies. This document is intended to set out requirements for the majority of conditions rather than for specialized applications or environments.
Standard

Performance Requirements for Nonmetallic Air Brake System Tubing

2014-08-26
WIP
J2547
This SAE Standard covers the minimum requirements for nonmetallic tubing as manufactured for use in air brake systems which tubing is different from that described in SAE J844. It is not intended to cover tubing for any portion of the system which operates continuously below - 40 degrees C or above +93 degrees C, above a maximum working gage pressure of 1.0 MPa, or in an area subject to attack by battery acid. This tubing is intended for use in the brake system for connections, which maintain a basically fixed relationship between components during vehicle operation. Coiled tube assemblies required for those installations where flexing occurs are covered by this document, SAE J1131 and SAE J2494-3, to the extent of setting minimum requirements on the essentially straight tube and tube fitting connections which are used in the construction of such assemblies.
Standard

Standard Practice for Habitability

2018-08-14
WIP
SAE1007
The Habitability standard practice identifies the recommended approach for conducting Habitability activities in support of system acquisition programs. This standard covers all aspects of the physical environment that people inhabit, for work, or other purpose. It includes adequate space and environmental/temperature controls and, if appropriate, requirements for personnel services (e.g., medical, dental and mess) and living conditions (e.g., berthing and personal hygiene) that have a direct impact on meeting or sustaining system performance/effectiveness or that have such an adverse impact on safety, health, comfort, quality of life and morale that recruitment or retention is degraded. It includes analysis, modeling and simulation, design, and verification of Habitability requirements and processes.
Standard

Design For Maintainer (DFM) Process Standard

2018-08-14
WIP
SAE1009
The Design for Maintainer (DFM) standard identifies the recommended approach for conducting Design for Maintainability activities in support of system acquisition programs. The standard identifies general requirements and processes of a successful DFM program during concept and design development to ensure the lowest possible ownership costs. This standard provides specific detailed contractor requirements for DFM activities inclusive of the Human Engineering domain. The standard is consistent with MIL-STD-46855 and SAE 6906 Human Systems Integration. And DFM standard practices support performance of activities in coordination with other associated disciplines such as maintainability, supportability, and integrated logistics.
Standard

Standard Practice for Force Protection and Survivability (FP&S)

2018-08-14
WIP
SAE1008
The Protection and Survivability (FP&S) standard practice identifies the recommended approach for conducting FP&S activities in support of system acquisition programs. This standard covers FP&S processes throughout system conceptualization, design, development, verification, production, use and disposal. FP&S includes analysis, modeling and simulation, design and verification of system-related survivability characteristics and processes designed to protect personnel from direct threats and accidents, including primary and secondary effects from the events.
Standard

Standard Practice for Personnel

2018-08-14
WIP
SAE1006
The Personnel standard practice identifies the recommended approach for conducting Personnel activities in support of system acquisition programs. This standard covers Personnel processes throughout system conceptualization, design, development, verification, production, use and disposal. Personnel addresses skills, grades, aptitudes, physical attributes and education and training backgrounds of military and civilian personnel required to operate, maintain, train and support the system equipment and associated support equipment and facilities in its operational environment. It includes analysis, modeling and simulation, design support and verification of Personnel estimates and requirements.
Standard

Off-Road Self-Propelled Work Machines Operator enclosure environment Part 4:Heating, ventilating and air conditioning (HVAC) test method and performance

2014-09-16
WIP
J3078/4
J3078/4 specifies a uniform test method for measuring the contribution to operator environmental temperature provided by a heating, ventilating and air conditioning system operating in a specific ambient environment. The method might not determine the complete climatic environment of the operator since this is also affected by heat load from sources other than those on the machine, for example solar heating. J3708/6 is to be used in conjunction with J3078/4 to determine more accurately the complete heat loading on the operator enclosure. Minimum performance levels for the machine’s operator enclosure heating, ventilating and air conditioning systems are established in J3708/4.
Standard

Assessment of Evaluation Method Types to Determine Operational Efficiency of Multi-Vehicle Systems

2017-07-10
WIP
J3147
Scope: This document provides an assessment of rigorous-engineering test and simulation methods that utilize industry accepted data collection and statistical analysis methods to determine the efficiency of multi-vehicle systems comprised primarily of trucks and buses with GVWR of more than 10,000 pounds. The document will provide guidance on the applicability and use of each method discussed.
Standard

Guidelines for Safer On-Road Testing of Prototype Automated Multi-Vehicle Truck and Bus Systems

2017-07-10
WIP
J3149
Scope: This document provides guidelines for safer conduct of on-road tests of multi-vehicle truck and bus systems that may be equipped with prototype automated driving systems comprised primarily of trucks and buses with GVWR of more than 10,000 pounds. The scope is further limited to testing of automated prototype multi-vehicle systems comprised primarily of trucks and buses with GVWR of more than 10,000 pounds on public roads.
Standard

Multi-Vehicle System Operational Efficiency Experimental Test Method

2017-07-10
WIP
J3148
This document describes a rigorous-engineering test procedure that utilizes industry accepted data collection and statistical analysis methods to determine the operational efficiency of multi-vehicle systems comprised primarily of trucks and buses with GVWR of more than 10,000 pounds. The test procedure may be conducted on a test track or on a public road under controlled conditions and supported by extensive data collection and data analysis constraints.
Standard

Taxonomy and Definitions for Automated Multi-Vehicle Truck and Bus Systems

2017-07-10
WIP
J3150
Scope: This document provides a taxonomy and definitions for trucks and buses with GVWR of more than 10,000 pounds with driving automation systems that perform part or all of the dynamic driving task on a sustained basis and that range in level from no driving automation (level 0) to full driving automation (level 5).
Standard

Balance Weight and Rim Flange Design Specifications, Test Procedures, and Performance Recommendations for Heavy Vehicle Applications

2018-04-12
WIP
J3172
This SAE Recommended Practice is intended to serve as a guide for standardization of features, dimensions, and configurations of balance weights for aluminum and steel wheels intended for use on Heavy Truck/Vehicles (Class 5-8) to assure good installation and retention of the balance weight. This document also provides test procedures and minimum performance requirements for testing balance weight retention.
X