Search Results

In view of the improvements in manufacturing sectors, which are an important component of any economy’s growth, there is a significant need for new and advanced materials, particularly alloy materials need to be analysed and investigated so that new technologies may be effectively utilized. Materials with low weight and high strength, such as aluminium alloys, are recommended for a variety of applications that require both strength and corrosion resistance, such as marine applications and high-temperature applications. Aluminium alloy Al 5052, a nonferrous material with outstanding properties is an Al-Mg alloy with high thermal conductivity and corrosion products that are non-toxic. Minimum Quantity Lubrication (MQL) is a cost-effective and environmentally friendly method of lubrication employed in a variety of machining processes. The investigation of CNC milling of AA5052 alloy with standard Tungsten Carbide (WC) tool inserts with MQL settings are detailed in this paper.

The alloy investigated in this research is Precipitation Hardened Stainless Steel (PHSS) 15-5, which provides good corrosion, high strength and hardness. 15-5 Stainless Steel is extensively employed in a variety of applications, including aero plane components, high-pressure corrosive environments that include valves, fasteners, shafts, fittings and gears. In this current exploration, an analysis of the machinability of PHSS is analyzed with textured inserts and the outcomes as compared to conventional inserts. To increase the machinability conditions, two distinct types of textures were produced on the rake face of the tool inserts and employed for this machining procedure utilizing a Wire Electric Discharge Machine (WEDM).The dimensions of the textures were cut on the trial-and-error method. Three different machining parameters with three different levels were chosen. Cutting Speed, feed rate and depth of cut were chosen as the input parameters.

In this investigation, friction stir welding (FSW) was employed for joining HSLA steel plates (5 mm thick) of grade DMR249A in the development of light weight ship structures. This investigation aims to study the effect pre-heating temperature (PHT) on microstructure and mechanical properties of FSWed DMR249A steel-joints. The PHT of W99 tool was varied from 100 to 250°C. The optical microscopy (OM), scanning electron microscopy (SEM), and an elemental analysis of stir zone (SZ) of DMR249A steel-joint was carried out. The tensile properties, hardness and impact toughness of DMR249A steel-joints were evaluated and compared to BM and joints without PHT. Results disclosed that the DMR249A steel-joints made at PHT 100°C exhibited superior tensile properties and impact toughness compared to other joints. It is attributed to the evolution of finer acicular ferritic and upper bainitic microstructure with no debris of tool in SZ.

Due to their various features, aluminum alloy can be used in various applications. These include aerospace, automotive, and electrical and thermal applications. Compared to structural steels, aluminum offers superior corrosion resistance and specific strength. Aluminum alloy known as AA 2014 exhibits various mechanical properties. These include its improved strength and weight ratio. It can also be used in military and aircraft applications. Aluminum alloy is commonly used in various engineering applications, such as the manufacturing of structures and aircraft components. Due to its corrosion resistance, it can be utilized in severe environmental environments. Different methods are used in unconventional ways to generate complicated forms of electrical components. One of these is wire electro-discharge machine (WEDM). This process involves making intricate shapes out of conductive materials.

Precipitation Hardened Stainless Steel (PHSS) is one of the martensitic steels that possess exceptional strength and corrosion resistance. Because of its characteristics, this PHSS is exclusively adopted in numerous engineering uses such as nuclear, chemical and marine industries. Welding is one of the important methods of joining that helps to make weldments with better performance characteristics. Corrosion behaviour is one of the important characteristics that contribute hugely to marine and other corrosion-related environments and also this is the most common problem for most of the manufacturing industries. The goal of this study was to analyze the PHSS weldments’ corrosive behavior and compare it with that of the two commonly used welding processes, namely MIG and TIG. The corrosive properties of the weldments were evaluated using various mediums, such as nitric acid, ferric chloride, and Oxalic acid.

This paper examines the concurrent scheduling of machines and tools with machines in a multi-machine flexible manufacturing system (FMS) with the aim of minimizing the makespan in automobile manufacturing industry. Due to the high cost of tools in FMS, each type of tool has only one duplicate in circulation. To reduce the cost of duplicating tools on each machine, a central tool magazine (CTM) is used to store and share tools among several machines. The main challenge in this scenario is to allocate machines from alternate machines and tools to job operations in a way that minimizes the make span. To address this problem, the article proposes a mixed nonlinear integer programming formulation and a Flower Pollination Algorithm (FPA). The results show that the FPA outperforms existing algorithms and using alternate machines for operations can reduce the make span.

Scrap collection from any location is handled with mortal interference in several places and companies which may be extremely harmful or even dangerous to humanity. The demand for robotization has risen rapidly in recent years, owing to cutting-edge technologies that minimize manpower and threat-taking training directly or indirectly. The main objective of the paper is to study, analyze, investigate the main contribution of waste collecting by workers while cleaning in the Mechanical Industry. In order to ensure the safety of the workers during cleaning we had implemented the Automatic Trash Collecting Machine in the industry. For Fabricating the Trash collecting Machine first we had analyzed the problem in the industry and then we had started the free hand sketch of Trash Collecting Machine. Then the design work of Automatic Trash Collecting Machine is done in the modeling software Catia V5. Then the material selection for our model has been done.

Excellent charge-carrier mobilities and life time of perovskite materials enables it with exceptional light absorption capacity. This provides improved device potential and performance with low-cost commercially feasible technology. The challenges towards handling the perovskite cells are its strength and its environmentally compatible property. Resolving these issues leads perovskite-based technology to hold an innovative potential for quick terawatt-scale solar power distribution. In this line, Organic Photovoltaic is a fast developing PV technology with improved the cell efficiency and life time performance. As organic Photovoltaic cell is available in mulit-colours and can be used to build transparent devices, it finds its application in building-integrated Organic Photovoltaic fair. Optimization of device physics, charge-transport methods, charge-separation procedures, and interfacial effects, would enable the development of stable, more effective device architectures.

This work presents a novel approach for parallel scheduling of machines and tools without tool delay in the automobile manufacturing industry using a symbiotic organisms search algorithm (SOSA). This paper proposes nonlinear mixed integer programming (MIP) formulation to model simultaneous scheduling problems. The mutualistic relationship between different species in nature inspires the proposed algorithm. It aims to optimize the scheduling process by minimizing the makespan (MSN) while ensuring no tool delay during the production process. The algorithm is implemented in a parallel computing environment to speed up the search process and handle scheduling problems. Experimental results show that the proposed approach outperforms existing methods in terms of solution quality and computational efficiency. This work offers a promising solution for real-world manufacturing scheduling problems with multiple machines and tools, often characterized by complex constraints and uncertainties.

Monel 400, a type of nickel alloy which is adopted in numerous engineering fields, such as high-temperature devices. Owing to its better strength and thermal diffusion, it can be difficult to machine with conventional methods. In order to avoid the disadvantages of conventional methods, various advanced material removal techniques have been developed. One of these is Wire Electro Discharge Machining (WEDM). This process is an evolution of the electrical discharge method. In the process of WEDM, difficult materials with intricate forms are usually machined. In this study, the performance of this method on Monel 400 has been analyzed. The three independent variables that are considered when it comes to analyzing the performance of this process are the pulse on, the applied current, and the pulse off. The experiments were performed using the design approach of Taguchi, which involves using an L27 orthogonal array.

SS304 is a type of stainless steel that is well-known for its high ductility and resistance to corrosion; as a result, it is typically utilized in a variety of applications, such as the exhaust systems of automobiles and the springs that are used in seatbelts. Because of its qualities, it will eventually be employed in a variety of body parts, including fuel tanks and chassis, among other things. Due to its properties, SS304 is known to be incredibly difficult to machine using conventional methods. Through a wire electrical discharge machining process, it is easier to cut complex materials with high surface finishes. In this study, a study was conducted on the WEDM process parameters of SS304 to optimize its machining process. The study was carried out using the DoE approach, which involved planning the various experiments. The parameters of the process, such as the pulse on time, peak current, and off time, were analyzed to determine their performance.

To enhance the microstructural and mechanical properties of Reduced Activation and Ferritic-Martensitic (RAFM) steel thermo mechanical treatment (TMT) was performed on as received Normalised and Tempered steel (N+T). The RAFM with 9Cr-1W-0.06Ta major alloying elements steel was used in the study in N+T and TMT conditions. The refinement in microstructure and precipitates was observed in TMT steel in comparison to N+T steel. There is a drastic improvement in mechanical properties such as hardness, tensile properties are observed without losing the ductility. The creep deformation behaviour of thermo-mechanical treated steel and N+T steel were studied at different stress levels at 823 K. The comparative creep rupture and strain properties were studied, and various creep deformation regimes were also analysed for both the conditions of steel.