Search Results

This paper describes an effective integrated method for estimation of subject-specific mass, inertia tensor, and center of mass of individual body segments of a digital avatar for use with physics-based digital human modeling simulation environment. One of the main goals of digital human modeling and simulation environments is that a user should be able to change the avatar (from male to female to a child) at any given time. The user should also be able to change the various link dimensions, like lengths of upper and lower arms, lengths of upper and lower legs, etc. These customizations in digital avatar's geometry change the kinematic and dynamic properties of various segments of its body. Hence, the mass and center of mass/inertia data of the segments must be updated before simulating physics-based realistic motions. Most of the current methods use mass and inertia properties calculated from a set of regression equations based on average of some population.

A summary is given of the enabling technologies for real time high fidelity vehicle dynamics simulation. Methods of utilizing this technology to increase realism in an operator in the loop simulation are then discussed. Finally some of the research that can be performed using a high fidelity, highly realistic operator in the loop simulator is presented. Automotive engineers have long used sophisticated, batch job computer simulations of the dynamics of vehicles and vehicle subsystems to aid them in improving vehicle performance and safety. Recent technological advances have brought high-fidelity vehicle dynamics simulation into a new realm; that of real time.

A method to simulate digital human running using an optimization-based approach is presented. The digital human is considered as a mechanical system that includes link lengths, mass moments of inertia, joint torques, and external forces. The problem is formulated as an optimization problem to determine the joint angle profiles. The kinematics analysis of the model is carried out using the Denavit-Hartenberg method. The B-spline approximation is used for discretization of the joint angle profiles, and the recursive formulation is used for the dynamic equilibrium analysis. The equations of motion thus obtained are treated as equality constraints in the optimization process. With this formulation, a method for the integration of constrained equations of motion is not required. This is a unique feature of the present formulation and has advantages for the numerical solution process.

Our previous formulation for optimization-based dynamic motion simulation of a serial-link human upper body (from waist to right hand) is extended to predict the motion of a tree-structured human model that includes the torso, right arm, and left arm, with various applied external loads. The dynamics of tree-structured systems is formulated and implemented. The equations of motion for the tree structures must be derived carefully when dealing with the connection link. The optimum solution results show realistic dual-arm human motions and the required joint actuator torques. In the second part of this paper, a new method is introduced in which the constraint forces and moments at the joints are calculated along with the motion and muscle-induced actuator torques. A set of fictitious joints are modeled in addition to the real joints.

The Snook tables (Liberty Mutual Tables) are a collection of data sets compiled from studies based on a psychophysical approach to material-handling tasks. These tables are used to determine safe loads for lifting, lowering, carrying pulling, and pushing. The tables take into account different population percentiles, gender, and frequency of activity. However, while using these tables to analyze a work place, Ergonomists often have to select from discrete data points closest to the actual work place parameters thereby reducing accuracy of results. To compound the problem further, multiple interrelated variables are involved, making it difficult to analyze parameters intuitively. For example, it can be difficult to answer questions such as, does reducing the lifting height lower the recommended lifting weight, if the lifting distance is increased? To resolve such issues, this paper presents a new methodology for implementing the Snook tables using multi variable regression.

In this study, an optimization-based approach for simulating the lifting motion of a three dimensional digital human model is presented. Lifting motion is generated by minimizing a performance measure subjected to basic physical and kinematical constraints. Two performance measures are investigated: one is the dynamic effort; the other is the compression and shear forces on the lumbar joint. The lifting strategies are predicted with different performance measures. The joint strength (torque limit) and the compression and shear force on lumbar joint are also addressed in this study to avoid injury during lifting motion.

A framework to validate the predicted motion of a computer human model (Santos) is presented in this work. The proposed validation framework is a task-based methodology. It depends on the comparison of selected motion determinants and joint angles that play major roles in the task, using qualitative and quantitative statistical techniques. In the present work, the validation of Santos walking will be presented. Fortunately, the determinants for normal walking are well defined in the literature and can be represented by (i) hip flexion/extension, (ii) knee flexion/extension, (iii) ankle plantar/dorsiflexion, (iv) pelvic tilt, (v) pelvic rotation, and (vi) lateral pelvic displacement. While Santos is an ongoing research project, the results have shown significant qualitative agreements between the walking determinants of Santos and the walking determinants of four normal subjects.

The human shoulder plays an important role in human posture and motion, especially in scenarios in which humans need achieve tasks with external loads. The shoulder complex model is critical in digital human modeling and simulation because a fidelity model is the basis for realistic posture and motion predictions for digital humans. The complexity of the shoulder mechanism makes it difficult to model a shoulder complex realistically. Although many researchers have attempted to model the human shoulder complex, there has not been a survey of these models and their benefits and limitations. This paper attempts to review various biomechanical models proposed and summarize the pros and cons. It focuses mainly on the human modeling domain, although some of these models were originally from the robotics field. The models are divided into two major categories: open-loop chain models and closed-loop chain models.

The objective of this research was to determine fatigue behavior of SAE 1045 steel subjected to very high tensile mean stress for unnotched, mildly notched, and sharply notched test specimens, and to determine if common S-Nf and ε-Nf mean stress fatigue life models are applicable. High tensile mean stress fatigue tests for R ratios of 0.8 and 0.9 were conducted using unnotched and notched, Kt=1.65 and Kt=3.65, axial loaded SAE 1045 steel specimens with hardness levels of Rc=10, 37, and 50. The monotonic notch strength ratio, NSR, for 5 of 6 test conditions was greater than 1, which allowed many notched cyclic test values of Smax or Sm to exceed the unnotched ultimate tensile strength. Much notched specimen fatigue resistance at these high R ratios was superior to that of unnotched specimens. However, cyclic creep/ratcheting, particularly for Rc=10 and 37, was a predominant cause of failure.

The objective of this research was to determine the feasibility of applying strain based fatigue life calculation models, which are commonly used for metals, to smooth SRIM polymer matrix composite axial specimens subjected to variable amplitude loading. A thorough investigation of the monotonic and strain controlled constant amplitude low cycle fatigue behavior of this material was conducted, including the effects of mean strains/stresses on the fatigue life of smooth specimens. Using these results, mean stress life calculations were made on the constant amplitude tests, as well as on smooth specimens subjected to strain controlled variable amplitude loading, using the Morrow and SWT mean stress models. These results were compared to experimental data, and it was found that the correlation between experimental and calculated lives was very poor, for both the constant amplitude and variable amplitude tests.

The objective of this research was to obtain and compare fracture toughness, stress corrosion cracking and constant and variable amplitude fatigue behavior of AZ91E-T6 cast magnesium alloy in both an air and 3.5% NaC1 corrosive environment. An additional objective was to determine if commonly used models that describe fatigue behavior and fatigue life are applicable to this material and test environments. Fatigue tests included constant amplitude strain-controlled low cycle fatigue with strain ratio, R, equal to 0,−1 and −2, Region II constant amplitude fatigue crack growth with load ratio, R, equal to 0.05 and 0.5 and variable amplitude fatigue tests using keyhole notched specimens. In all fatigue tests, the corrosion environment was significantly detrimental relative to the air environment. The material was also susceptible to stress corrosion cracking. Low cycle fatigue models and the Paris equation properly represented the fatigue data in both environments.

A general methodology and associated computational algorithm for predicting realistic postures of digital humans (mannequins) in a virtual environment is presented. The basic plot for this effort is a task-based approach, where we believe that humans assume different postures for different tasks. The underlying problem is characterized by the calculation (or prediction) of the joint displacements of the human body in such a way to accomplish a specified task. In this work, we have not limited the number of degrees of freedom associated with the model. Each task has been defined by a number of human performance measures that are mathematically represented by cost functions that evaluate to a real number. Cost functions are then optimized, i.e., minimized or maximized subject to a number of constraints. The problem is formulated as a multi-objective optimization algorithm where one or more cost functions are considered as objective functions that drive the model to a solution.

The effect of restrictive clothing on functional reach and on balance and gait during obstacle crossing of five normal subjects is presented in this work using motion capture and stability analyses. The study has shown that restrictive clothing has considerably reduced participants' functional reach. It also forced the participants to change their motion strategy when they cross-higher obstacles. When crossing higher obstacles, the participants averted their stance foot, abducted their arms, flexed their torso, used longer stance time, and increased their hip angle in the medial-lateral (Rolling) and vertical (Yawing) directions. The stability analysis of a virtual human skeletal model with 18 links and 25 degrees of freedom has shown that participants' stability has become critical when they wear restrictive clothing and when they cross higher obstacles.

This paper presents an optimization-based algorithm for simulating the dynamic motion of a digital human. We also formulate the metabolic energy expenditure during the motion, which is calculated within our algorithm. This algorithm is implemented and applied to Santos™, an avatar developed at The University of Iowa. Santos™ is a part of a virtual environment for conducting digital human analysis consisting of posture prediction, motion prediction, and physiology studies. This paper demonstrates our dynamic motion algorithm within the Santos™ virtual environment. Mathematical evaluations of human performance are essential to any effort to compare various ergonomic designs. In fact, the human factors design process can be formulated as an optimization problem that maximizes human performance. In particular, an optimal design must be found while taking into consideration the effects of different motions and hand loads corresponding to a number of tasks.

Simulating human motion is a complex problem due to redundancy of the human musculoskeletal system. The concept of task-based motion prediction using single- or multi-objective optimization techniques provides a viable approach for predicting intermediate motions of digital humans. It is shown that task-based motion prediction is in fact a numerical optimal control problem. Alternative formulations for simulation of human motion are possible and can be solved by modern nonlinear optimization methods. Three techniques based on state variable elimination, direct collocation and differential inclusion are presented and compared. The basic idea of the formulations is to treat different combinations of the state variables, such as the joint profiles and torques or their parametric representations as independent variables in the optimization process.

Workspace is an important function for human factors analysis and is widely applied in product design, manufacturing, and ergonomics evaluations. This paper presents the workspace analysis and visualization for Santos™ upper extremity, a new virtual human with over 100 DOFs that is highly realistic in terms of appearance, behavior, and movement. Jacobian Rank deficiency method is implemented to determine the singular surfaces. The joint limits are considered in this formulation; three types of singularities are analyzed. This closed-form formulation can be extended to numerous different scenarios such as different percentiles, age groups, or segments of body. A realtime scheme is used to build the workspace library for Santos™ that will study the boundary surfaces off-line and apply them to Santos™ in the virtual environment (Virtools®). To visualize the workspace, we develop a user interface to generate the cross section of the reach envelope with a plane.

This paper presents a SANTOS™ 25 degree-of-freedom (DOF) hand model and the forward and inverse kinematic analysis. The Denavit-Hartenberg (D-H) method is used to define the position of the end- effector (fingertip). In the SANTOS™ hand model each finger has different constraints and movements (e.g., the middle finger in distal Interphalangeal (DIP) joint can move in Flexion/Extension (F/E) with a range 0–100 degrees, and the thumb in interphalangeal (IP) joint can rotate in F/E with arrange of 15H/80). Including hand model SANTOS™ has over 100 DOFs and the forward and inverse kinematics have been studied. Optimization-based dynamic motion prediction will be used to consider different gestures for hand grasping.

This paper presents new capabilities of the virtual-human Santos™ introduced last year. Santos™ is an avatar that has extensive modeling and simulation features. It is a digital human model with over 100 degrees-of-freedom (DOF), where the hand model has 25 DOF, direct optimization-based method, and real-human like appearance. The newly developed analysis includes (1) a 25-DOF hand model that is the first step to study hand grasping; (2) posture prediction advances such as multiple end-effectors (two arms, two arms + head + legs), real-time inverse kinematics for posture prediction for any points, vision functionality; (3) dynamic motion prediction with external loads; and (4) musculosteletal modeling that includes determining muscle forces, and muscle stress.

Human performance measures such as discomfort and joint displacement play an important role in product design. The virtual human Santos™, a new generation of virtual humans developed at the University of Iowa, goes directly to the CAD model to evaluate a design, saving time and money. This paper presents an optimization-based workspace zone differentiation and visualization. Around the workspace of virtual humans, a volume is discretized to small zones and the posture prediction on each central point of the zone will determine whether the points are outside the workspace as well as the values of different objective functions. Visualization of zone differentiation is accomplished by showing different colors based on values of human performance measures on points that are located inside the workspace. The proposed method can subsequently help ergonomic design.

SI property class 12.9 high strength steel bolts were used to investigate the fatigue behavior of bolt threads rolled before/after heat treatment using two different thread profiles and five different preload values. Bolts were 3/8 UNRC-16 (coarse) and 3/8 UNRF-24 (fine) and preloads were taken as 1, 50, 75, 90, and 100% of roll before heat treatment proof stress. Maximum near surface residual compressive stresses, obtained via x-ray diffraction, ranged from -500 to -1000 MPa. Axial loads were applied through the nut and all fatigue failures occurred at the first thread of the nut/bolt interface. SEM evaluation indicated all fatigue crack growth regions contained multiple fatigue facets, while final fracture regions were ductile dimples.