Search Results

In-cylinder engine modeling is a necessary aspect of combustion research. In particular, simulating heat release connects variable combustion behavior to fuel properties through the 1st Law of Thermodynamics. One extension of such models is to evaluate changes to in-cylinder behavior using the Second Law of Thermodynamics in order to identify the peak period of availability for work extraction. Thus, Second Law models are a useful tool to augment research into alternative fuel usage and optimization. These models also help identify internal irreversibilities that are separate from heat transfer and exhaust gas losses. This study utilizes a multi-zone 1st and 2nd Law Heat Release model to characterize the changes in combustion behavior of a number of neat fuels used in a single-cylinder compression ignition (CI) engine.

Engine manufacturers are considering the implementation of thermodynamic cycles for Waste Heat Recovery (WHR) in order to increase Internal Combustion Engine (ICE) system thermal efficiency. For these secondary cycles, the literature illustrates the preference of Organic Rankine Cycles (ORC's) due to its simplicity and efficient recovery of the medium grade waste heat found in engine exhaust. This paper simulates the heat recovery capacity of eight dry fluids (butane, pentane, hexane, cyclopentane, benzene, toluene, R245fa, and R123) for an ORC based on the exhaust from a single-cylinder diesel engine-generator operating under five different loading conditions. The model, developed using REFPROP and the Matlab Optimization Toolbox, represents the physical components using isentropic pump and expander efficiencies, along with two-zone heat exchangers. All fluids present cycle efficiencies between 10-15%, with the heaviest hydrocarbons generating the largest amount of work.

Aerodynamic effects induced from vectoring an exhaust jet are investigated using a well established thin-layer Reynolds averaged Navier-Stokes code. This multiple block code has been modified to allow for the specification of jet properties at a block face. The applicability of the resulting code for thrust vectoring applications is verified by comparing numerically and experimentally determined pressure coefficient distributions for a jet-wing afterbody configuration with a thrust-vectoring 2-D nozzle. Induced effects on the body and nearby wing from thrust vectoring are graphically illustrated.

Particulate filters (PF) are a highly effective after-treatment device that reduces particulate matter emissions, a rising environmental concern in the automotive industry. However, accumulation of solid particles during the PF filtration process increases engine backpressure considerably, which can have a negative impact on engine efficiency, acoustics, and gaseous emissions. In this area, an accurate pressure drop model helps to better understand the effect of accumulated solid particles in the PF on engine backpressure, aiding in design and regeneration considerations without physical testing. These effects are further improved on board the vehicle using a single equation pressure drop model with a relatively low computational cost. This article presents a thorough history of PF pressure drop models and their advancements.

With the rapid growth of biodiesel production, it is prudent to research ways to improve its operation and performance in an engine, especially concerning fuel economy and exhaust emissions. This requires a thorough understanding of both the biodiesel production and engine operating processes. Completion of a published study of the impact of biodiesel fuel properties on engine operation indicated that it is difficult to draw conclusions about the exact causes of increased NOx emissions with respect to biodiesel properties without the capability of measuring engine cylinder pressures. As improvements were made to the authors' laboratory, a system to monitor and record pressure inside a diesel engine during operation was constructed to test dissimilar fuels. In the current work, three different fuels were tested in order to investigate combustion phasing, emissions, and fuel consumption as a function of fuel properties such as density, viscosity, Cetane Number, and energy content.

This study investigates the practicality of vehicle coast down testing as a suitable replacement to moving floor wind tunnel experimentation. The recent implementation of full-scale moving floor wind tunnels is forcing a re-estimation of previous coefficient of drag determinations. Moreover, these wind tunnels are relatively expensive to build and operate and may not capture concepts such as linear and quadratic velocity dependency along with the influence of tire pressure on rolling resistance. As a result, the method elucidated here improves the accuracy of the fundamental vehicle modeling equations while remaining relatively affordable. The trends produced by incorporating on road test data into the model fit the values indicated by laboratory tests. This research chose equipment based on a balance between affordability and accuracy while illustrating that higher resolution frequency equipment would further enhance the model accuracy.

Composite materials and structures are often avoided in general aviation vehicle applications because they are believed to be unnecessarily complex to design and analyze, and because manufacturing concerns often drive up cost and weight prior to component final delivery. In addition, concerns for component qualification are often cited, which relates to quality control and repeatability within manufacturing. These concerns may be readily overcome with modern software solutions that enable consideration of a significantly increased breadth of disciplines and definition of true three-dimensional geometry at the earliest stages of preliminary design. This paper addresses two such applications of knowledge-based software systems for composite materials and structures, wherein embedded knowledge capturing proven engineering practice is concurrently applied to design, analysis and manufacturing concerns.

The main issues related to the vibration response and acoustic noise emission of a new liquid fuelled fuel cell APU (auxiliary power unit) system are discussed and analyzed. These problems are being addressed in an on-going research project. The APU is comprised of several critical subsystems including the fuel processing system, fuel stack, heat exchanger, compressor, as well as high-pressure and low-pressure components. The vibration concern deals with the design of a two-stage isolation mount system to shield these critical parts from the shock and steady-state dynamics coming through the truck frame during on-road traveling conditions. A lumped parameter dynamic model is formulated for use in optimizing the mount stiffnesses and locations. Acoustic concerns are primarily related to exterior noise levels when the truck is at a rest stop. To address those issues, experimental studies are conducted to quantify the main sources and paths for noise.

Biodiesel is a potential alternative to Ultra Low Sulfur Diesel (ULSD); however, it often suffers from increased fuel consumption in comparison to ULSD when injection timings and/or pressures are similar. To decrease fuel consumption, increasing biodiesel injection pressure has been found to mitigate the issues associated with its relatively high viscosity and lower energy content. When doing so, the literature indicates decreased emissions, albeit with potentially greater nitrogen oxide (NOx) emissions in contrast to ULSD. In order to better understand the trade-off between fuel consumption and NOx emissions, this study explores the influence of fuel injection pressure on ULSD, Waste Cooking Oil (WCO) biodiesel, and their blends in a single-cylinder compression ignition (CI) engine. In particular, fuel injection pressures and timings for WCO biodiesel and blended fuels are adjusted to attempt to mimic the in-cylinder pressure profile of operation using ULSD.

The use of Compressed Natural Gas (CNG) has demonstrated the potential to decrease Particulate Matter (PM) and nitrogen oxide (NOx) emissions simultaneously when used in a dual-fuel application with diesel fuel functioning as the ignition source. However, some authors do find that NOx emissions can increase. One postulation is that the conflicting results in the literature may be due to the difference in composition of natural gas around the world. Therefore, in order to investigate if CNG composition influences combustion performance and emissions, four unique mixtures of CNG were tested (i.e., 87% to 96% methane) while minimizing the combined difference of the density, heating value, and constant pressure specific heat of each mixture. This was accomplished at moderate energy substitution ratios (up to 40%) in a single cylinder engine operating at various loads.

Diesel knock and ringing combustion in compression ignition (CI) engines are largely an unavoidable phenomenon and are partially related to the overall effectiveness of the fuel injection process. Modern electronic fuel injection systems have been effective at reducing the intensity of knock in CI engines, largely through optimization of fuel injection timing, as well as higher operating pressures that promote enhanced fuel and air mixing. In this effort, a single-cylinder CI engine was tested under a number of different combustion strategies, including a comparison of mechanical and electronic injection systems, increasing fuel injection pressures for biodiesel fuels, and the usage of dual-fuel combustion with compressed natural gas (CNG). Using in-cylinder pressure traces and engine operational data, the difference in injection mechanisms, fuel preparation, and their effects on knock intensity is clearly illustrated.

Utilizing a higher compression ratio in a Compression Ignition (CI) engine grants an obvious advantage of improved thermal efficiency. However, the resulting combustion temperatures promote dissociation ensuing in increased nitrogen oxide (NOx) emissions. Unfortunately, due to the inherent properties of CI combustion, it is difficult to achieve simultaneous reduction of NOx and particulate matter (PM) through conventional combustion methods. Taking a different route though accomplishing Homogeneous Charge Compression Ignition (HCCI) in CI engines will largely eliminate NOx and PM; however, combustion can result in a significant increase in hydrocarbon (HC) and carbon monoxide (CO) emissions due to the low volatility of diesel fuel. Hence, this work attempts another avenue of Low Temperature Combustion (LTC) by employing Pre-mixed Charge Compression Ignition (PCI) combustion on a comparatively higher compression ratio (21.2) single cylinder CI engine.

Transportation surveys illustrate that one of the most significant deterrents to bicycles as a form of conveyance is the concern with safety. Moreover, crash statistics also indicate that motor vehicles pose a severe risk to bicycles. As a result, this paper focuses on the development of a bicycle-mounted traffic monitoring system with the potential of providing early crash warnings to bicyclists. The system designed has a low monetary cost ($280.84) and is small enough to mount on a bicycle (94 mm × 56 mm × 89 mm). Moreover, it has sufficient range to track cars before they get dangerously close to the bike. The foundation of the system includes a Light Detection and Ranging (LIDAR) module that includes direct compatibility with microcontrollers. This LIDAR module interacts with a camera, stepper motor, and small computers through interfacing hardware and software. While robust, one limitation of the system is processing power.

The recent increase in natural gas availability has made compressed natural gas (CNG) an option for fueling the transportation sector of the United States economy. In particular, CNG is advantageous in dual-fuel operation alongside ultra low sulfur diesel (ULSD) for compression ignition (CI) engines. This work investigates the usage of natural gas mixtures at varying Energy Substitution Rates (ESRs) within a high compression ratio single-cylinder CI engine, including performance and heat release modeling of dual-fuel combustion. Results demonstrate the differing behavior of utilizing CNG at various substitution rates.

Selective Catalytic Reduction (SCR) catalysts used in Lean NOx Trap (LNT) - SCR exhaust aftertreatment systems typically encounter alternating oxidizing and reducing environments. Reducing conditions occur when diesel fuel is injected upstream of a reformer catalyst, generating high concentrations of hydrogen (H₂), carbon monoxide (CO), and hydrocarbons to deNOx the LNT. In this study, the functionality of an iron (Fe) zeolite SCR catalyst is explored with a bench top reactor during steady-state and cyclic transient SCR operation. Experiments to characterize the effect of an LNT deNOx event on SCR operation show that adding H₂ or CO only slightly changes SCR behavior with the primary contribution being an enhancement of nitrogen dioxide (NO₂) decomposition into nitric oxide (NO). Exposure of the catalyst to C₃H₆ (a surrogate for an actual exhaust HC mixture) leads to a significant decrease in NOx reduction capabilities of the catalyst.

The modeling of emitted hydrocarbons from internal combustion engines for exhaust aftertreatment devices has remained relatively unchanged since the early 1970s. This older model subdivides the hydrocarbon species into fast, slow, and non-oxidizing components. Current and future regulations from the United States Environmental Protection Agency stretch the abilities of this methodology, necessitating the need for more advanced modeling techniques. To this end, this paper provides a review on the different groups of hydrocarbons in order to provide background and contextual information on the different species expected in diesel emissions. Additionally, this work groups these species into different categories, depending on their chemical make-up, impact on human health, reactivity in the environment, and their prevalence within diesel emissions.

This paper describes a finite-difference method for unsteady transonic flow computation in frequency domain and transonic flutter prediction of complete aircraft configurations. The unsteady TSD equation as well as the boundary conditions are split into the in-phase and out-of-phase components in frequency domain by a nonlinear harmonic averaging technique. The resulting equations are solved by a steady flow algorithm. The unsteady pressure distributions for a rectangular wing and the ONERA M6 wing are analyzed and compared with other results to verify the code. The flutter characteristics for the AGARD I-445.6 wing, a cropped delta wing and a fighter configuration are computed and the results are discussed.

Autoignition delay times of diesel, methanol, biodiesel, and 50 wt%, 25 wt%, and 10 wt% biodiesel in methanol were measured in a constant-volume combustor. The autoignition delay times of biodiesel are similar to diesel and confirm the utility of biodiesel as a direct diesel alternative. While methanol has poor ignition characteristics, the 50 wt% blend performed similar to diesel. The 25 wt% and 10 wt% blends had ignition delay times between those of methanol and biodiesel. Methanol and biodiesel have a synergy in blends where the favorable ignition delay times of biodiesel and lower viscosity and cost of methanol combine to provide a better fuel.

Alternative fuels based on biomass have typically been specified in ways which substantially limit allowable compositions. These specifications are unlike those for petroleum based fuels which include mixtures comprised of hundreds of different compounds. Such narrow biofuel specifications are clearly disadvantageous by restricting any flexibility of using different biofuels to minimize costs and offset price fluctuations. This paper focuses on critical performance criteria for diesel fuels and provides experimental data on several, non-conventional biofuels. Experimental data includes the physical properties and ignition delay times of new, lower cost sugar formulations. The objective of this work is to develop specifications on volumetric heating value, viscosity, and ignition properties as well as other properties for compression ignition biofuels. Proposed fuel specifications would not include compositions, thereby allowing a variety of feedstocks to be used.

A parametric investigation was made to determine which aerodynamic design modifications can be made to improve significantly the performance of light airplanes. The study was made around a typical low wing and a typical high wing airplane. Performance parameters selected for comparison with the baseline configuration are: speed for best range, maximum level speed, specific range, maximum rate of climb, and speed for maximum rate of climb. It is shown that significant improvements in these performance parameters are possible by aerodynamic refinements. It is also shown that by application of modern high lift technology significant improvements in take-off and landing performance can be obtained. A similar analysis was employed to improve stability and handling characteristics such as spiral stability, dutch roll stability, and gust response.