Search Results

Abstract The non-pneumatic tire (NPT) has been widely used due to its advantages of no run-flat, no need for air maintenance, low rolling resistance, and improvement of passenger comfort due to its better shock absorption. It has a variety of applications in military vehicles, earthmovers, the lunar rover, stair-climbing vehicles, etc. Recently, the Unique Puncture-Proof Tire System (UPTIS) NPT has been introduced for passenger vehicles. In this study, three different design configurations, viz., Tweel, Honeycomb, and newly developed UPTIS, have been compared. The effect of polyurethane (PU) material nonlinearity has also been introduced by applying five different nonlinear PU material properties in the spokes. The combined analysis of the PU material nonlinearity and spoke design configuration on the overall tire stiffness and spoke damage prediction is done using three-dimensional (3D) finite element modelling (FEM) simulations performed in ANSYS 16.0.

Abstract More than a decade ago, we proposed combined use of direct injection (DI) and jet ignition (JI) to produce high efficiency, high power-density, positive-ignition (PI), lean burn stratified, internal combustion engines (ICEs). Adopting this concept, the latest FIA F1 engines, which are electrically assisted, turbocharged, directly injected, jet ignited, gasoline engines and work lean stratified in a highly boosted environment, have delivered peak power fuel conversion efficiencies well above 46%, with specific power densities more than 340 kW/liter. The concept, further evolved, is here presented for unmanned aerial vehicle (UAV) applications. Results of simulations for a new DI JI ICE with rotary valve, being super-turbocharged and having gasoline or methanol as working fuel, show the opportunity to achieve even larger power densities, up to 430 kW/liter, while delivering a near-constant torque and, consequently, a nearly linear power curve over a wide range of speeds.

Abstract Transient numerical simulations are conducted over a NACA 0012 airfoil with triangular protrusions at a Reynolds number (Re) of 100000 using the γ-Reθ transition Shear Stress Transport (SST) turbulence model. Protrusions of heights 0.5%c, 1%c, and 2%c are placed at one of the three locations, viz, the leading edge (LE), 5%c on the suction surface, and 5%c on the pressure surface, while the angle of attack (AOA) is varied between 0° and 20°. Results obtained from the time-averaged solution of the unsteady Navier-Stokes equation indicate that the smaller protrusion placed at 5%c on the suction surface improves the post-stall lift coefficient by up to 59%, without altering the pre-stall characteristics. The improvement in time-averaged lift coefficients comes with enhanced flow unsteadiness due to vigorous vortex shedding.

Abstract A flight envelope for aircraft performance in the vertical plane illustrates the performance limitations on the aircraft, usually indicating the minimum and maximum airspeeds at a given altitude, the airspeeds for maximum rate of climb and maximum angle of climb at a given altitude, and the maximum altitude or absolute ceiling of the aircraft. This study outlines the procedure for constructing a vertical-plane flight performance aircraft for an aircraft with a fixed-pitch propeller, which involves additional complexities due to the variable propeller efficiency. The propeller performance, engine power, and drag polar models are described, as is the computational procedure. Envelopes for the flight performance in the vertical plane are presented for a particular remotely-piloted aircraft at different take-off weights.

Abstract On contrast to the qualitative approach used in the majority of researches, an evaluation quantitative approach is introduced not only to depict the plain individual effect of the influence of the high-pressure torsion (HPT) processing conditions on the microstructural and Hv-values of the ultra-hard nanostructured AA6061-15%SiCp composite but also to detect its possible parameters functional interaction and nonlinear trends involved. Experimental data were used to establish many adequate and significant empirical models to detect and to evaluate the mutual functional interrelationships between the Hv-values of the composite, each of HPT processing pressure, and number of revolutions. For each group of interrelated parameters, the preferred selected developed model has been exploited to generate the relevant contours and response surface graphs.

Abstract A key element in an ergonomically designed driver’s seat in a car is the correct identification of driver seating position and posture accommodation. Current practice by the automotive Original Equipment Manufacturer (OEM) is to utilize the Society of Automotive Engineering (SAE) J1517 standard practice as a reference. However, it was found that utilizing such guidelines, which were developed based on the American population, did not fit well with the anthropometry and stature of the Malaysian population. This research seeks to address this issue by comparing the SAE J1517 Model against Malaysian preferred driving position. A total of 62 respondents were involved for the driver seating position and accommodation study in the vehicle driver’s seat buck mockup survey and measurements. The results have shown that the Malaysian drivers prefer to sit forward as compared to the SAE J1517 Model and have shorter posture joint angle.

Abstract TOC

Abstract Autonomous vehicles (AVs) are being rapidly introduced into our lives. However, public misunderstanding and mistrust have become prominent issues hindering the acceptance of these driverless technologies. The primary objective of this study is to evaluate the effectiveness of a driving simulator to help the public gain an understanding of AVs and build trust in them. To achieve this aim, we built an integrated simulation platform, designed various driving scenarios, and recruited 28 participants for the experiment. The study results indicate that a driving simulator effectively decreases the participants’ perceived risk of AVs and increases perceived usefulness. The proposed methodologies and findings of this study can be further explored by auto manufacturers and policymakers to provide user-friendly AV design.

Abstract Despite more and more rigorous defense mechanisms in place for cyber-physical systems, cybercriminals are increasingly attacking systems for benefits using a variety of means including malware, phishing, ransomware, and denial of service. Cyberattacks could not only cause significant economic loss but also disastrous consequences for individuals and organizations. Therefore, it is advantageous to detect and fix potential cyber vulnerabilities before the system is fielded. To this end, this article presents a language, VERDICT, and a novel framework, Cyber Vulnerability Analysis Framework (CyVAF) to (i) define cyber threats and mitigation defenses based on system properties, (ii) detect cyber vulnerabilities of system architecture automatically, and also (iii) suggest mitigation defenses. VERDICT is developed as an annex to the Architecture Analysis and Design Language (AADL) but can also be used independently.

Abstract Accelerated durability testing of automotive components has become a major interest for the ground vehicle Industries. This approach can predict the life characteristics of the vehicle by testing fatigue failure at higher stress level within a shorter period of time. Current tradition of laboratory testing includes a rigid fixture to mount the component with the shaker table. This approach is not accurate for the durability testing of most vehicle components especially for those parts connected directly with the tire and suspension system. In this work, the effects of the elastic support on modal parameters of the tested structure, such as natural frequencies, damping ratios and mode shapes, as well as the estimated structural fatigue life in the durability testing were studied through experimental testing and numerical simulations.

Abstract Letter from the Guest Editors

Abstract Water quality monitoring is needed for the effective management of water resources. Periodic sampling and regular inspection/analysis allow one to classify water and identify changes or trends in water quality over time. This article presents a novel concept of an Amphibious Hybrid Unmanned Aerial Vehicle (AHUAV) that can operate in air and water for rapid water sampling, real-time water quality analysis, and water body management. A methodology using the developed AHUAV system for water body management has also been proposed for an easier and effective way of monitoring water bodies using advanced drone technologies. Using drones for water body management can be a cost-effective and efficient way of carrying out regular inspections and continual monitoring.

Abstract TOC

Abstract Wheel alignment audit systems are used in vehicle service environments to identify vehicles which may benefit from a comprehensive evaluation on a precision static alignment measurement system. Non-contact dynamic wheel alignment audit systems acquire measurement data from vehicles in motion passing between sensors in an inspection lane. The dynamic nature of the moving vehicles introduces variables which are not present when auditing wheel alignment on a static vehicle. Measurement results are affected by changes in vehicle velocity, steering movement, suspension movement, floor surface conditions, tire sidewall profiles, and driver presence, as well as other variables.

Abstract Increasing the strength of materials is effective in reducing weight and boosting structural part performance, but there are cases where the residual strain generated during the process of manufacturing of high-strength materials results in a decline of durability. It is therefore important to understand how the residual strain in a manufactured component changes due to processing conditions. In the case of a connecting rod, because the strain load on the connecting rod rib sections is high, it is necessary to clearly understand the distribution of strain in the ribs. However, because residual strain is generally measured by using X-ray diffractometers or strain gauges, measurements are limited to the surface layer of the parts. Neutron beams, however, have a higher penetration depth than X-rays, allowing for strain measurement in the bulk material.

Abstract The increasingly important need to design simpler structures, reducing the number of constituent components, has motivated the approach outlined in this article, which proposes an effective reengineering example of a product belonging to the automotive industry, combining the advantages offered by the compliant mechanisms with production opportunities linked to the use of additive manufacturing. Taking advantage of compliant mechanisms makes it possible to significantly improve the component’s production phase, leading to undoubted benefits on the supply chain and on product’s time to market, benefits made possible by exploiting the outstanding characteristic of additive manufacturing to produce already assembled multi-material structures.

Abstract The Magic Formula (MF) Tire Model has received wide acclaim for vehicle dynamic simulations. However, it requires that the model parameters be determined for a particular tire, which in turn is a difficult task due to the large number of parameters involved. This work presents a study on the use of a Cascading Algorithm for determining the MF parameters, which is later packaged as a parameter estimation tool. Extending findings from previous research, the cascading algorithm aims to combine the strengths of both the Genetic Algorithm and Nelder-Mead Simplex (NMS) algorithm for the tire model fitting process. The algorithm performance is evaluated based on a total of 456 test datasets of six tires from four different manufacturers. The results show good fitting capabilities (86.5% of the fits have a coefficient of determination greater than 0.9) along with capturing the data trends accurately.

Abstract Tires are one of the most important vehicle components since they significantly affect vehicle attributes such as handling stability, steering controllability, ride comfort, and structure durability. However, whether for tire competitive benchmarking or vehicle conceptual design, data insufficiency tends to restrict the development process. This article presents a procedure of establishing a database for the evaluation of tire and vehicle impact vibration. Forty-three tires with various sizes and usages were selected to build the datasets. The rigid ring model was used to characterize each individual tire sample on account of our application requests. In view of the test resources, an optimization approach to the standard parameterization method was proposed and fully validated with the measurement database. The parameter characteristics were then statistically investigated and compared between the different tire types.

Abstract Threat identification and security analysis have become mandatory steps in the engineering design process of high-assurance systems, where successful cyberattacks can lead to hazardous property damage or loss of lives. This article describes a novel approach to perform security analysis on embedded systems modeled at the architectural level. The tool, called Security Threat Evaluation and Mitigation (STEM), associates threats from the Common Attack Pattern Enumeration and Classification (CAPEC) library with components and connections and suggests potential defense patterns from the National Institute of Standards and Technology (NIST) Special Publication (SP) 800-53 security standard. This article also provides an illustrative example based on a drone package delivery system modeled in AADL.

Abstract Load-time histories can be used to predict vehicle durability by calculating the pseudo damage (PD) through one or more load paths for a vehicle. When the dynamics of each load path are taken into account, a PD density (damage per distance traveled) can be expressed for each load path for any given road input to a vehicle. When damage is expressed as a PD density for a segment of road, separable damaging events can be identified using the PD density in all load paths of interest for a vehicle. However, it would be beneficial if events with similar damage characteristics can be identified and grouped together to provide an additional level of durability information. The objective of this work is to develop a similarity test for identifying the similarity/dissimilarity between multiple damaging events using the damage characteristics in multiple load paths. The damage characteristics for events are defined using the distribution of PD density samples for all known load paths.