Search Results

Easy to control Designers grab a range of technologies to create controls that are simpler for operators to use. Designing quiet off-highway equipment OEMs and suppliers are using new materials and innovative designs to reduce NVH for both vehicle operators and the environment. Using FEA in off-highway design The process of considering weld redundancy in virtual simulation is a complex way of ensuring that weldment design is robust enough to prevail over accidental weld redundancy that might occur during manufacturing. Efficient and effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, begins term as chief elective officer of SAE International. Making battlefield targets disappear The use of 'smart' special materials has the potential to radically alter the way military platforms are defended, and used.

Look Ma, no driver Unmanned vehicles evolve quickly as processors, sensors improve performance. Calling all hydraulics engineers As the industry knows all too well, hydraulics engineers are hard to come by; a look at how companies are hiring, training, and, most important, retaining engineers. Making diesels quiet and clear Researchers look at the relative influence of gear design parameters on the rattle noise of a diesel engine timing gear train.

Simulating cab noise and vibration Researchers at kubota and Doshisha University have established a prediction method for the engine-idling state using statistical energy analysis. Manufacturing cost estimating Caterpillar's ACT Group uses Micro Estimating Systems' computer-aided estimating program to increase efficiency and decrease operating costs in powder-metal part manufacturing. In search of greener pastures Agricultural OEMs are looking at the total life cycle to develop more environmentally conscious products and processes. Emissions and lubrication More stringent diesel emissions legislation is placing an increased burden on engine lubricant in the form of soot loading.

Changing demands reshape hydraulic components In a world of shrinking margins, fierce competition, and increasing regulations, equipment owners want nothing less than stellar performance from their equipment. Contact stress in valvetrains Engineers from Mahle compared FEA and Hertzian equations for the calculation of contact stress in a roller-follower valvetrain system. High-fidelity agricultural tires Researchers from Goodyear and John Deere developed finite element tire models capable of generating quasi-static spindle forces and moments for prescribed displacements over irregular terrain. Ag-equipment development challenges An engineer in the field discusses the need to tread carefully during the agricultural product-development process.

Communicating without drivers Autonomous vehiclesrely on data communications. A big plan for small engines The design procesas for Perkins' 400 Series is driven by choice via continuous product improvements, not just by regulations. Bringing field to lab Mahindra & Mahindra cuts testing and evaluation time with new test system and statistical tools. Planning new wheels for the Army The ambitious Future Tactical Truck Systems program aims to leverage commercial sector know-how to make safer, more capable military vehicles.

The man challenges of Tier 4 engineering Cutting and controlling emissions are the surface goals, but designers must also manage to cut and control costs, while adding complexity. A cool look at heat protection CFD is used to predict flow and thermal fields within the engine compartment both at steady state and transient conditions. Hushing hydraulics Researchers from the Georgia Institute of Technology put their energies into novel, compact devices for reducing fluid-borne noise.

Tying it all together Networks link control modules to bring more features and functions to the job site. Collaboration tools spread a wide net PLM suppliers are offering new tools that aid collaboration, expanding on core offerings in PDM, CAD, and CAE. The drive toward a hybrid transmission In-wheel hydraulic motors, hydraulic transformers, and a common pressure rail with accumulators put new meaning in the word drivetrain. A deep dive into metallurgical failure Even with the best engineering processes and quality planning, deviations can occur with the incoming material, things can go wrong during the manufacturing process, and service conditions can be different than expected. Standards and 'coopetition' In the heavy-duty vehicle arena, adoption of standards for networking benefits everyone.

Mining for silence According to an engineer from Cooper-Standard Automotive, active noise control is finally making the transition from marketing hype to viable product. Making a mining engine Customer demands for higher-speed diesel power provided the motivation behind the design of MTU's new 20-cylinder engine. Reader's Choice: Top technologies of the Year Readers have selected the ten most interesting stories in SAE Off-Highway Engineering during the past year. Results are based on the reader-response choices following feature articles and shorter technology items. The supply chain gang No longer in its infancy, e-business proves its worth by streamlining operations along the supply chain.

Getting the aero advantage Team Rahal has come up with several innovative ways of integrating and implementing Fluent Inc.'s computational fluid dynamics softwarae into its engineering process. Jordan Grand Prix benefits from 3-D design This motorsports team's transition from 2-D design to 3-D digital modeling using SDRC's I-DEAS software has resulted in shorter lead times and improved part fit. The 2002 Explorer/Mountaineer Ford engineers further improve ride, handling, and safety while increasing the vehicles' power. Cadillac's re-engineered Escalade The 2002 model has a host of new, advanced features including "Northstar-inspired" powertrains, StabiliTrak stability control, and a Road Sensing Suspension system. Explorer Sport Trac breaks new ground Ford says its 2001 Explorer Sport Trac, based on the 2001 Explorer four-door, was engineered for improved ride and handling, and is the first traditional SUV with an open cargo area.

Looking forward to safer highways New camera technologies, along with better algorithms and software, are enabling the move to active-safety systems that warn and then take control of vehicles in dangerous situations. Fuel-cell futures Eager to find alternative-propulsion solutions, automakers are betting that renewed emphasis on fuel-cell vehicles will pay off in the long run, with the latest examples aiming to prove higher-volume production feasibility. Consensus building ojn refrigerant type The hydrofluoro-olefin refrigerant HFO-1234yf has emerged as Europe's favored R-134a replacement, but some prefer R-744. Strengthening the link through software The next generation of simulation tools could help better synchronize manufacturing engineering and product design.

Systems drive safety Engineers are using a holistic approach to design safer vehicles by adding function and integrating multiple subsystems. The gas in greener Biodiesels promise to help reduce petroleum consumption and CO2 emissions, but much of the potential depends on production and infrastructure investment. Good vibrations Instead of excising all noise, vibration, and harshness, engineers are focusing more on making specific sounds and feedback "fit" a vehicle. SAE Commercial Vehicle Congress Preview International Truck and Engine executives head the charge for "positive industry change" at SAE's third Congress for the on- and off-highway communities.

Ultracapacitors charge ahead The limitations of current energy-storage solutions could encourage consideration of these alternative solutions, but more engineering work needs to be done to reduce costs. Technology for all Automotive industry executives expect high-end technologies, once considered only for inclusion in luxury cars, to increasingly make their way into entry- and mid-level vehicles in the very near future. Convergence continues A lot of automotive electronics ground has been covered at the Convergence conferences past, and there's more to come at this year's show in October. Fueling the next generation As hydrogen joins the battle for automotive power with gasoline and diesel, the future could be more choices rather than one winner.

Toyota Prius: Best-Engineered Car of 2001 Following the Japanese introduction of the first-generation Pruis in 1997, the significantly re-engineered second-generation model features new technology to meet the demands of the Western market, including improved driving performance, lower emissions, and reduced costs. Introducing Niel Schilke, SAE President for 2001 General Motors' former top engineer in Canada brings a systems engineering mentality, along with high expectations, to the SAE presidency. Fuel cells start to look real It is looking more and more as if the fuel-cell-powered car--the long-awaited "clean personal transportation of the future"--is moving from laboratory vision to technical reality, if not yet market actuality. Fuel-cell testing Capabilities that deliver reliable monitoring and control, as well as offer the benefit of a flexible configuration, are critical to keep pace with evolving fuel-cell technology, according to National Instruments.

Pulse Plasma Nitriding for Aerospace Application Ruggedization of Electronics for Deployed Military Environments Migrating Advanced Signal Processing Technology to Rugged SFF Platforms Radar Recording Proves Next-Level System Performance As radar and electronic warfare systems contend with an increasingly crowded environment, recording tests, interactions, and conflicts provides insight that can help assure future triumphs. > Facing 5G New Radio (NR) Test Challenges Communicating Via Long-Distance Lasers The Purpose of Mixed-Effects Models in Test and Evaluation The simplest version of a mixed model-the random intercept model, where so-called random effects represent group-wide deviations from a grand mean-can account for day-to-day deviations in system performance while still allowing the results to be generalized beyond the few days of observed testing.

R1T Exposed! A comprehensive teardown of Rivian's pioneering electric pickup reveals praiseworthy build quality, innovative thinking…and some lapses in manufacturability. EVs drive NVH materials innovation Skateboard platforms, high-frequency motor noise push lower dB thresholds and new countermeasure solutions. Optimizing design for additive manufacturing Avoiding the pitfalls of 3D printing requires knowing the process limitations - and how to work around them. An expert at a leading AM specialist shares insights on getting it right. Real-time processors help drive the zonal E/E revolution With its new generation of software-compatible processors, NXP aims to accelerate systems consolidation and performance.

Weaving a new future for composites In a shift perhaps as prolific as steel to aluminum, woven plastics may finally bring the magic of composites to cost-effective mass-production. New composites target EV applications No longer a low-volume play, the latest composite materials offer EV developers new options for lightweighting, thermal management and structures. Acura TLX is Honda's new body-build benchmark All-new for 2021, Acura's midsize sport sedan gets an exclusive platform to go with its structural, materials and dynamic advancements. Body development leader Jeremy Lucas explains. Schaeffler builds an e-motor powerhouse Armed with state-of-the-art manufacturing and a history of innovation, Schaeffler Group is attacking the e-mobility space, says Daniel Sayre.

Europe's double-decker giant "Aerospace Engineering" provides an overview of the issues and technocal challenges faced by Airbus in the development of the A380. Quiet please Several technologies are under development at GE Aircraft Engines that address strigent demands from the airlines for reduced noise emissions from new aircraft engines. Thermal material solutions Astrium has begun investigating several new metallic thermal protection system concepts for reusable launch vehicles. Bringing the best of both worlds in engine technology GE Aircraft Engines and Pratt & Whitney together developed the GP7000, a powerplant alternative for the Airbus A380 superjumbo aircraft.

Designing reliable boards The makers of electronic hardware are boosting reliability by reducing the number of components that can fail while improving ruggedization for those circuit boards. Better seen, not heard Reducing noise profiles is a multi-targeted task for engine OEMs, airframers, airport authorities, and regulatory agencies. Farnborough 2006 "Sustainable Aviation" will be a key subject as representatives of the global aerospace industry meet at the Farnborough International Airshow.

How Electrification and Autonomy Can Unlock the Potential of Unmanned Ground Vehicles VITA 90: Small Form Factors for UAVs and Other Space Constrained Platforms 3D Scanning Provides Key Weapon for Aerospace and Defense Manufacturing New Approach to Viscosity Enables Complex Motions in Soft Robots Ghoul Tool: The Weapon-Mountable Counter UAS Transmitter Autonomous Surveillance Technologies Relating to Dismounted Soldiers The development of the autonomous applications for dismounted Soldier systems is paramount to defeating our adversaries, such as China and Russia, in future combat. A comprehensive literature re-view is necessary to assist in defining the best path forward. Robust MADER: Decentralized Multiagent Drone Trajectory Planner Communication delays can be catastrophic for multiagent systems. However, most existing state-of-the-art multiagent trajectory planners assume perfect communication and therefore lack a strategy to rectify this issue in real-world environments.

The fantastic five Engineers at NASA Langley, NASA Glenn, and the Boeing Co. investigate new aircraft concepts designed to improve fuel economy. Addressing noise, emissions, and fuel efficiency In an interview with "Aerospace Engineering," Rolls-Royce Engineering Director Mike Howse explains the technical challenges and tradeoffs in jet-engine design and development. Doing business via the Internet It's not so much a matter of whether a company should use the Internet to conduct business, but how. This article looks at how two companies- one an aerospace parts maker, the other a provider of e-sourcing solutions- exploit the Internet. Improving processes through new solutions Several aerospace companies have implemented new engineering software products into their work processes to improve efficiency and productivity.