Search Results

A series of rigid wall tests have been conducted at three impact velocities to quantify the dynamic response of the Side Impact Dummy (SID) developed by US DOT. This paper reports the chest, pelvis and head responses of the dummy at various filter frequencies and describes the development and verification of the three-dimensional mathematical model of the Side Impact Dummy utilizing the rigid wall test results. The mathematical model uses the mass distribution and the linkage system of the current Part 572, Hybrid II dummy which forms the basic platform of the SID. The unique chest of the dummy is modeled by two systems of linkages simulating the rib cage and the jacket. Also included in the model is the internal hardware of the chest, e.g. a damper, rib stopper and a clavicle simulator at the upper spine. The material and linkage models are based on static and dynamic tests of the dummy components.

This paper describes the development of a three-dimensional lumped-mass structure and dummy model to study barrier-to-car side impacts. The test procedures utilized to develop model input data are also described. The model results are compared to crash test results from a series of six barrier-to-car crash tests. Sensitivity analysis using the validated model show the necessity to account for dynamic structural rate effects when using quasi-statically measured vehicle crush data.

Vehicle sound quality has become an important basic performance requirement. Traditionally, automobile noise studies were focused on quietness. It is now necessary for the automobile to be more than quiet. The sound must be pleasing. This paper describes a development process to improve both vehicle noise level and sound quality. Formal experimental design techniques were utilized to quantify various hardware effects. A-weighted sound pressure level, Speech Intelligibility, and Composite Rating of Preference were the three descriptors used to characterize the vehicle's sound quality. Engineering knowledge augmented with graphical and statistical techniques were utilized during data analysis. The individual component contributions to each of the sound quality descriptors were also quantified in this study.

Currently, one of the major challenges for automotive engineers is to provide additional protection to motor vehicle occupants involved in side-impact collisions. A considerable amount of research is being conducted into this problem by governments and motor vehicle manufacturers on a worldwide basis. Changes to the current safety standards relating to side impact protection have been proposed in both North America and Europe. The proposed standards involve the use of dummies in collisions between a moving barrier and a stationary test vehicle. A total of 22 side impact tests of production vehicles have been completed to date to assess the appropriateness of the test procedures developed in the U.S. and Europe in the context of the Canadian vehicle mix and associated side impact accident problem. Vehicle performance rankings provided by the two test procedures were found to vary greatly.

Two 50th percentile anthropomorphic test devices are specified as alternate test devices for FMVSS 208 compliance testing. These test devices are commonly known as the Hybrid II and the Hybrid III dummies. The designs of the two dummies are different, representing the state-of-the-art in the time frame of their designs. The trajectory differences between the two dummies have been published in the literature, but response differences, e.g., HIC and chest acceleration are not available in the literature. To quantify response differences between the two dummies, a series of sled tests with open bucks and with bucks simulating vehicle interior were conducted with restrained dummies. Additional crash tests were also conducted with the two dummies. This paper reports on an analysis of the data from the above series of tests. The data indicate that in non-head contact simulations with belt restraint systems, Hybrid III HIC's are nearly 50% higher than Hybrid II HIC's.

The objective of this study was to analyze available anthropomorphic test device (ATD) responses from KARCO rear impact tests and to evaluate an injury predictive model based on crash severity and occupant weight presented by Saczalski et al. (2004). The KARCO tests were carried out with various seat designs. Biomechanical responses were evaluated in speed ranges of 7-12, 13-17, 18-23 and 24-34 mph. For this analysis, all tests with matching yielding and stiff seats and matching occupant size and weight were analyzed for cases without 2nd row occupant interaction. Overall, the test data shows that conventional yielding seats provide a high degree of safety for small to large adult occupants in rear crashes; this data is also consistent with good field performance as found in NASS-CDS. Saczalski et al.'s (2004) predictive model of occupant injury is not correct as there are numerous cases from NASS-CDS that show no or minor injury in the region where serious injury is predicted.

Macroscopic constitutive behaviors of aluminum 5052-H38 honeycombs under dynamic inclined loads with respect to the out-of-plane direction are investigated by experiments. The results of the dynamic crush tests indicate that as the impact velocity increases, the normal crush strength increases and the shear strength remains nearly the same for a fixed ratio of the normal to shear displacement rate. The experimental results suggest that the macroscopic yield surface of the honeycomb specimens as a function of the impact velocity under the given dynamic inclined loads is not governed by the isotropic hardening rule of the classical plasticity theory. As the impact velocity increases, the shape of the macroscopic yield surface changes, or more specifically, the curvature of the yield surface increases near the pure compression state.

This study applies a detailed finite element model of the human body to simulate occupant knee impacts experienced in vehicular frontal crashes. The human body model includes detailed anatomical features of the head, neck, chest, thoracic and lumbar spine, abdomen, and lower and upper extremities. The material properties used in the model for each anatomic part of the human body were obtained from test data reported in the literature. The total human body model used in the current study has been previously validated in frontal and side impacts. Several cadaver knee impact tests representing occupants in a frontal impact condition were simulated using the previously validated human body model. Model impact responses in terms of force-time and acceleration-time histories were compared with test results. In addition, stress distributions of the patella, femur, and pelvis were reported for the simulated test conditions.

The responses of a 5th percentile female ATD in the driver and/or rear passenger positions of 56 crashes are described. The Transport Canada side impact programme consisted of LTV-to-car impacts, car-to-car impacts and IIHS barrier-to-car tests. The majority of the tests involved severe crash conditions for which the vehicles were not designed. The SID-IIs head, chest and abdominal responses were compared to determine the effects of the striking bullet geometry, the angle of impact, the impact point and the self-protective elements of the struck vehicle, including airbag technology and armrest designs. The SID-IIs head responses and deflection measures were sufficiently sensitive to discriminate between the various striking vehicles, crash configurations, airbag systems and armrest characteristics.

In the 1999 Supplemental Notice for Proposed Rulemaking (SNPRM) for Advanced Airbags, the National Highway Traffic Safety Administration (NHTSA) sought comments on the maximum speed at which the high-speed, unbelted occupant test suite will be conducted, i.e., 48 kph vs. 40 kph. To help address this question, an analysis of constraints was performed via extensive mathematical modeling of a theoretical restraint system. First, math models (correlated with several existing physical tests) were used to predict the occupant responses associated with 336 different theoretical dual-stage driver airbag designs subjected to six specific Regulated and non-Regulated tests.

Finite Element Analysis (FEA) models are routinely being adopted as a means of up-front design for automotive body structure design. FEA models play two important functions: first as a means of assessing design versus an absolute target; secondly they are used to assess the performance of design alternatives required to meet targets. Means of assessing model capability versus task is required to feed appropriate information into the design process. Being able to document model capability improves the credibility of the FEA model information. A prior paper addressed assessing the absolute performance of model technology using a metric based on a statistical hypotheses test that determines membership in a reference set. This paper extends the use of quality technology to determining the capability of the FEA model to span the design space using Designed Experiments.

Statistical Energy Analysis (SEA) models are routinely being adopted in up-front automotive sound package design. SEA models serve two important functions. First they provide a means of assessing noise and vibration performance relative to absolute targets. Secondly, they are used to assess various alternative designs or changes required to meet targets. This paper addresses how to objectively evaluate both the absolute and relative predictive capability of SEA models. The absolute prediction is assessed using a hypothesis test to determine membership of the analytical prediction relative to a set of test data. The relative prediction is assessed using hardware-designed experiments to estimate design sensitivities. Both have been found useful to drive model improvement efforts. Being able to objectively document model capability also improves the credibility of SEA model predictions and the design information they deliver.

Child dummies were seated in size appropriate child restraints and exposed to in-vehicle, static, side mounted airbag deployments as well as full scale side impact crash tests. The child seat sample included rear and forward facing child restraints and booster seats. Anthropomorphic test dummies (ATD) included an 18 month infant and fully instrumented Hybrid III 3 year old and Hybrid III 6 year old child dummies. Preliminary results suggest that properly restrained infants and children occupying age appropriate child seats may receive some protective benefits from side airbags provided the child seat and the child occupant are correctly positioned.

The NHTSA’s final interim rule on advanced airbags describes two static out-of-position test procedures for the 5th percentile female dummy. Recent testing by Transport Canada suggests that the procedure described for the positions may not be representative of the worst case condition and may include elements that are not realistic for a 5th percentile driver. A modified positioning procedure which prioritizes chest placement and positions the steering wheel in a location that is compatible with the visibility and comfort requirements of a 5th percentile female driver is described. A modified chin on hub procedure is also described. Results of the modified procedures are compared to the NHTSA procedures for a number of late model vehicles.

Drawing on recent Canadian field collision investigations and crash testing using the SIDIIs dummy, the field experience and crash performance of side-mounted airbag systems are reviewed. All of the inflatable technologies tested demonstrated the ability to greatly reduce head injury potential. Further improvements to the design of inflatable head protection devices are required to better ensure they contain and protect the head of occupants seated in locations forward of the mid seat track. New moving deformable barrier designs, such as the one recently developed by the IIHS, appear to offer significant advantages over designs currently used to regulate side impact protection. Improving the level of protection against chest injury to car occupants in SUV-to-car side impacts represents a significant challenge.

In 1998, Rouhana et al. described development of a new device, called the IR-TRACC (InfraRed - Telescoping Rod for Assessment of Chest Compression). In its original concept, the IR-TRACC uses two infrared LEDs inside of a telescoping rod to measure deflection. One LED serves as a light transmitter and the other as a light receiver. The output from the receiver LED is converted to a linear function of chest compression using an analog circuit. Tests have been performed with IR-TRACC units at various labs around the world since 1998. A first-generation IR-TRACC system was retrofit into a Q3 dummy by TNO. Similarly, a mid sized male Hybrid III dummy thorax and a small female Hybrid III dummy thorax have been designed by First Technology Safety Systems (FTSS) such that each contains 4 second-generation IR-TRACC units. The second-generation IR-TRACC is the result of continued development by FTSS, especially in the areas of the analysis circuit, manufacturing and calibration methods.

A theoretical, mathematical, risk assessment procedure was developed to estimate the fraction of drivers that incurred head and thoracic AIS3+ injuries in full-engagement frontal crashes. The estimates were based on numerical simulations of various real-world events, including variations of crash severity, crash speed, level of restraint, and occupant size. The procedure consisted of four steps: (1) conduct the simulations of the numerous events, (2) use biomechanical equations to transform the occupant responses into AIS3+ risks for each event, (3) weight the maximum risk for each event by its real-world event frequency, and (4) sum the weighted risks. To validate the risk assessment procedure, numerous steps were taken. First, a passenger car was identified to represent average field performance.

Risk curves are developed for several crash data sets, expressing the probabilities of injury as a function of HIC, Extension Moment, Neck Tension and Maximum Deflection, respectively. The statistical method uses concept of thresholds that are interval censored and right censored. A combined evaluation method is used to select a “best” curve among the curves derived from various methods.

This paper discusses an attempt to relate measured loading at the head neck junction of arestrained six year old ATD during a frontal crash, to the mechanism of upper cervical fracture dislocation in young children. Lap belt, lap shoulder belt anda four point restraint system are considered. The basis for the reconstructions is the fatal injury to lap-belt restrained young children seated in the rear seat of contemporary minivans. The study concludes that simple forces and bending moments measured on such an ATD may not provide a sufficient basis for judging the likelihood of such an injury. Suggestions for a more comprehensive injury analysis are made.

Body structure design and development is becoming more and more critical for noise, vibration and harshness (NVH) vehicle performance. Many body structure design alternatives are studied analytically and in hardware during a vehicle program. Because of design and fabrication time, body structure hardware development can be very expensive and extremely time consuming. Consequently, the use of experimental design techniques for vehicle NVH development are becoming more popular to bring quality products to the market faster. This paper demonstrates how an experimental approach was used to develop the body structure. Initially, a hardware experiment was used to assess the effects of four parts groups for Body Chassis NVH. Then, to further study the major parts groups, a computational experiment was performed. The result of these two experiments (hardware and computational) was used to recommend design concepts which reduced interior noise levels and improved body chassis NVH.