Search Results

This work presents a study on the related basic aspects with the accelerated tests used in the industry to determine or to confirm the reliability of an item and of the methodologies currented to analysis of the accelerated tests of life of the products. Are argued the importance of the models for each distribution and the methodologies applied in the work.It is implemented programs of computation in VISUAL BASIC language that allow the management and the adequacy for the processing of the data proceeding from the accelerated tests with constant stress and simple failure mode, for complete data, and with censorship the right or multiple, using the distribution of Weibull, Log-normal and Normal, combined with the most used models (Arrhenius model and Inverse Power Law), the program allows to the processing of the data of the accelerated tests for two methods, Squared Minimums and Maximum Likelihood Principle.

This work is basically a dirigibility study applied to tricycles of human traction, HPT - Human Powered Tricycle. The behavior of the vehicle is simulated in a track with compacted floor, contend curves, straight line, up and down grades. A simplified mathematical model is used to model the system (vehicle + cyclist). As the system of equations obtained is extremely coupled and non-linear, it is necessary to use numeric procedures to solve the equations and to obtain the behavior of the system during its path in the racetrack. The influences of the track and the mass center position of the vehicle in its stability, the behavior of the vehicle using chainset transmissions and CVTs (Continuously Variable Transmission) are also analyzed.

The design methodology have been proved its effectiveness concerned to new products development, and due to the systematic approach it allows great variety of solutions and concepts developed in the early concept design phase. This paper shows two efficient methods in concepts generation, they are: the brainstorm and the morphologic chart. Both were successfully used and the result was a new concept of wheelchair motorization which the electric motors are activated only when the force applied over the propulsion ring exceeds a preset value. This new concept was registered at INPI as an invention patent.

The design methodology have been proved its effectiveness concerned to new products development, and due to the systematic approach it allows great variety of solutions and concepts developed in the early concept design phase. Axiomatic design was use to create collaborative strategies aiming to reduce the number of control strategies tests. Besides only one of required functions was developed and test each time. A wheelchair dynamic model was developed to test the strategies. At the end of the processes a role and complex control strategy was developed and only validation tests were need to apply the solution in wheelchair motorization.

This study aims to evaluate the impact that changes in the parameters of the project to a continuously variable transmission has on its ability to transmit torque and power. A half-toroidal transmission is cinematically analyzed and key geometric parameters and their relationships are studied and characterized. A change in the parameters of the transmission geometry allows a verification of their influence on the entire system live-time for any type of cycle, as defined in the theory of life provided the causes of failure, fatigue and subsurface. Additionally is possible to evaluate the capability of transmitting torque through the theory of Elasto-Hydrodynamic (EHD) contact relationship and the range of possible transmission ratio to be achieved. In this paper, a geometric model of a traction based Half-toroidal CVT (see figure 1) were explored by adding new geometric parameters related to the system control mechanism (the roller tilting angle).

One traditional solution to start an internal combustion engine is the starter motor. Since its conception little was changed in its operational dynamics, even after passing by several design optimization processes. This fact elapses from the absence of application of an analysis tool capable to express the existing relations between its subgroups and the functions that these play. The main goal of the present work is to get a complete mapping of all the functions, components and flows of information and energy, through the application of an existing methodology of analysis, known for “function structure technique”, on the described product. Therefore, this mapping will supply a better understanding of the product architecture. First of all, the composed system for the starter motor is divided hierarchically in subsystems according to the existing assemblies. The operation chain is then separated through static and dynamic inspections during its use in the combustion engine.

In this work the main objective is the development of systems for motorization of conventional wheelchairs, and the great mass of wheelchairs now available in Brazil of the simplest type than they don't allow the pure and simple conversion for motorization. In this aspect the problem comes as a challenge because the great variety of models and types of wheelchairs and the lack of a rigorous normalization impose the use of technologies of search of solutions and the application of methodology knowledge and systematic of project. In this way, firstly a study will be accomplished on the object wheelchair, containing: historical, origin, types and characteristics. The following step will be the search of the possibilities of motorizing conventional wheelchairs, limitations and applications.

The increasing market of the continuously changeable transmissions demands that its characteristics of performance fully are known and constantly developed. Of the some existing constructive types one initially opted to the modeling of the system of pulleys of changeable diameter and leather strap. Knowing, that the transmissions are part of the train of force of any vehicle, the model will go to include the characteristics of exit of the engine, torque and rotation and all the components of an automatic transmission that uses CVTs. The initial objective is to determine the geometry of functioning and the positioning of the leather strap in the CVT. Saber its behavior, if it is playing its role in the excellent way.

Due to the current changes in the automotive industry several new technologies are being developed and the old ones analyzed. The epicyclic gear trains, or planetary gear trains, are important in the automatic transmissions. In this paper a model is presented to describe the behavior of the transmission during the process of gear change. For this the system chose must be fully described, that means the relation among the rotations of the components must established.

Epicyclic gear trains are important part of automotive transmissions. They are present in automatic transmissions and in differentials of most vehicles. The dynamic behavior of a single epicyclic gear is well known, and this study presents the results obtained based in a model of a complete transmission. Initially the Wilson gearbox is presented. The main principles of the model are described. Following, the results of a simulation using the model are shown. Finally, the influence of the inertias in the model are presented and it is done some discussion about it

In this paper a review about epicyclic gear trains (EGTs) or planetary gear trains (PGTs) is initially presented. These gear trains are transmission systems of high kinematic complexity and difficult visualization. However, their advantages are many: they are compact, light, allow high speed reductions, possess high reliability because they have constant engagement, possess bifurcating capacity and power addition, and allow multiple transmission ratio. One of their main applications is the automatic transmission or power trains of passenger cars and other modern vehicles e.g. trucks, buses, etc. Then, some classic automatic transmission boxes e.g. Simpson, GM Hydra Matic 440 PGT, Ravigneaux, etc. and the TEPiciclo software are shown. This software was created to help in design development for automatic transmission of light vehicles with two simple PGTs linked.

The development of hybrid vehicles has reached in recent years a high technical and commercial importance. In general, varied vehicular settings enable a motorization with several alternatives and conventional energies combined in order to increase the performance while reducing consumption and environmental impact. In the context of hybridization, particular attention has been given to vehicles that consider a secondary driving source of electric nature, mainly in countries where its cost is relatively low when compared with the cost of fossil fuels such as gasoline. This paper aims to achieve an economic and energy analysis of a hybridized vehicle. The last one has a conventional traction front-wheel driven by an internal combustion engine (ICE) and an electric traction rear-wheel propelled by electric motors (EMs) in-wheel.

Chassis dynamometers are important equipment to perform vehicular experiments in the automotive industry. Usually, these equipments are used according to standard procedures for emissions, fuel consumption, and performance analyses. In this paper, an alternative procedure was developed to experimentally determine the dynamometer inertia and losses related to bearings and transmission systems. Furthermore, a study on the tires rolling resistance, considering a double tire-roller contact, was carried out. The experiments were performed in a 4x2 chassis dynamometer with four rollers, equipped with an eddy current brake (coupled to a transmission reducer of 2.5 instrumented with a 3000 Nm torque flange) and with a 30 CV AC electric motor (coupled to a planetary transmission with reduction of 4.43 and instrumented with a 500 Nm torque flange). The dynamometer was also instrumented with an encoder system for speed measurement.

A Torque converter is a type of hydro-mechanical device, vastly utilized in the automatic transmission of vehicles and other machines. It is a critical component of the transmission system, having a direct impact on the fuel economy and vehicle´s performance. Computational Fluid Dynamics (CFD) has been employed by many authors and engineers to better understand the complex behavior of fluids inside of torque converters, in a way that it provides design improvements and increases model accuracy. This article presents a methodology that applies CFD as a tool in the design process of automobile torque converters. Therefore, this paper performs an extensive review of CFD associated with torque converters, and the principal concepts are stated and used to have a better understanding of the system’s dynamic behavior. Additionally, this article details some of the work done to develop an automotive torque converter model using the commercial software ANSYS CFX.

The purpose of this paper is evaluating the amount of kinetic energy available to be regenerated by a hybrid electric vehicle (HEV) undergoing the Brazilian standardized driving cycle. Improvements on energy efficiency of the cars has become an urgent target of the Brazilian industry since Brazil launched a new automotive regulation imposing the reduction of 15.5% on the fuel consumption of the vehicles to be sold in this country in 2017 comparing to 2011. The HEVs are a possible solution for this situation. They are widely known by the high efficiency, mainly the ones capable to make the regenerative breaking, rescuing an already paid energy. Before the launch of HEVs in Brazil, the feasibility of these vehicles has to be accurately studied and one aspect to be evaluated is how much energy is possible to be rescued in the Brazilian standardized driving cycle.

Had to the development of new projects of vehicles more economic as for example, the hybrid vehicles, have become bigger investments in transmission systems mechanics more adjusted. Thus being the increasing market of the continuously changeable transmissions it demands that its characteristics of performance fully are known and constantly developed. Of the some existing constructive types one initially opted to the modeling of the system of pulleys of changeable diameter and leather strap. To leave of this modeling one became alterations of some components and verified the behavior of this CVT in a simulation of passage of a vehicle. This passage was drawn so that the vehicle more faced daily situations of a vehicle considered in a track accented, that requested of the transmission the reactions boundary lines that supplied to torque and power of enough engine, or, so that the vehicle executed the passage, a not to leave of the limitations of the system and the CVT.

It is considerable the number of research around the subject of motorization of conventional manual wheechairs, however the found models don't take care of the real necessities of the wheelchair users. In the manufacture the necessity of an independent vehicle for the load transport exists. With the increasing necessity in Brazil to develop the knowledge in the area of independent vehicles and not being still available a towboat of tests adjusted to approach such problems. The articulated towboat is an intelligent independent vehicle to tow loads. The users of conventional manual wheelchairs will go to use this vehicle when to need motorization, that is in ascent cases, descending of ramps, or long distances. This vehicle possesss practical applications that they can assist systems of support to the rehabilitation of physical and motor deficiencies and also systems automatized of manufacture.

The hybrid electric vehicle (HEVs) is an alternative to reduce the high dependence on petroleum products, because maintains the characteristics attributed to conventional vehicles such as performance, safety and trustworthiness and reduced the fuel consumption. Some modifications are necessary in the vehicle longitudinal dynamics equationing, to provide a specific power management control system, because of the electrical power source addition that complements the conventional engine and powertrain system. In this paper is used the HEV parallel configuration, where both drive systems are directly connected to the vehicle wheels, maintaining the engine/powertrain in the front wheels and electric motors directly coupled to the rear vehicle wheels.