Search Results

This Digital Annex (DA) contains the current, full-PDF version of ARP5149B, Training Program Guidelines for Deicing/Anti-Icing of Aircraft on Ground, as well as .jpeg format files of Appendix D, Application Guidelines Configuration, Critical Component, and Spray Area Diagrams for Aircraft. The .jpeg diagram files may be used by purchasers in accordance with the terms of the included license agreement.

This document establishes the minimum criteria for effective training of air carrier and contractor personnel to deice/anti-ice aircraft to ensure the safe operation of aircraft during ground icing conditions. Appendix D specifies guidelines for particular airplane models.

Create a method/procedure to measure build up and concentration of CO2 in the passenger compartment.

The purpose of this SCR filter test method is to provide standardized methods for evaluation the filter characteristics of the SCR filter by bench test methods. This, combined with data obtained from application test, maybe used to establish standards of performance for filters when tested by these standard methods. Many variation in requirements of filtration to protect the SCR supply equipment on vehicles and variations in operational conditions make it difficult to specify meaningful “in-service” performance standards by which a filter may be judged. By the use of these standard test methods, test conditions are always the same, and comparison of the laboratory performance of filters may be made with a high degree of confidence. Once the requirement of a particular application are known, performance standards for suitable filters may be established by these test methods, and adequacy of performance of filters for the job may be determined.

This SAE Aerospace Recommended Practice (ARP) provides guidance to develop and assure validation and verification of IVHM systems used in autonomous aircraft, vehicles and driver assistance functions. IVHM covers a vehicle, monitoring and data processing functions inherent within its sub-systems, and the tools and processes used to manage and restore the vehicle’s health. The scope of this document is to address challenges and identify recommendations for the application of integrated vehicle health management (IVHM) specifically to intelligent systems performing tasks autonomously within the mobility sector. This document will focus on the core aspects of IVHM for autonomous vehicles that are common to both aerospace and automotive applications. It is anticipated that additional documents will be developed separately to cover aspects of this functionality that are unique to each application domain.

The purpose of this AIR is to compile in one definitive source, commonly accepted calibration, acceptance criteria and procedures for simulation of Supercooled Large Droplet (SLD) conditions within icing wind tunnels. Facilities that meet the criteria for either some or all of the recognized conditions will have known SLD icing simulation capability.

The scope of this document is to provide a guidance of the common contamination types and their concentrations in order to size FTIS components and characterize its performance on generic commercial aircraft.

This document is intended to serve two purposes: (1) provide a list of topics for potential customers to ask of the facility to aid their selection decision-making, and (2) provide a list of icing wind tunnel and engine test stand facilities that simulate flight through icing or ice crystal clouds.

This Aerospace Informational Report (AIR) provides guidance on using environmental, electrochemical, and electrical resistance measurements to monitor environment spectra and corrosivity of service environments, focusing on parameters of interest, existing measurement platforms, deployment requirements, and data processing techniques. The sensors and monitoring systems provide discrete time-based records of 1) environmental parameters such as temperature, humidity, and contaminants; 2) measures of alloy corrosion in the sensor; and 3) protective coating performance in the sensor. These systems provide measurements of environmental parameters, sensor material corrosion rate, and sensor coating condition for use in assessing the risk of atmospheric corrosion of the structure.

This document provides information on current practices for testing air data probes to 14 CFR Part 33 Appendix D ice crystal and mixed phase icing conditions. This AIR is primarily concerned with techniques for measuring the flow and icing environment in the test facility. While the focus of this report is the testing of air data probes, techniques described may be applicable to Appendix D tests of other aerospace equipment as well.

A review of icing materials that would be educational to a designer of a UAV ice protection system is provided. Additionally, the differences between unmanned and manned ice protection systems are explored along with a discussion on how these differences can be addressed.

Aircraft-mounted Closed Circuit Refueling receiver adapter – Definition of standard interface dimensions for adapter which interfaces with MIL-PRF-52747F Nozzle.

The new standard will establish minimum performance requirements for angle of attack (AOA) and angle of sideslip (AOS) sensors in ice and rain conditions. The new standard will cover the various sensor technologies used to measure these flow angles and is limited to the sensor itself as defined from the portion of the sensor that is directly exposed to the ice and rain environment to the means by which its output is relayed to the relevant aircraft systems. The user of this standard must evaluate the aircraft level installation requirements for the probe to ensure adequate coverage for the application. It may be necessary to modify the test conditions in order to meet the applicable installation requirements.

Develop an AS for the minimum performance requirements for tracking devices that are utilized to track the location and other environmental conditions of a piece of equipment that will be transported on-board an aircraft, .i.e ULD, TCC, FRC. The AS will define test requirements or regulation that a device will need to meet to demonstrate no impact to its use on-board an aircraft operation and its crew. The goal would be to request a TSO be developed based on this new standard.

This SAE Aerospace Recommended Practice (ARP) provides guidance for the verification and certification of a “commercial” fixed wing aircraft fuel tank inerting system (FTIS) and will provide technical references and data regarding ground and flight testing of an FTIS. The intent of this ARP is to address issues associated with the verification requirements based on current regulatory guidance per AC25.981-2C

The document provides a definition of skew and disconnect occuring in high lift systems in flight controls including their hazard assessment, describes generic solutions and provides a for specifying requirements.

Scope: This Aerospace Recommended Practice (ARP) provides guidelines for specifying dielectric withstanding strength and insulation resistance design and test requirements for aircraft line replaceable units (LRU's) used within a flight control and/or a utility system. 1.1 Purpose The testing is intended to verify that an LRU can operate safely at its rated voltage and withstand momentary over potentials due to switching, troubleshooting testing, surges, etc.. The testing is also intended to verify adequate design margin of the insulation system and detect workmanship problems.

Develop an Aerospace Recommended Practice that describes means of certification compliance for approval of passive rotorcraft engine/APU induction system ice protection (inadvertent and full icing).

The SAE E-32 Committee is requested to develop standards for Commercial Aircraft Engine Monitoring to support the Continued Airworthiness of aircraft in general, with particular emphasis on the ETOPS (Extended Operations) to support the regulations. 14CFR A33.3 (c) ETOPS Requirements. For an applicant seeking eligibility for an engine to be installed on an airplane approved for ETOPS, the Instructions for Continued Airworthiness must include procedures for engine condition monitoring. The engine condition monitoring procedures must be able to determine prior to flight, whether an engine is capable of providing, within approved engine operating limits, maximum continuous power or thrust, bleed air, and power extraction required for a relevant engine inoperative diversion. For an engine to be installed on a two-engine airplane approved for ETOPS, the engine condition monitoring procedures must be validated before ETOPS eligibility is granted.

The ARP shall cover the objectives and activities of Verification & Vallidation Processes required to assure high quality and/or criticality level of an IVHM Systems and Software.