Search Results

This specification covers established metric manufacturing tolerances applicable to aluminum alloy drawn tubing ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range.

This specification covers established metric manufacturing tolerances applicable to aluminum alloy drawn tubing ordered to metric dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range.

The Manufacturing Message Specification is an application layer Standard designed to support messaging communications to and from programmable devices in a Computer Integrated Manufacturing (CIM) environment. This environment is referred to in this Standard as the manufacturing environment. This Standard does not specify a complete set of services for remote programming of devices, although provision of such a set of services may be the subject of future standardization efforts.

This SAE Aerospace Information Report (AIR) describes procedures, required continuous sampling conditions, and instrumentation for the measurement of non-volatile particle number and mass concentrations from the exhaust of aircraft gas turbine engines. Procedures are included to calculate sampling loss performance. This AIR is not intended for in-flight testing, nor does it apply to engine operating in the afterburning mode.

This document establishes the minimum criteria for effective training of air carrier and contractor personnel to deice/anti-ice aircraft to ensure the safe operation of aircraft during ground icing conditions. Appendix D specifies guidelines for particular airplane models.

Documents, standardizes and improves existing In-line, Elbow, and Tee Flanged Connectors for use with SAE J518-2/ISO6162-2 Components.

This Recommended Practice proposes test practices to evaluate the Water Leak Tightness of Propulsion Battery Packs that emulates the equivalent results of IEC 60529 to an IPX7 level applying the Selected Equivalent Channel (EC) per SAE J3277 and provide guidelines for proper tooling design, validation, and leak test procedure. This practice is in consideration of the design limitation of some battery packs while utilizing applicable common air or tracer gas leak tightness technologies.

This document describes the megawatt-level DC charging system requirements for couplers/inlets, cables, cooling, communication and interoperability. The intended application is for commercial vehicles with larger battery packs requiring higher charging rates for moderate dwell time. A simplified analog safety signaling approach is used for connection-detection to guarantee de-energized state for unmated couplers with superimposed high speed data for EVSE-EV charging control and other value added services.

SAE J#### establishes the protocol and process limits for hydrogen fueling of light duty vehicles when the fuel delivery temperature is not pre-cooled, so called “ambient fueling” designated by Table 1 of SAE J2601-2014. These process limits (including the fuel delivery temperature, the maximum fuel flow rate, the rate of pressure increase and the ending pressure) are affected by factors such as ambient temperature, fuel delivery temperature and initial pressure in the vehicle’s compressed hydrogen storage system. SAE J#### establishes standard fueling protocols based on a series of design cases representing fueling system engineering categories. These categories are intended to provide performance targets which allow decreasing fueling times relative to the most simple design case. Similar to the table and formula based approaches of SAE J2601-2014, this approach establishes a minimum performance criteria leaving open options for innovation to decrease fueling times.

Develop and document an aerodynamic constant speed procedure for heavy vehicles that can accurately calculate the aerodynamic performance through the typical expected yaw angles during operation at highway speeds.

This SAE RP provides a set of test methods and practices for the characterization of the properties of lithium battery anode active materials. Lithium battery anode active materials can be grouped in one of the following categories: lithium intercalation materials (including graphite, Li4Ti5O12); lithium alloying materials (including Sn, Si compounds/composites); lithium deposition materials (lithium metal). For the purposes of this document, material properties will be examined for particulate anode active materials (graphite, Li4TiO5, Sn compounds, Si compounds) and for metallic films (lithium metal). It is not within the scope of this document to establish criteria for the test results, as this is usually established between the vendor and customer It is not within the scope of this document to examine the electrochemical properties of anode materials since these are influenced by electrode design.

The scope of this document is to provide a guidance of the common contamination types and their concentrations in order to size FTIS components and characterize its performance on generic commercial aircraft.

Over the past several years the FZG A/8.3/90 test method has been used to evaluate current qualified aviation lubricants. The results of the effort have been summarized in this document as a historical reference to document the findings made from the committee.

The purpose of this AIR is to provide a comprehensive description document that displays various examples of low pressure seals and wipers utilized within mechanical and electromechanical actuators. The document is intended as an overview for those specifying or designing actuators in order to compare existing solutions as reference for implementation.

This SAE Aerospace Information Report (AIR) provides technical information regarding Engine Control Systems Interdependencies strategies and/or functions. This concerns aircraft with multiple power sources: at least two engines, whatever the nature of the power source is (electrical motor or gas turbine engine). Within this document the aircraft stands for fixed-wing aircraft as well as rotorcraft. The term EECS or FADEC is used for the engine electronic control system, whereas the term EEC is used for the electronic unit itself. The scope includes civilian aircraft powered by turbofan, turboprop, turboshaft and electrical engines equipped with electronic engine controls. Military aircraft is taken into consideration, however restricted topics that change the operational behaviors are not discussed.

This document defines the technical guidelines for the safe integration, operation and maintenance, and for certification of Liquid Hydrogen Storage Systems (LHSS) in aircraft. This document also defines guidelines for safe refuelling operation of hydrogen for aircraft. This document does not address airport infrastructure, nor how the refuelling means is specified, except the provisions required for the safety of the aircraft refuelling operation.

Aircraft-mounted Closed Circuit Refueling receiver adapter – Definition of standard interface dimensions for adapter which interfaces with MIL-PRF-52747F Nozzle.

This document defines the technical guidelines for the safe integration, operation and maintenance, and for certification of Gaseous Hydrogen Storage Systems (GHSS) in general aviation. This document also defines guidelines for safe refuelling operation of gaseous hydrogen for aircraft. This document does not address airport infrastructure, nor how the refuelling means is specified, except the provisions required for the safety of the aircraft refuelling operation.

The E-36 committee is requested to develop a standard or recommended practice for Control System Fault Accommodation to provide guidance on the fault detection and accommodation strategies and robust validation toward certification to FAA Control System regulation 33.28. FAA has written an issue paper on this outlining the risks and vulnerabilities in fault detection/ accommodation based on industry/agency experience over many years; and suggested means of compliance in terms of tests, analyses, simulations. The E-36 is requested to factor in the issue paper and build on the guidance content into an SAE document for reference by the industry. In this endeavor, it is recommended that the SAE standard/ARP consider conventional gas turbine controls as well as emerging architectures such Hybrid and Electric Propulsion Systems.