Search Results

The maintenance of the cabin atmosphere aboard spacecraft is critical not only to its habitability but also to its function. Ideally, air quality can be maintained by striking a proper balance between the generation and removal of contaminants. Both very dynamic processes, the balance between generation and removal can be difficult to maintain and control because the state of the cabin atmosphere is in constant evolution responding to different perturbations. Typically, maintaining a clean cabin environment on board crewed spacecraft and space habitats is a central function of the environmental control and life support (ECLS) system. While active air quality control equipment is deployed on board every vehicle to remove carbon dioxide, water vapor, and trace chemical components from the cabin atmosphere, perturbations associated with logistics, vehicle construction and maintenance, and ECLS system configuration influence the resulting cabin atmospheric quality.

As the duration of space missions increases, the importance of astronaut health monitoring systems increases. Health monitoring during extra-vehicular activity is especially crucial because it is among the most physically demanding phases of space flight With the existing space suit bioinstrumentation system nearing completion of its third decade of service, it is time to consider developing the next generation of bioinstrumentation systems, building on the lessons of the past while incorporating updated technology.

Contaminated air and process gases, whether in a crewed spacecraft cabin atmosphere, the working volume of a microgravity science or ground-based laboratory experiment facility, or the exhaust from an automobile, are pervasive problems that ultimately effect human health, performance, and well-being. The need for highly-effective, economical decontamination processes spans a wide range of terrestrial and space flight applications. Adsorption processes are used widely for process gas decontamination. Most industrial packed bed adsorption processes use activated carbon because it is cheap and highly effective. Once saturated, however, the adsorbent is a concentrated source of contaminants. Industrial applications either dump or regenerate the activated carbon. Regeneration may be accomplished in-situ or at an off-site location. In either case, concentrated contaminated waste streams must be handled appropriately to minimize environmental impact.

The baseline environmental control and life support (ECLS) systems currently deployed on board the International Space Station (ISS) and that planned to be launched in Node 3 are based upon technologies selected in the early 1990's. While they are generally meeting or exceeding requirements for supporting the ISS crew, lessons learned from years of on orbit and ground testing, together with new advances in technology state of the art, and the unique requirements for future manned missions prompt consideration of the next logical step to enhance these systems to increase performance, robustness, and reliability, and reduce on-orbit and logistical resource requirements. This paper discusses the current state of the art in ISS ECLS system technologies, and identifies possible areas for enhancement and improvement.

The factors affecting noise from small propeller driven airplanes are reviewed to quantify their affects where possible, and to indicate the potential for noise reduction. The main sources of external noise are noted to be the propellers and engines; the airframe being of less importance for both aural detection and community annoyance. Propeller noise is a strong function of tip speed and is affected adversely by non-uniform inflows. Reciprocating engine exhausts are noisier than those of comparably rated turboshaft engines, but their noise can be reduced by the use of flight certified exhaust mufflers. Presently, there are no generally accepted engineering methods for development of optimized propellers and exhaust muffler designs from weight and performance penalty standpoints. Flight demonstration results, however, suggest that required noise reductions for future certification should be possible with potentially small penalties.

The purpose of the Refan Program is to establish the technical feasibility of substantially reducing the noise levels of existing JT8D powered aircraft. This would be accomplished by retrofitting the existing fleet with quieter refan engines and new acoustically treated nacelles. No major technical problems exist that preclude the development and installation of refanned engines on aircraft currently powered by the JT8D engine. The refan concept is technically feasible and provides calculated noise reductions of from 7 to 8 EPNdB for the B727-200 aircraft and from 10 to 12 EPNdB for the DC-9-32 aircraft at the FAR Part 36 measuring stations. These noise levels are lower than both the FAR Part 36 noise standards and the noise levels of the wide-body DC-10-10. Corresponding reductions in the 90 EPNdB footprint area are estimated to vary from about 70% for the DC-9 to about 80% for the B727.