Search Results

Electric, Fuel Cell and Hybrid vehicles may contain many types of high voltage systems. Adequate barriers between occupants and the high voltage systems are necessary to provide protection from potentially harmful electric current and materials within the high voltage system that can cause injury to occupants of the vehicle during and after a crash. This SAE Recommended Practice is applicable to Electric, Fuel Cell and Hybrid vehicle designs that are comprised of at least one vehicle propulsion voltage bus with a nominal operating voltage greater than 60 and less than 1,500 VDC, or greater than 30 and less than 1,000 VAC. This Recommended Practice addresses post-crash electrical safety, retention of electrical propulsion components and electrolyte spillage.

Electric, Fuel Cell and Hybrid vehicles may contain many types of high voltage systems. Adequate barriers between occupants and the high voltage systems are necessary to provide protection from potentially harmful electric current and materials within the high voltage system that can cause injury to occupants of the vehicle during a crash. This SAE Recommended Practice is applicable to all Electric, Fuel Cell and Hybrid vehicle designs that are comprised of at least one voltage bus with a nominal voltage greater than or equal to 60 Volts DC or 30 VAC. This Recommended Practice addresses electrical isolation integrity, electrolyte spillage, and retention of the battery system.

This recommended practice is intended to serve as a procedure to verify the functional performance, design specifications or vendor claims of any PEM (Proton Exchange Membrane) type fuel cell stack sub-system for automotive applications. In this document, definitions, specifications, and methods for the functional performance characterization of the fuel cell stack sub-system are provided. The functional performance characterization includes evaluating electrical outputs and controlling fluid inputs and outputs based on the test boundary defined in this document. In this document, a fuel cell stack sub-system is defined to include the following: Fuel cell stack(s) – An assembly of membrane electrode assemblies (MEA), current collectors, separator plates, cooling plates, manifolds, and a supporting structure. Connections for conducting fuels, oxidants, cooling media, inert gases and exhausts. Electrical connections for the power delivered by the stack sub-system.

This recommended practice is intended to serve as a design verification procedure and not a product qualification procedure. It may be used to verify design specifications or vendor claims. Test procedures, methods and definitions for the performance of the fuel processor subsystem (FPS) of a fuel cell system (FCS) are provided. Fuel processor subsystems (FPS) include all components required in the conversion of input fuel and oxidizer into a hydrogen-rich product gas stream suitable for use in fuel cells. Performance of the fuel processor subsystem includes evaluating system energy inputs and useful outputs to determine fuel conversion efficiency and where applicable the overall thermal effectiveness. Each of these performance characterizations will be determined to an uncertainty of less than ± 2% of the value. The method allows for the evaluation of fuel processor subsystems for two general cases.

This recommended practice is intended to serve as a procedure to verify the functional performance, design specifications or vendor claims of any PEM (Proton Exchange Membrane) type fuel cell stack sub-system for automotive applications. In this document, definitions, specifications, and methods for the functional performance characterization of the fuel cell stack sub-system are provided. The functional performance characterization includes evaluating electrical outputs and controlling fluid inputs and outputs based on the test boundary defined in this document. In this document, a fuel cell stack sub-system is defined to include the following: Fuel cell stack(s) – An assembly of membrane electrode assemblies (MEA), current collectors, separator plates, cooling plates, manifolds, and a supporting structure. Connections for conducting fuels, oxidants, cooling media, inert gases and exhausts. Electrical connections for the power delivered by the stack sub-system.

This recommended practice is intended to serve as a design verification procedure and not a product qualification procedure. It may be used to verify design specifications or vendor claims. Test procedures, methods and definitions for the performance of the fuel processor subsystem (FPS) of a fuel cell system (FCS) are provided. Fuel processor subsystems (FPS) include all components required in the conversion of input fuel and oxidizer into a hydrogen-rich product gas stream suitable for use in fuel cells. Performance of the fuel processor subsystem includes evaluating system energy inputs and useful outputs to determine fuel conversion efficiency and where applicable the overall thermal effectiveness. Each of these performance characterizations will be determined to an uncertainty of less than ± 2% of the value. The method allows for the evaluation of fuel processor subsystems for two general cases.

This recommended practice is intended to provide a framework for performance testing of fuel cell systems (FCS’s) designed for automotive applications with direct current (DC) output. The procedures described allow for measurement of performance relative to claims by manufacturers of such systems with regard to the following performance criteria. — Power — Efficiency — Transient Response — Start and Stop Performance — Physical Description — Environmental Limits — Operational Requirements — Integration Since this recommended practice is based on the principal of performance measurement relative to a claim, the testing parties should take care to include any qualifying or unique circumstances leading to the test results reported in order to achieve full disclosure. For example, efficiency as defined in section 3.1.9 allows for the inclusion of thermal output benefit.

This recommended practice is intended to provide a framework for performance testing of fuel cell systems (FCS’s) designed for automotive applications with direct current (DC) output. The procedures described allow for measurement of performance relative to claims by manufacturers of such systems with regard to the following performance criteria. — Power — Efficiency — Transient Response — Start and Stop Performance — Physical Description — Environmental Limits — Operational Requirements — Integration Since this recommended practice is based on the principal of performance measurement relative to a claim, the testing parties should take care to include any qualifying or unique circumstances leading to the test results reported in order to achieve full disclosure. For example, efficiency as defined in section 3.1.9 allows for the inclusion of thermal output benefit.

This Information Report provides interim background information and an interim specification of hydrogen fuel quality for commercial proton exchange membrane (PEM) fuel cell vehicles. This Report also provides background information on how this interim specification was developed by the Hydrogen Quality Task Force (HQTF) of the Interface Working Group (IWG) of the SAE Fuel Cell Standards Committee. The constituents and thresholds listed in Table 1 are based on a survey of the industry, the published literature and reflects current and draft analytical test methods. Some of the allowable constituent levels are higher than desired because a published detection method is not available for the desired threshold. Some of the allowable constituent levels may be lower than desired due to incomplete evaluations and/or an attempt to minimize testing costs (such as including methane in total hydrocarbons).