Search Results

Main topics are the development and the build-up of an 18ton hybrid truck with a parallel hybrid drivetrain. With this truck it is possible to drive up to 3 kilometers in the pure electric driving mode. Presenter Andreas Eglseer, Engineering Center Steyr GmbH & Co. KG

The automotive industry continues to develop new powertrain technologies aimed at reducing overall vehicle level fuel consumption. This paper discusses the development of a new highly efficient parallel hybrid transmission for use in transversely installed powertrains for FWD applications. FEV is developing a new 7-speed hybrid transmission for transverse installation. The transmission with a design torque of 320 Nm is based on AMT (automated manual transmission) technology and uses a single electric motor. The innovative gearset layout combines the advantages of modern AMTs such as best efficiency, low costs and few components (reduced part count) with full hybrid capabilities and electric torque support during all gear shifts. Furthermore, the gear set layout allows for very short shift-times due to the favorable distribution of inertias. Other features include an A/C compressor being electrically driven by the electric motor of the transmission during engine start/stop phases.

Automakers, suppliers, public agencies, interest groups and others are increasingly embracing the environment as one of the dominant forces in the US automotive market. All parties have a strong vested interest in understanding how environmental concerns will influence design, production, marketing and usage of tomorrow�s vehicles. A common need of all parties is independent and actionable information to enable them to make better decisions and have the greatest chance of being successful in this uncertain future. Four factors - an uncertain economic climate; a constantly changing governmental regulatory system; advancements in powertrain technology; and ever-present environmental concerns - continue to shape the automotive landscape. While automakers are focused on developing alternative powertrains and alternative fuel options for an increasingly �green� vehicle market, J.D.

In this project funded by the Bayerische Forschungsstiftung two fundamental investigations had been carried out: first a new N-rich liquid ammonia precursor solution based on guanidine salts had been completely characterized and secondly a new type of side-flow reactor for the controlled catalytic decomposition of aqueous NH3 precursor to ammonia gas has been designed, applied and tested in a 3 liter passenger car diesel engine. Guanidine salts came into the focus due to the fact of a high nitrogen-content derivate of urea (figure 1). Specially guanidinium formate has shown extraordinary solubility in water (more than 6 kg per 1 liter water at room temperature) and therefore a possible high ammonia potential per liter solution compared to the classical 32.5% aqueous urea solution (AUS32) standardized in ISO 22241 and known as DEF (diesel emission fluid), ARLA32 or AdBlue®. Additionally a guanidine based formulation could be realized with high freezing stability down to almost ?30 °C (?

Abstract To reduce fuel consumption and carbon dioxide (CO2) emissions from mobile air conditioning (A/C) systems, “U.S. Light-Duty Vehicle Greenhouse Gas Emissions and Corporate Average Fuel Economy Standards” identified solar/thermal technologies such as solar control glazings, solar reflective paint, and active and passive cabin ventilation in an off-cycle credit menu. National Renewable Energy Laboratory (NREL) researchers developed a sophisticated analysis process to calculate U.S. light-duty A/C fuel use that was used to assess the impact of these technologies, leveraging thermal and vehicle simulation analysis tools developed under previous U.S. Department of Energy projects. Representative U.S. light-duty driving behaviors and weighting factors including time-of-day of travel, trip duration, and time between trips were characterized and integrated into the analysis.

Abstract In this study, a multi-parameter analysis, using Taguchi method for design of experiments, has been conducted to investigate the optimum curing conditions for E-glass fabric/epoxy laminated composites. The independent variables in the L25 Taguchi orthogonal array were heating rate a, curing temperature TC and curing time tC, including five levels each. Tensile and 3-point bending tests were performed for each experiment number (run number) of the Taguchi L25. In this study, the significant factors for both tensile and flexural performance were temperature and time at 95% confidence level. Specifically, the tensile performance was affected almost equally by both curing temperature and time (32.71% and 35.89%, respectively). The flexural performance was mostly affected by curing temperature (44.02%) and secondarily by curing time (31.52%).

Abstract The use of Abrasive Water Jet (AWJ) cutting technology can improve the edge stretchability in sheet metal forming. The advances in technology have allowed significant increases in working speeds and pressures, reducing the AWJ operation cost. The main objective of this work was to determine the effect of selected AWJ cutting parameters on the Hole Expansion Ratio (HER) for a DP800 (Dual-Phase) Advanced High-Strength Steel (AHSS) with s0 = 1.2 mm by using a fractional factorial design of experiments for the Hole Expansion Tests (HET). Additionally, the surface roughness and residual stresses were measured on the holes looking for a possible relation between them and the measured HER. A deep drawing quality steel DC06 with s0 = 1.0 mm was used for reference. The fracture occurrence was captured by high-speed cameras and by Acoustic Emissions (AE) in order to compare both methods.

The SAE Aerospace Information Report (AIR) is intended to be used as a process verification guide for evaluating implementation of key factors in bonded repair of fiber reinforced composite structure in a repair shop environment. The guide will be used in conjunction with a regulatory approved and substantiated repair, and is intended to promote consistency and reliability.

This guidebook will assist in the design and integration of composite commercial aircraft structures that exhibit improved durability, maintainability and repairability. For international use by composite aircraft component designers, this book identifies problems that have occurred with various composite components and provides potential problem-solving recommendations. Written primarily for composite design engineers, Design of Durable, Repairable, and Maintainable Aircraft Composites should also prove valuable to those in structural engineering, materials and processing, product support, advanced product development, systems engineering, technical services, and maintenance operations.

SAE CACRC has produced several standards, each representing the best-practice, recommended minimum training syllabus for the aforementioned target groups. The purpose of this document is to promote the use of these SAE standards, particularly for developing training programs for employee training, qualification in airlines and maintenance organizations, and as reference in regulatory guidance material. It summarizes, as a quick reference, the content of each training document and its relation to and interaction with other training documents. Thereby it allows users to select the appropriate training documents and syllabi to establish a comprehensive, sequential training program build-up customized to the specific needs of the aforementioned functions (see figure). This document does not intend to introduce new training content/syllabus.

To create Guidance on the essential information/data that is needed to correctly assess damage and document the damage. A guidance document is proposed as the initial step in which it is documented what essential information is required for a composite repair with the aim to reduce to number of back and forward communications, improve the documents to define damage such as mapping, damage descriptions, sketches, pictures. CACRC Procedures Task Group will be drafting the document.

Increased use of advanced composite structural materials on aircraft has resulted in the need to address the more demanding quality and non-destructive testing procedures. Accordingly, increased utilization of solid laminate composites is driving changes to airline NDT training requirements and greater emphasis on the application of accurate NDT methods. Modules, including an introduction to composite materials, composite NDI theory and practice, special cases and lessons learned, have been produced in addition to various hands-on NDT exercises. A set of proficiency specimens containing realistic composite structures and representative damage has been designed in order to reinforce teaching points of the course and “test” inspector’s proficiency. Extensive details of the course modules, hand-on exercises and the proficiency specimens are all presented in this report.

This document is intended to provide guidance towards setting up a composite repair workshop facility

Detail specification for T700S-12K-50C/#2511 Plain Weave Fabric

The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness.

The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness.

The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness. This is the base specification and it will have three slash/detail specs.

The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. These materials are designed specifically for vacuum bag autoclave cure. These materials are intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness. This is the base specification and it will have two slash/detail specs.

The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. These materials are designed specifically for vacuum bag autoclave cure. These materials are intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness.

The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. These materials are designed specifically for vacuum bag autoclave cure. These materials are intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness.