Search Results

The intensifying demand of cleaner fuelled vehicles considering current norms of BSIV and upcoming stringent norms of BSVI with low cost solutions has promoted the development of CNG and dual fuel vehicles. CNG vehicle is anticipated to discover its extensive use for environment fortification and effective deployment of energy capitals. Thus, CNG vehicles can be pretty effective in averting environment deterioration. CNG has low carbon to hydrogen ratio, this leads to very low CO2 emissions compared to gasoline and diesel vehicles. CNG engines have the potential of low NOx and particulate emissions. Natural gas vehicle development has been directed on the way to current use of direct injection and port injection with S.I. engines. Generally for low cost development, all OEMs prefer optimization of existing engines. Similarly for this project, a diesel engine was converted to S.I. engine for development of low emission CNG engine.

Air Pollution is a major concern in our country due to which Indian Government has taken a decision to move from BS-IV to BS-VI which is nearly 90% reduction in NOx and 50% in particulate matter along with addition of particulate number regulation for BS-VI in comparison to BS-IV norms in very short span of time. Vehicle manufacturers are also having the challenge to produce low cost and fuel efficient product with BS-VI solution in order to meet tightening emission regulations and increasing needs of lower fuel consumption. Detailed study is done with different approaches to meet BS-VI emission which is elaborately explained in different aspect of engine design and after treatment parameter with its pros and cons. After Treatment selection plays an important role in engine development to meet stringent emission legislations and customer demands. Strategies for BS-VI were described with the advantage and drawbacks for after treatment selection.

Engine down speeding is rapidly picking up momentum in many segment of world market. Numerous engine down speeding packages from OEM have been tailored to take advantage of the increased efficiencies associated with engine down speeding. Running engine at lower rpm has numerous advantages. The most obvious of these is reduced fuel consumption, since the engine can spend more time running within its optimum efficiency range. By down speeding, the engine is made to run at low speeds and with high torques. For the same power, the engine is operated at higher specific load- Brake Mean Effective pressure (BMEP) which results in higher efficiency and reduced fuel consumption-Brake Specific Fuel Consumption (BSFC). The reasons for increased fuel efficiency are reduced engine friction due to low piston speeds, reduced relative heat transfer and increased thermodynamic efficiency.

Increased options and flexibility in common rail direct injection provides a great opportunity for combustion optimization using fuel and air system with proper combustion chamber configuration. This paper elaborates the experimental work conducted for combustion optimization with combinations of piston bowl, intake port swirl, injector specifications and turbo charging on a 3.8 l four valve diesel engine of LDT application equipped with common rail fuel injection system and waste gate turbo charge. In meeting the target emission norms with internal engine measures, the design of the piston bowl and the nozzle configuration perform a defining role. Through simulations the best option had been carried out parametrically investigate the influence of piston bowl geometry and nozzle characteristics on the performance of the combustion system.

The demand for reduced pollutant emissions has motivated various technological advances in commercial diesel engines. The challenge for the direct injection diesel engines today is to reduce harmful emissions of diesel engines, such as Particulate Matter (PM) and Nitrogen oxides (NOx), and enhance the fuel efficiency and power. To meet this challenge, more accurate control of injection parameters such as the injection timing, injection rate, and injection quantity is required. A comprehensive study is carried out in order to better understand combustion behavior in a direct injection diesel engine working under different injection strategies particularly with post and pre-injections and number of injection. The objective of the study described in this paper is to explore the potential of multiple injection patterns with a common rail system in light duty diesel engines.

Diesel exhaust is a complex mixture of combustion products of diesel fuel, and the exact composition of the mixture depends on the nature of the engine, operating conditions, lubricating oil, additives, emission control system, combustion parameters and fuel composition. In a diesel engine, NOx (NO & NO2) and PM (Particulate Matter) are the most critical constituents for the emission legislation. In order to control the PM emission of diesel engine and comply with increasingly stringent exhaust legislation, more information is required on the components and genesis of PM. In general, PM from diesel engines is classified into two fractions: Insoluble Organic Fraction (ISOF) and Soluble Organic Fraction (SOF). In this experimental study, a series of 13 mode ESC cycle were run on a light duty diesel engine after optimization of combustion parameters (Injection Pressure, Injection Timing, Multiple Injections, EGR rate, etc) in successive tests and PM component was analyzed.

Diesel engines are facing stringent norms and future survival with its lower availability is one of the biggest concerns for OEMs of heavy duty commercial vehicles. This is leading to uplifting of new, latent and innovative techniques to achieve these norms with best possible BSFC to reduce overall diesel consumption. The prime objective of this study is to identify and explore the latent strength of pre and post injection on engine performance, emissions and oil dilution due to soot. The post injection strategy has the potential to reduce soot with almost same NOx and fuel consumption depending on the delay of post injection and its quantity. It aids to increase the engine out temperatures for assistance of after-treatment devices, thus meeting higher temperature requirements for NOx and PM conversion for stringent norms of BSVI.

Direct injection compression ignition engines have proved to be the best option in light duty applications but rapid depleting sources of conventional fossil fuels, their rising prices and ever increasing environmental issues are the major concerns. Alternate fuels, particularly bio fuels are receiving increasing attention during the last few years. Biodiesel has already been commercialized in the transport sector. In the present work, a turbocharged, intercooled, DI diesel engine has been alternatively fuelled with biodiesel and its 20% blend with commercial diesel. The effect of biodiesel addition to diesel on engine performance, combustion, and emissions were studied in a turbocharged, high-pressure common rail diesel engine. Biodiesel/diesel blends with different biodiesel fractions were used and compared with neat biodiesel and diesel at different engine loads and speeds.

In meeting the stringent emission norms the injector selection plays a vital role. Selection of optimum injection parameters helps in achieving good spray targeting and efficient atomization of fuel to generate optimum mixing effect. The purpose of this experimental study is to investigate the effect of injection parameters on a heavy duty diesel engine performance and emission characteristics. The injection parameters such as hydraulic through flow, cone angle, number of holes & hole diameter are studied on 6-cylinder turbocharged common rail diesel engine (BS-IV). The influence of these parameters and their combinations along with the various injection strategies are analyzed using different parametric variations in order to see the combustion and performance trend of engine. The performance of the various hardware configurations are then evaluated and discussed based on the fuel consumption and exhaust emission values.

For the upcoming norms of BSVI, it is very important to keep the balance of emission and fuel economy. In these paper different concepts for exhaust gas temperature management will be analyzed and compared. In transient and steady conditions with medium and low load, the effects of active control strategies on exhaust thermal management were studied at the test bench, which include E waste gate intake throttle valve opening, injection advance angle, injection pressure and post injection. The comparison study was factors impacting the fuel economy and temperature management along with to meet WHSC & WHTC emission. The DOE was done to understand the best suitable match with the above function to achieve the optimized fuel economy and BSVI legislative requirement. Different test where carried with 0-100% of opening of intake throttle valve, E waste full open and late post injection to understand the thermal management of engine in part and full load.

Selective Catalytic Reduction has established itself to significantly reduce NOx emissions from diesel engines. Typically, in this technology, aqueous urea solution is injected into hot exhaust stream which chemically decomposes to form ammonia and then reacts with NOx to form safe byproducts as H2O and N2 over the catalyst surface. However, incomplete thermal decomposition of urea not only reduces the NOx conversion efficiency and increases the ammonia slip, but also leads to the formation of solid crystals that adversely affect the performance of the system by increasing the back pressure and lowering the overall fuel economy. The present study discusses about the main reasons that lead to crystal formation in a vanadium based SCR system on a six cylinder 5.6l diesel engine and also design considerations of decomposition tube that affect the formation of crystals and ways to mitigate them.