Search Results

Vehicle emissions have been measured and the results statistically evaluated for a vehicle test fleet consisting of four Escorts and four Explorers using both a fully formulated durability fuel doped with methylcyclopentadienyl manganese tricarbonyl (MMT) at 1/32 gram Mn/gallon and the same fully formulated durability fuel without the MMT. The fleet was divided in half -- half with MMT and half without MMT doped fuel. This report covers emission measurement results at 5,000; 15,000; 50,000 and 100,000 miles of exposure to MMT doped fuel. A modified paired t-test is used to analyze the emission data obtained from all the fleet vehicles. The statistical evaluation of both feedgas and tailpipe emissions indicate that the use of MMT is detrimental to emissions of HC at the 15,000 mile; 50,000 mile and 100,000 mile levels of MMT exposure. As mileage is accumulated, the pronounced the effect on HC by the fuel additive MMT.

Engine dynamometer and laboratory flow reactor studies of automotive catalyst deactivation caused by the use of leaded fuel indicate that there are two different deactivation mechanisms: one, which dominates between 700 and 800 C, is the poisoning of the active platinum sites by lead oxide, or perhaps lead, and the other, which occurs below 550 C, is a build up of a gas diffusion barrier of lead sulfate. Both deactivation mechanisms can be temporarily reversed. Poisoning is reversed when the platinum is freed of lead oxide by lead sulfate formation below 650 C; and the barrier formed below 550 C can be made more permeable by thermal sintering of the lead sulfate at 600 to 700 C or its decomposition to lead oxide at 700 to 800 C. However, further exposure of the catalyst will again render it inactive via the mechanism predominating in that temperature region.