Search Results

An advanced powertrain cooling system with appropriate control strategy and active actuators allows greater flexibility in managing engine temperatures and operating near constraints. An organized controls development process is necessary to allow comparison of multiple configurations to select the best way forward. In this work, we formulate, calibrate and validate a Model Predictive Controller (MPC) for temperature regulation and constraint handling in an advanced cooling system. A model-based development process was followed; where the system model was used to develop and calibrate a gain scheduled linear MPC. The implementation of MPC for continuous systems and the modification related to implementing switching systems has been described. Multiple hardware configurations were compared with their corresponding control system in simulations. The system level requirements were translated into MPC calibration parameters for consistent comparison between multiple configurations.

On downsized turbocharged engines, turbo speed is correlated with maximum engine airflow and therefore with maximum engine power. To ensure safe operation in the field, auto makers introduce significant engineering margins to the turbocharger maximum speed limit. Physical turbo speed sensors provide one way to reduce this engineering margin, but are not appropriate for some applications. An accurate mathematical estimation of turbocharger speed using virtual sensor can help reduce these margins, therefore increasing available power. This paper examines the best turbo speed estimation accuracy that can be achieved using a given set of production engine sensors. “Best” is defined in a minimax sense as the smallest turbo speed error interval achievable assuming the worst case combination of sensor and actuator errors and plant parameter mismatch.

Many control approaches for selective catalytic reduction (SCR) systems require knowledge of ammonia storage (NH3 storage) to dose urea accurately. Currently there are no technologies to directly measure internal NH3 storage in a vehicle, so it can only be inferred from hardware sensors located upstream, downstream, or in the catalyst. This paper describes an application of extended Kalman filter (EKF) state estimator used as a virtual sensor for urea injection control of a multi-brick aftertreatment system. The proposed estimator combines mean-value physics-based models of combined SCR and diesel particulate filter (SCR/DPF), SCR and clean-up catalyst (CUC). It uses hardware sensors at the inlet and outlet of the aftertreatment system, and includes no sensors between the catalysts. Performance of the proposed estimator was validated in simulations against a high-fidelity model of the aftertreatment system.

In this paper we consider the issues facing the design of a practical multivariable controller for a diesel engine with dual exhaust gas recirculation (EGR) loops. This engine architecture requires the control of two EGR valves (high pressure and low pressure), an exhaust throttle (ET) and a variable geometry turbocharger (VGT). A systematic approach suitable for production-intent air handling control using Model Predictive Control (MPC) for diesel engines is proposed. Furthermore, the tuning process of the proposed design is outlined. Experimental results for the performance of the proposed design are implemented on a 2.8L light duty diesel engine. Transient data over an LA-4 cycle for the closed loop performance of the controller are included to prove the effectiveness of the proposed design process.

Numerous studies describe the fuel consumption benefits of changing the powertrain temperature based on vehicle operating conditions. Actuators such as electric water pumps and active thermostats now provide more flexibility to change powertrain operating temperature than traditional mechanical-only systems did. Various control strategies have been proposed for powertrain temperature set-point regulation. A characteristic of powertrain thermal management systems is that the operating conditions (speed, load etc) change continuously to meet the driver demand and in most cases, the optimal conditions lie on the edge of the constraint envelope. Control strategies for set-point regulation which rely purely on feedback for disturbance rejection, without knowledge of future disturbances, might not provide the full fuel consumption benefits due to the slow thermal inertia of the system.

Over the past few years, innovative engine layouts have enabled significant reductions in both fuel consumption and pollutant emissions. However, exponential growth of powertrain control strategies complexity has inevitably accompanied these achievements. As a result, control and calibration development time and effort have become an ever-growing concern in powertrain design. An illustrative example of this complexity is Diesel Particulate Filters (DPF), which requires periodic regeneration to eliminate the accumulated soot. The main challenge for a DPF is to enhance the efficiency of these regeneration events, which depend largely on the quality of the regeneration temperature control. In this paper, we describe the DPF regeneration process, especially the main constraints and identification tests. We then give a simulation based comparison of two model based control solutions for the DPF thermal control during regeneration.

Turbocharger maps measured on a gas stand test bench are commonly used to represent turbine and compressor performance. The maps are useful source of information for mean value modeling, engine calibration optimization, virtual sensing and feedback control design. For some tasks, representing the maps by fitted functional forms can be more convenient than using interpolation of the map data directly. The functional representation usually allows for wider extrapolation ranges and more reliable application of numerical optimization methods. In literature most successful functional forms chosen to represent the compressor flow characteristics are based on rational polynomials of dimensionless head and flow parameters. Turbine flow characteristics, on the other hand, are commonly modeled as orifices or orifices with variable cross-section in case of variable geometry turbines (VGT).

Aluminum foil applied to the surface of sound absorbing materials has broad application in the automotive industry. A foil layer offers thermal insulation for components close to exhaust pipes, turbo chargers, and other heat sources in the engine compartment and underbody. It can also add physical protection for acoustic parts in water-splash or stone-impingement areas of the vehicle exterior. It is known that adding impermeable plain foil will impact the sound absorption negatively, so Microperforated Aluminum Foil (MPAF) is widely used to counteract this effect. Acoustic characteristics of MPAF can be modeled analytically, but deviation of perforation size and shape, variation of hole density, material compression, and adhesive applied to the back of the foil for the molding process can impact the acoustic and thermal insulation performance.

Increasingly strict CO2 and emissions norms are pushing the automotive industry towards increasing adoption of Hybrid Electric Vehicle (HEV) technology. HEVs are complex hardware systems which are often controlled by software that is complex to maintain, time-consuming to calibrate, and not always guaranteed to deliver optimal fuel economy. Hence, coordinated, systematic control of different subsystems of HEV is an attractive proposition. In this paper, Model Predictive Control (MPC) and Equivalent Consumption Minimization Strategy (ECMS) based supervisory controllers have been developed to coordinate the power split between the two prime movers of an HEV – internal combustion engine and electric motor. A dynamical physics based HEV model has been developed for simulation of the system behavior. A cost function has been formulated to improve fuel economy and battery life.

The paper examines how the issue of lengthy development times can be mitigated by adopting a multivariable physics based control method for the development and deployment of complex engine control algorithms required for modern diesel engines equipped with Lean NOx Trap aftertreatment technology. The proposed approach facilitates manufacturers to consider lower cost powertrain configurations for selected markets while maintaining higher performance configurations for other markets. The contribution includes on-engine results from joint work between General Motors and Honeywell. The Honeywell OnRAMP Design Suite which applies model predictive control techniques was used for model identification, control design (using model predictive control) and its calibration. With no prior work on the engine this process of calibrating an engine model and achieving transient drive cycle control on the engine required ten days in the test cell and five days of offline work using the OnRAMP software.

The interest for NOx estimators (also known as virtual sensors or inferential sensors) has increased over the recent years due to benefits attributed to cost and performance. NOx estimators are typically installed to improve On-Board Diagnostics (OBD) monitors or to lower bill of material costs by replacing physical NOx sensors. This paper presents initial development results of a virtual engine-out NOx estimator planned for the implementation on an ECM. The presented estimator consists of an airpath observer and a NOx combustion model. The role of the airpath observer is to provide input values for the NOx combustion model such as the states of the gas at the intake and exhaust manifolds. It contains a nonlinear mean-value model of the airpath suitably transformed for an efficient and robust implementation on an ECM. The airpath model uses available sensory information in the vehicle to correct predictions of the gas states.

The Exhaust Gas Recirculation (EGR) rate is a critical parameter of turbocharged diesel engines because it determines the trade-off between NOx and particulate matter (PM) emissions. On some heavy duty engines the EGR mass flow is directly measured with a Venturibased sensor and a closed loop control system maintains EGR flow. However, on most light duty diesel engines the EGR mass flow must be estimated. This paper compares two methods for estimating EGR mass flow. The first method, referred to as the Speed Density method, serves as a baseline for comparison and uses sensors for engine speed, intake manifold pressure and temperature, as well as fresh air flow (MAF). The new, second method adds turbo speed to this sensor set, and includes additional engine modelling equations, such as the EGR valve equation and the turbine equation. Special measures are taken to allow the additional equations to execute without issue on production ECMs (Electronics Controls Modules).

The paper provides an overview of a developed methodology and a toolchain for modeling and control of a complex aftertreatment system for passenger cars. The primary objective of this work is to show how the use of this methodology allows to streamline the development process and to reduce the development time thanks to a model based semi-automatic control design methodology combined with piece-wise optimal control. Major improvements in passenger car tailpipe NOx removal need to be achieved to fulfil the upcoming post EURO 6 norms and Real Driving Emissions (RDE) limits. Multi-brick systems employing combinations of multiple Selective Catalytic Reduction (SCR) catalysts with an Ammonia Oxidation Catalysts, known also as Ammonia Clean-Up Catalyst (CUC), are proposed to cover operation over a wide temperature range. However, control of multi-brick systems is complex due to lack of available sensors in the production configurations.

Control of vehicle powertrain thermal management systems is becoming more challenging as the number of components is growing, and as a result, advanced control methods are being investigated. Model predictive control (MPC) is particularly interesting in this application because it provides a suitable framework to manage actuator and temperature constraints, and can potentially leverage preview information if available in the future. In previous SAE publications (2015-01-0336 and 2016-01-0215), a robust MPC control formulation was proposed, and both simulation and powertrain thermal lab test results were provided. In this work, we discuss the controller deployment in a vehicle; where controller validation is done through road driving and on a wind tunnel chassis dynamometer. This paper discusses challenges of linear MPC implementation related to nonlinearities in this over-actuated thermal system.

The amount of ammonia stored on the walls of the catalyst (or ammonia storage) is a parameter with significant impact on NOx reduction efficiency and undesired ammonia slip of Selective Catalytic Reduction catalysts. This makes the ammonia storage interesting for utilization in urea injection control. However, ammonia storage is not directly measurable onboard vehicles, it can only be estimated. Model-based online estimation requires models that are capable of capturing the main phenomena of the SCR and at the same time can be computed onboard vehicle. While the modeling of SCR and model-based control is well present in the literature, it is apparent that few attempts of implementing the models on production ECUs were published. This paper reviews literature on ammonia storage, outlet NH3 and NOx concentration estimation in SCR and SCR/DPF systems-including the estimation of NOx sensor cross-sensitive to NH3-in order to present the state of the art.