Search Results

This paper reviews the development and application of a computer simulation for simulating ground vehicle dynamics including steady state tire behavior. The models have been developed over the last decade, and include treatment of sprung and unsprung masses, suspension characteristics and composite road plane tire forces. The models have been applied to single unit passenger cars, trucks and buses, and articulated tractor/trailer vehicles. The vehicle model uses composite parameters that are relatively easy to measure. The tire model responds to normal load, camber angle and composite tire patch slip, and its longitudinal and lateral forces interact with an equivalent friction ellipse formulation. The tire model can represent behavior on both paved and off-road surfaces. Tire model parameters can be automatically identified given tire force and moment test data.

Automatic and four wheel steering control laws are often developed from the performance point of view to optimize rapid response. Under linear tire operating conditions (i.e., maneuvering at less than .5g's) both performance and safety conditions can be simultaneously met. Under severe operating conditions, such as might be encountered during crash avoidance maneuvering, tire characteristics can change dramatically and induce directional dynamic instability and spinout. The challenge in automatic and four wheel steering system design is to achieve a compromise between performance and safety. This paper will describe analyses carried out with a validated vehicle dynamics computer simulation that shed some light on the vehicle and control characteristics that influence tradeoffs between performance and safety. The computer simulation has been validated against field test data from twelve vehicles including passenger cars, vans, pickup trucks and utility vehicles.

This paper describes validation work carried out for two vehicle dynamics computer simulation programs. One program, referred to as VDANL (Vehicle Dynamics Analysis NonLinear), is intended to simulate passenger cars, vans and light trucks. The second program simulates All Terrain Vehicles (ATVs) and is referred to as NLATV (NonLinear ATV). The programs have been checked out and validated for a variety of maneuvering conditions and a broad range of vehicles. The programs run on IBM-PC/MS DOS compatible computers, and numerical methods have been used to give numerically stable solutions with reasonable computational speed over a broad range of maneuvering situations.

Real time man-in-the-loop simulation can be used in a variety of research, testing and training roles where safety, efficiency and/or economy are important. Simulation can allow complete control and uniformity over driving conditions and permit analysis of a range of vehicle and driver behavior variables. Simulation complexity and fidelity requirements will vary depending on application requirements. This paper reviews past and current driving simulation development efforts and applications. Simulation requirements are assessed relative to various applications, including vehicle handling, driver behavior, training, licensing and fitness for duty testing.

For almost twenty years, researchers have attempted to develop an in-vehicle system which would prevent an impaired driver from operating his or her motor vehicle. These systems have ranged from breath testers to psychomotor tests, and have prevented operation of the vehicle by such methods as preventing the vehicle from starting or alerting drivers, and the police through alarm systems. This paper discusses the background leading to an in-vehicle system which was built and tested. We also discuss the system and its components, and present the results of two tests involving convicted drunk drivers. While the primary purpose of this project was to determine the feasibility of this type of system, the results of the two tests show promise for the reduction of impaired driving trips.

Handling and stability problems are typically revealed under limit performance maneuvering conditions where tires are pushed to high slip angles under high normal loading conditions. This paper reviews vehicle dynamics handling and stability models relative to tire characteristics and examines tire testing data obtained under normal and extreme maneuvering conditions. Tire data is normalized according to design characteristics in order to reveal basic maneuvering behavior that is relatively independent of size and construction. Computer simulation analysis is used to demonstrate the influence of tire characteristics on handling and stability.

The driver's ability to control the lateral position of an automobile is dependent on his perception of the command path (roadway) to be followed. This perception is affected by both the configuration of road markings and other features, and the visibility of these elements. As visibility decreases, the driver's preview of the commanded path is reduced. Theory indicates that driver performance should degrade with reduced preview and configurational parameters which characterize the intermittent nature of delineation (e.g., dashed lines). This paper describes a simulation experiment in which driver behavior and driver/vehicle system performance were measured over a range of visibility and configuration parameter variations. Driver dynamic response and noise (remnant) were reliably affected by variations in visibility and configuration. These effects were also reflected in system performance measures such as lane deviations.

This paper presents simple linear and non-linear dynamic models and numerical procedures designed to permit efficient vehicle dynamics analysis on microcomputers. Vehicle dynamics are dominated by tire forces and their precursor input variables, and a few inertial and suspension properties. The steady state and dynamic models discussed herein include a comprehensive, unlimited maneuver tire model with relatively simple vehicle suspension kinematics and inertial dynamics to cover the full vehicle maneuvering range from straight running to combined limit cornering and braking or acceleration. An attempt was made to minimize the required tire and vehicle model parameter set and to include easily obtainable parameters. The computer analysis procedures include: A steady state model for determining perturbation side force coefficients, and a stability factor and maneuvering time constant for lateral/directional control.

This paper reviews and expands previously published driver steering control models. The driver model is structured to control vehicle heading angle and lane position. Field test data are used to validate model structure. The closed-loop stability of the driver/vehicle system is analyzed using a two degree of freedom vehicle dynamics approximation. This analysis is used to develop constraints among the various driver model parameters and their dependence on vehicle characteristics. Driver/vehicle model approximations are also used to explore the effects of driver behavior on steering performance.

Computer simulation and real-time, interactive approaches for analysis, interactive driving simulation, and hardware-in-the-loop testing are finding increasing application in the research and development of advanced automotive concepts, highway design, etc. Vehicle dynamics models serve a variety of purposes in simulation. A model must have sufficient complexity for a given application but should not be overly complicated. In interactive driving simulation, vehicle dynamics models must provide appropriate computation for sensory feedback such as visual, motion, auditory, and proprioceptive cuing. In stability and handling simulations, various modes must be properly represented, including lateral/directional and longitudinal degrees of freedom. Limit performance effects of tire saturation that lead to plow out, spin out, and skidding require adequate tire force response models.

Driver response and performance can be quantified by observing the stimulus-response environment. Yet the driver's inherent adaptability allows him to have seemingly adequate performance in potentially hazardous driving situations even though he may be operating near the acceptable safety limits. Physiological measures of the driver's internal state can provide further quantification of his performance level and can give a measure of his workload or safety performance margin. Measures of driver physiological and control responses have been made under gust disturbance conditions with the subject's car operating at various speeds. The experimental techniques and data are described, and correlations between the situational parameters and driver stress and control response are shown.

Performance testing provides an important complement to urine testing as a determinant of fitness for duty. Performance testing can be conducted immediately to screen out impaired workers before they undertake safety related job functions. Urine testing involves the expense and delay of laboratory testing, and results relate more to life style than current on-the-job performance capability. This paper reviews performance based testing and discusses the development and application of two performance based screening devices. One device has the capability of rapidly screening for impaired psychomotor performance given previous baseline data. The second device provides the potential for screening psychomotor and divided attention performance without prior experience or baseline data.

Motion cueing algorithms can improve the perceived realism of a driving simulator, however, data on the effects on driver performance and simulator sickness remain scarce. Two novel motion cueing algorithms varying in concept and complexity were developed for a limited maneuvering workspace, hexapod/Stuart type motion platform. The RideCue algorithm uses a simple swing motion concept while OverTilt Track algorithm uses optimal pre-positioning to account for maneuver characteristics for coordinating tilt adjustments. An experiment was conducted on the US Army Tank Automotive Research, Development and Engineering Center (TARDEC) Ride Motion Simulator (RMS) platform comparing the two novel motion cueing algorithms to a pre-existing algorithm and a no-motion condition.

Interactive simulation requires providing appropriate sensory cuing and stimulus/response dynamics to the driver. Sensory feedback can include visual, auditory, motion, and proprioceptive cues. Stimulus/response dynamics involve reactions of the feedback cuing to driver control inputs including steering, throttle and brakes. The stimulus/response dynamics include both simulated vehicle dynamics, and the response dynamics of the simulation hardware including computer processing delays. Typically, simulation realism will increase with sensory fidelity and stimulus/response dynamics that are equivalent to real-world conditions (i.e. without excessive time delay or phase lag). This paper discusses requirements for sensory cuing and stimulus/response dynamics in real-time, interactive driving simulation, and describes a modest fixed-base (i.e. no motion) device designed with these considerations in mind.

Interactive driving simulation is attractive for a variety of applications, including screening, training and licensing, due to considerations of safety, control and repeatability. However, widespread dissemination of these applications will require modest cost simulator systems. Low cost simulation is possible given the application of PC level technology, which is capable of providing reasonable fidelity in visual, auditory and control feel cuing. This paper describes a PC based simulation with high fidelity vehicle dynamics, which provides an easily programmable visual data base and performance measurement system, and good fidelity auditory and steering torque feel cuing. This simulation has been used in a variety of applications including screening truck drivers for the effects of fatigue, research on real time monitoring for driver drowsiness and measurement of the interference effect of in-vehicle IVHS tasks on driving performance.

This paper considers ground vehicle lateral/directional stability which is of primary concern in traffic safety. Lateral/directional dynamics involve yawing, rolling and lateral acceleration motions, and stability concerns include spinout and rollover. Lateral/directional dynamics are dominated by tire force response which depends on horizontal slip, camber angle and normal load. Vehicle limit maneuvering conditions can lead to tire force responses that result in vehicle spinout and rollover. This paper describes accident analysis, vehicle testing and computer simulation analysis designed to give insight into basic vehicle design variables that contribute to stability problems. Field test procedures and results for three vehicles are described. The field test results are used to validate a simulation model which is then analyzed under severe maneuvering conditions to shed light on dynamic stability issues.

Vehicle handling and stability are significantly affected by inertial properties including moments of inertia and center of gravity location. This paper will present an analysis of the NHTSA Inertia Database and give regression equations that approximate moments of inertia and center of gravity height given basic vehicle properties including weight, width, length and height. The handling and stability consequences of the relationships of inertial properties with vehicle size will be analyzed in terms of previously published vehicle dynamics models, and through the use of a nonlinear maneuvering simulation.

This paper describes the driver/vehicle modeling aspects of a computer simulation that can respond to highway engineering descriptions of roadways. The driver model interacts with a complete vehicle dynamics model that has been described previously. The roadway path is described in terms of horizontal and vertical curvature and cross slopes of lanes, shoulders, side slopes and ditches. Terrain queries are made by the vehicle dynamics to locate tires on the roadway cross-section, and to define vehicle path and road curvature at some distance down the road. The driver model controls steering to maintain lateral lane position. Speed is maintained at a speed limit on tangents, and decreased as needed to maintain safe lateral acceleration. Because the bandwidth of longitudinal (speed) control is much lower than lateral/directional (steering) control, the driver model looks further ahead for speed control than for steering.

This paper describes the results of an experiment concerning driver behavior in car following tasks. The motivation for this experiment was a desire to understand typical driver car following behavior as a guide for setting the automatic control characteristics of an ACC (Adaptive Cruise Control) system. Testing was conducted under both test track and open road driving conditions. The results indicate that car following is carried out under much lower bandwidth conditions than typical steering processes. Dynamic analysis shows driver time delay in response to lead vehicle velocity change on the order of several seconds. Typical longitudinal acceleration distributions show standard deviations of less than 0.05 g (acceleration due to gravity).

Dynamic stability is influenced by vehicle and tire characteristics and operating conditions, including speed and control inputs. Under limit performance operating conditions, maneuvering can force a vehicle into oversteer and high sideslip. The high sideslip results in limit cornering conditions, which might proceed to spinout, or result in tip-up and rollover. Oversteer and spinout result from rear axle tire side force saturation. Tip-up and rollover occur when tire side forces are sufficient to induce lateral acceleration that will overcome the stabilizing moment of vehicle weight. With the use of computer simulation and generic vehicle designs, this paper explores the vehicle and tire characteristics and maneuvering conditions that lead to loss of directional control and potential tip-up and rollover.