Search Results

Enhanced SATCOMs for Unmanned Aerial Systems The Bus Too Tough to Die Combating Infrared Threats on the Battlefield Optical Interconnect Design Challenges in Space High-Performance Computing for the Next-Generation Combat Vehicle Merging Antenna and Electronics Boosts Energy and Spectrum Efficiency Integrated Magneto-Optical Devices for On-Chip Photonic Systems Development of magneto-optical (MO) materials could lead to a range of nonreciprocal optical devices for emerging standardized photonic integrated circuit (PIC) fabrication processes. Low Power Optical Phase Array Using Graphene on Silicon Photonics Electrostatic doping of 2D materials embedded in waveguides could enable ultrafast devices with unprecedented power. Spatial Resolution and Contrast of a Focused Diffractive Plenoptic Camera New technology captures spectral and spatial information of a scene in one snapshot while raising pixel counts and improving image quality.

Designing a High-Speed Decoy Unmanned Aerial Vehicle (UAV) Using Thermoplastics in Aerospace Applications In-Flight Real-Time Avionics Adaptation Using Turbine Flow Meters for Aerospace Test and Measurement Applications Communicating from Space: The Front End of Multiscale Modeling Laser-Based System Could Expand Space-to-Ground Communication Hydraulic Testing of Polymer Matrix Composite 102mm Tube Section Research could lead to development of a composite material that can be processed at a low temperature and still be used at 1000°F. Permeation Tests on Polypropylene Fiber Materials Study attempts to determine if polypropylene nanofiber materials can be used in air filtration systems to remove toxic vapors. Inter-Laboratory Combat Helmet Blunt Impact Test Method Comparison Ensuring consistent test methods could reduce the risk of head injuries.

Multi-Domain Command and Control (MDC2) Changing the Face of Modern Warfare Loop Thermosyphons Gravity-Driven Two-Phase Cooling for the 21st Century CompactPCI Serial Space A New Embedded System Specification Takes on Extreme Environments Plain Bearings for Aerospace Applications Additive Manufacturing Materials for RF Components NASA CubeSats: Pushing the Boundaries of Technology Content Addressable Memory (CAM) Technologies for Big Data and Intelligent Electronics Enabled By Magneto-Electric Ternary CAM New associative memory approach based on the propagation of spikes provides ultra-low energy search operations. Natural DNA-Based Nonvolatile Resistive Switching Memory Reliable memory devices can be realized within a single macromolecule based on natural DNA.

Into the DEAP The Distributed Electrical Aerospace Propulsion project looks toward a future optimized integrated propulsion system that will allow cleaner, quieter, and more efficient performance incorporated into a radically innovative airframe that will feature enclosed electrically powered fans.

Lithium-ion refinement Even as high-profile fires create concern, battery and car makers accelerate their move toward lithium-ion technology with advances in cost, performance, and safety. NASA's quest for maximum efficiency As part of its hybrid body wing aircraft with turboelectric distributed propulsion system, NASA has proposed to use a superconducting and cryogenic electrical system to connect the electrical output of the generators to the motors.

Easy to control Designers grab a range of technologies to create controls that are simpler for operators to use. Designing quiet off-highway equipment OEMs and suppliers are using new materials and innovative designs to reduce NVH for both vehicle operators and the environment. Using FEA in off-highway design The process of considering weld redundancy in virtual simulation is a complex way of ensuring that weldment design is robust enough to prevail over accidental weld redundancy that might occur during manufacturing. Efficient and effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, begins term as chief elective officer of SAE International. Making battlefield targets disappear The use of 'smart' special materials has the potential to radically alter the way military platforms are defended, and used.

The man challenges of Tier 4 engineering Cutting and controlling emissions are the surface goals, but designers must also manage to cut and control costs, while adding complexity. A cool look at heat protection CFD is used to predict flow and thermal fields within the engine compartment both at steady state and transient conditions. Hushing hydraulics Researchers from the Georgia Institute of Technology put their energies into novel, compact devices for reducing fluid-borne noise.

Natural bodies Researchers explore the benefits of natural fibers-coconut fibers, in particular- in the construction of novel hybrid composite-molded body panels.

Cold metal transfer process picks up heat CMT, with its unique characteristics, is a process that was designed particularly for welding of thin materials while achieving high quality standards.

Tying it all together Networks link control modules to bring more features and functions to the job site. Collaboration tools spread a wide net PLM suppliers are offering new tools that aid collaboration, expanding on core offerings in PDM, CAD, and CAE. The drive toward a hybrid transmission In-wheel hydraulic motors, hydraulic transformers, and a common pressure rail with accumulators put new meaning in the word drivetrain. A deep dive into metallurgical failure Even with the best engineering processes and quality planning, deviations can occur with the incoming material, things can go wrong during the manufacturing process, and service conditions can be different than expected. Standards and 'coopetition' In the heavy-duty vehicle arena, adoption of standards for networking benefits everyone.

Delivering simulation benefits Product-development software tools are being put to good use in many off-highway industry segments. Movingalong with stationary power Performance, reliability, and cleanliness are just a few of the golden rules for all engines, whether they are propelling a tractor or powering a barn. Frames adapt to changing environments Heavy-equipment frames do not often get a lot of attention from customers, due mainly to the fact that they get plenty of attention during the design cycle. 2005 technology in review A look back at some of the most significant technological innovations in the news during the past year, as deemed by readers and editors.

Testing in the field Hardened data-acquistion modules benefit companies conducting off-highway testing in harsh environments. Continuing to advance technology With close to $1 billion spent on R & D in 2004 alone, Caterpillar is taking a lead role in the push to move the commercial-vehicle industry forward. Testing trends This special section highlights some of the latest equipment used by engineers to evaluate new technologies. The forgotten compact engine Though heavy-duty engines have gotten most of the industry attention lately, smaller engines are out there working hard, with seemingly little respect. Productivity drives future agricultural technologies SAE 100 Future Look: Despite the tremendous rate of change in the agricultural equipment industry, one common theme has led the technological advances in agricultural equipment.

Designing out emissions Researchers from Michigan Technological University designed and tested a single-cylinder, four-stroke engine with electronic fuel injection and catalytic exhaust treatment for a snowmobile application. Networking to extend equipment life Equipment developers are using local area networks to gather specific usage and maintenance data in response to the needs of off-highway equipment owners and leasing companies to maximize investments. CAE goes off-highway A look at how manufacturers are saving time and improving quality by using computer simulation. Engineering the first 50-ton ADT While it could be said that the articulated frame truck is now a mature concept, Bell Equipment moved the goal posts by redefining both the weight class and application range for this versatile machine.

Komastu produces in Peoria Advanced heavy-duty robotic frame welding technology, new factory-based transportation systems, and major changes to factory layout combine to improve quality and reduce product cycle times for Komastu at its Peoria, IL, plant. Readers' Choice: Top Technologies of the Year Readers have selected the ten most interesting stories in SAE Off-Highway Engineering during the past year. They appear in shortened form. Results are based on reader-response choices following feature articles and shorter technology items. E-business evolves What follows is an update of the year's off-highway Internet-based activities intended to streamline operations along the supply chain and speed engineering product development. Manufacturing in the computer age Today's high-tech products require high-tech processes.

Integration opens the door Semiconductor suppliers are integrating many functions into power devices while also cutting power consumption in an environment, automotive doors, where 8-bit microcontrollers still hold sway.

Democratisation of Technology Ian Adcock caught up with Andreas Schamel, Quest for the self-propelled car A team of experts is working to integrate batteries into structural components, in a move that could not only lead to the efficiency and range of vehicles being increased, but ultimately see them powered by their own body structures. Ryan Borroff reports Flexible and intelligent Engine management systems are becoming increasingly complex, in order to cope with a wider range of fuels, as well as tougher legislation. Chris Edwards reports

Buckeye Current's TT triumph The Ohio State University reprised its third-place finish in the 2014 TT Zero for all-electric motorcycles, beating some of the pros on the world's toughest race circuit. Kettering FSAE team improved as season progressed Lowest priced may not mean the best, but certainly not the worst. Leveling the field: getting #girlsinstem Despite facing the brunt of gender segregation, women are forging ahead and dramatically improving STE M, both academically and professionally. Mercedes-AMG's SLS departure opens door to new GT Powering the car is an all-new biturbo 4.0-L V8 available with two power levels: hot (GT) at 340 kW (456 hp) and exceedingly hot (GTS) at 375 kW (503 hp).

The comeback car The Cal Poly Pomona FSAE Team implements several measures to help overcome setbacks and achieve a podium finish at Formula SAE Lincoln. Going deep The uBox concept car developed as part of Clemson's Deep Orange program features a uniquely formed roof part. Creating a monster North Dakota State University SAE Clean Snowmobile Challenge team brings to life a war-torn engine pieced together with parts from another.

Diesel gets a promotion at SAE Clean Snowmobile Challenge The main rules change for the 2015 season is creation of a new engine category (diesel), the event's organizer notes in providing an overview of the SAE Collegiate Design Series competition. Wisconsin-Stout puts faith in gearbox redesign for Baja Blue Devil Racing Team believes packaging and durability advantages more than offset weight and low-end-torque penalties. Test cell at Kansas University does double duty Single-cylinder engine test cell designed for research into biodiesel also serves as an instruction tool for students. University of Michigan students have hand in Volt battery reliability Technology co-developed by U of M monitors the quality of welds used in the joining of Chevy Volt battery cells.

The Nano in retrospect A senior graduate student in the Department of Mechanical Engineering at the Indian Institute of Technology looks at the development of the world's cheapest car and its effect on Indian car users. A different riff on your basic two-seat electric car Markus Lienkamp, Chair of Automotive Engineering at the Technical University of Munich, is leading the Visio.M project, a German government-supported R&D effort to produce a low-cost, high-utility electric car that might attract the interest of the middle European mass market. Materials lead the way to vehicle mass reduction Reducing a vehicle's mass opens the door for a downsized engine and transmission, a lighter cradle and body structure, smaller wheels and brakes, as well as a weight-slimmed suspension. The start point for this ripple effect is materials.