Search Results

This SAE Standard applies to fluorescent refrigerant leak detection dye injection equipment for use in ultraviolet leak detection when servicing mobile air-conditioning systems.

This information applies to refrigerant used to service automobiles, light trucks, and other vehicles with similar CFC-12 (R-12) systems. Systems used on mobile vehicles for refrigerated cargo that have hermetically sealed, rigid pipe, are not covered in this document.

The purpose of this SAE Recommended Practice is to provide criteria for determining the acceptability of candidate retrofit refrigerants to replace CFC-12 (R-12) in mobile A/C systems originally designed to use CFC-12 (R-12).

This SAE Recommended Practice is restricted to mechanical vapor compression refrigerant systems that provide cooling for the occupant’s compartment. This document provides guidelines for refrigerant containment and safety for a mobile air-conditioning (A/C) system. It is not intended to restrict the use of, or further development of, other types of refrigeration systems for passenger compartment cooling. Should other systems be found practical at some future time, this document may be amended or an additional recommended safety practice drawn up for other types of systems. This document only addresses CFC-12 (R-12) and HFC-134a (R-134a) refrigerants. To prevent mobile A/C system refrigerant contamination, all other alternate refrigerants considered for automotive use require unique service fittings.

This information applies to refrigerant used to service automobiles, light trucks, and other vehicles with similar CFC-12 systems. Systems used on mobile vehicles for refrigerated cargo that have hermetically seated, rigid pipe are not covered in this document.

This SAE Standard applies to HFC-134a refrigerant used to service motor vehicle passenger compartment air-conditioning systems designed or retrofitted to use HFC-134a. Hermetically sealed, refrigerated cargo systems are not covered by this document.

This SAE Standard covers reinforced rubber, reinforced thermoplastic, or otherwise constructed hose, or hose assemblies, intended for conducting liquid and gaseous refrigerants for service connections from mobile air-conditioning systems to service equipment such as a manifold gauge set and vacuum pumps or for use internally, in charging stations or service equipment intended for use in servicing mobile air-conditioning systems.

This SAE Standard covers reinforced rubber, reinforced thermoplastic, or otherwise constructed hose, or hose assemblies, intended for conducting liquid and gaseous refrigerants for service connections from mobile air conditioning systems to service equipment such as a manifold gauge set and vacuum pumps or for use internally, in charging stations or service equipment intended for use in servicing mobile air-conditioning systems.

This SAE Recommended Practice is restricted to mechanical vapor compression refrigerant systems driven by the vehicle or auxiliary engine, which provides cooling for the passenger compartment. This document provides guidelines for refrigerant containment and safety for a mobile air-conditioning system. It is not intended to restrict the use of, or further development of, other types of refrigeration systems for passenger compartment cooling. Should other systems be found practical at some future time, this document may be amended or an additional recommended safety practice drawn up for such other systems.

This SAE Recommended Practice is restricted to mechanical vapor compression refrigerant systems driven by the vehicle or auxiliary engine, which provides cooling for the passenger compartment. This document provides guidelines for refrigerant containment and safety for a mobile air-conditioning system. It is not intended to restrict the use of, or further development of, other types of refrigeration systems for passenger compartment cooling. Should other systems be found practical at some future time, this document may be amended or an additional recommended safety practice drawn up for such other systems.

The purpose of this SAE Standard is to provide equipment specifications for CFC-12 (R-12) recycling equipment. This information applies to equipment used to service automobiles, light trucks, and other vehicles with similar CFC-12 (R-12) air-conditioning (A/C) systems. Systems used on mobile vehicles for refrigerating cargo that have hermetically sealed systems are not covered in this document. The equipment in this document is intended for use with refrigerant that has been directly removed from, and intended to be returned to, a mobile A/C system. Should other revisions due to operational or technical requirements occur, this document may be amended.

This SAE Standard applies to electronic probe-type leak detectors used to service motor vehicle passenger compartment air conditioning systems. This document does not address any safety issues concerning their design or use.

The purpose of this SAE Recommended Practice is to provide a service procedure for retrofitting a CFC-12 (R-12) system to HFC-134a (R-134a) while preserving performance and integrity of the air-conditioning (A/C) system. The steps outlined in this procedure are complete when combined with good service practices and the vehicle manufacturer's recommendations (if available) for retrofitting their models. Separate service equipment, for CFC-12 (R-12) and HFC-134a (R-134a), including refrigerant recovery/recycle (R/R), service manifolds, vacuum pumps, and charging equipment shall be used to preserve the purity of the refrigerants and the mobile A/C systems. This procedure will minimize release of refrigerant to the atmosphere, and will preserve the integrity of the recycled CFC-12 (R-12) and HFC-134a (R-134a) supplies. This document applies to A/C systems used to cool the passenger compartment of automobiles, light trucks, and other vehicles with similar CFC-12 (R-12) systems.

This SAE Recommended Practice provides a test procedure and performance guideline for evaluating passenger car windshield defrosting systems. It is limited to results of tests that can be conducted on uniform test equipment in commercially available laboratory facilities. The current engineering practice prescribes that for laboratory evaluation of defroster systems, a known quantity of water shall be sprayed on the windshield to form an ice coating and then melted by the defroster under specific vehicle operating conditions. The procedure provides uniform and repeatable laboratory test results, even though under actual conditions such a coating would be removed by scraping before driving the vehicle. The performance obtained, therefore, does not directly relate to actual driving conditions, but serves as a laboratory performance indicator for comparing test results within or between systems.

This SAE Recommended Practice provides a test procedure and performance guideline for evaluating passenger vehicle windshield defrosting systems. It is limited to results of tests that can be conducted on uniform test equipment in commercially available laboratory facilities. The current engineering practice prescribes that for laboratory evaluation of defroster systems, a known quantity of water shall be sprayed on the windshield to form an ice coating and then melted by the defroster under specific vehicle operating conditions. The procedure provides uniform and repeatable laboratory test results, even though under actual conditions such a coating would be removed by scraping before driving the vehicle. The performance obtained, therefore, does not directly relate to actual driving conditions, but serves as a laboratory performance indicator for comparing test results within or between systems.

The scope of this SAE Recommended Practice is to establish uniform test procedures and minimum performance requirements for sedan passenger car backlight defogging systems. It is limited to tests that can be conducted on uniform test equipment in commercially available laboratory facilities. The test procedures and minimum performance requirements, outlined in this recommended practice, are based on currently available engineering data. It is the intent that all portions of the recommended practice will be periodically reviewed and revised as additional knowledge regarding defogging performance is developed.

This SAE Standard applies to electronic probe-type leak detectors used to service motor vehicle passenger compartment air-conditioning systems. This document does not address any safety issues concerning their design or use.

The scope of this SAE Recommended Practice is to establish uniform test procedures for passenger cars, to determine whether the system is defined as a defroster or defogger, and to establish minimum performance requirements for each system. A defroster for purposes of this practice is a system which will remove moisture and/or frost from the interior surface of the backlight at −18 °C. A defogger is a system which will remove moisture and/or fog from the interior surface of the backlight at 4 °C. The test procedure is intended to simulate actual conditions by utilizing either a cold room with an appropriate device to introduce air flow over the backlight or a sufficiently large wind tunnel with ambient temperature control. The test procedure and the minimum performance requirements are based on currently available engineering data.

The purpose of this SAE Information Report is to provide information on refrigerant issues of concern to the mobile air-conditioning industry.