Refine Your Search

Date

Date

Topic

Topic

Author

Author

Affiliation

Affiliation

Aerospace Tools and equipment Defense industry

Search Results

Viewing 1 to 20 of 4868
123Next >Last >>
Sort by title
Technical Paper

Zero-G Simulation using Neutral Buoyancy
1989-07-01
891529
For human beings who have been reared on the earth with its 1 G gravitational field, the condition of weightlessness is a world with which we are unfamiliar. Even if the layout and equipment configuration of a spacecraft designed to compensate for operation under Zero-G conditions, there are some things which are not effective under actual weightless conditions. In the design of a manned spacecraft, it is necessary to accumulate design data on human performance in a weightless condition, then to undertake design evaluations and verification under weightless conditions. In this paper, testing for the purpose of evaluating the effectiveness of Zero-G simulation using neutral buoyancy, conducted first of all in Japan, and recommendations on the equipment and Facilities required to conduct such simulations, are described.
Technical Paper

XB-70A Laboratory for Progress
1966-02-01
660276
The development of the XB-70 research aircraft produced advancements in many fields of technology. This paper covers a few of these advancements in the areas of materials, equipment, and manufacturing. These include honeycomb construction, PH 15-7 alloy steel, vacuum melted H-11 steel, equipment capable of withstanding high temperatures, chemical milling of many different alloys, miniaturized welding equipment, and exothermic brazing techniques.
Technical Paper

XB-70 Ground Servicing and Safety Precautions
1966-02-01
660275
Planning for ground servicing and maintenance started in the proposal phase and has been followed by test program experience with the XB-70 Mach 3 air vehicle. Servicing and associated safety requirements are summarized. Discussion of maintenance and support actions includes mention of equipment provided to meet the requirements. Preflight, postflight, and periodic operations are outlined, along with some indication of changes that resulted when plans were put into practice. The demands of a high performance flight test air vehicle limit movements toward simplification.
Technical Paper

X-Ray Rocking Curve Analysis of the Aging and Deformation Characteristics in the Al-Li Alloy
1989-04-01
891057
A non-destructive x-ray technique, the double crystal diffractometer method, is presented as a tool to investigate the aging and deformation behavior of the Al-Li alloy. This is a sensitive method for measuring the strain and dislocation density within individual grains through the x-ray rocking curve. In addition, models were developed to describe the aging and deformation characteristics of this alloy.
Technical Paper

X-Ray - A Necessary Tool for Detecting Incipient Structural Failures in Service Aircraft
1964-01-01
640510
X-ray is an indispensable aid in locating and determining the extent of incipient failures in structure which is inaccessible by position or covered by multiple layers of metal. It is also the most feasible method for checking oil coolers for contamination; bonded honeycomb panels for water; fuel lines for erosion; and with a 360 deg emission tube, fuselage frames for structural integrity without removing the interior upholstery and panels from the passenger compartment or cargo compartments.
Technical Paper

X-29A Forward-Swept-Wing Flight Research Program Status
1987-11-13
872418
The X-29A aircraft is a fascinating combination of integrated technologies incorporated into a unique research aircraft. The X-29A program is a multiple-agency program with management and other responsibilities divided among the National Aeronautics and Space Administration (NASA), the Defense Advanced Research Projects Agency (DARPA), the U.S. Air Force, and the Grumman Corporation. This paper presents an overview of the recently completed X-29A flight research program, the objectives achieved to date, and a discussion of the future of the flight research program. Also discussed are the flight test approach expanding the envelope, typical flight maneuvers performed, X-29A program accomplishments, lessons learned for the Number One aircraft, and future plans with the Number Two aircraft. A schedule for both the Number One and Number Two aircraft is presented.
Standard

Wrenches; Flare Nut, Crowfoot, 6- and 12-Point Non-Distorting
2024-01-22
CURRENT
AS4167D
This SAE Aerospace Standard (AS) covers 6-point and 12-point flare nut crowfoot, flare nut wrenches, double end flare nut wrenches, combination box end and flare nut wrenches, combination open end and flare nut wrenches, and ratcheting flare nut wrenches that are designed with the following requirements: (a) non-distorting usage; (b) possessing the strength, clearances, and internal wrenching design to be used on hydraulic tube fittings that conform to the requirements of SAE J514 and ISO 8434-2; and (c) transmitting torque to tube fittings without bearing on the apex of fitting wrenching points. Inclusion of dimensional data in this document is not intended to imply that all of the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard

Wrenches, Hand, Twelve Point, High Strength, Thin Wall
2023-03-20
CURRENT
AS954H
This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) sockets, universal sockets, box wrenches and torque adaptors which possess the strength, clearances, and internal wrenching design so configured that, when mated with bi-hexagonal fasteners conforming to the requirements of AS870 for inch sizes and ISO 4095 for metric sizes, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. Inclusion of dimensional data in this document is not intended to imply that all the products described herein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes. The dimensional limits of box and combination wrench lengths have been established to provide configuration control for tool storage applications.
Standard

Wrench, Spanner
2021-07-28
CURRENT
AS6018A
This SAE Aerospace Standard (AS) covers adjustable and non-adjustable spanner wrenches generally used for aerospace machinery maintenance and for tightening and loosening hose couplings and hydrant caps. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Technical Paper

Workload and Situation Awareness in Future Aircraft
1987-10-01
871803
Cockpits have changed dramatically over the last ten years. The electro-mechanical instruments have largely been replaced with electro-optical controls and displays. This change in the pilot-vehicle interface, coupled with a second development, the emergence of a very powerful airborne computer system, an Electronic Crewmember, has had a significant impact on workload in the cockpit. Workload has shifted from physical to mental, and many workload measurement tools applied previously may no longer be appropriate. This paper discusses the prediction, real time measurement and dynamic allocation of cockpit workload in an aircraft with a crew of two -- one human and one electronic.
123Next >Last >>
X