Search Results

As vehicle emissions regulations become increasingly stringent, there is a growing need to accurately model aftertreatment systems to aid in the development of ultra-low NOx vehicles. Common solutions to this problem include the development of complex chemical models or expansive neural networks. This paper aims to present the development process of a simpler Selective Catalytic Reduction (SCR) conversion efficiency Simulink model for the purposes of modeling tail pipe NOx emission levels based on various inputs, temperature shifts and SCR locations, arrangements and/or sizes in the system. The main objective is to utilize this model to predict tail pipe NOx emissions of the EPA Federal Test Procedures for heavy-duty vehicles. The model presented within is focused exclusively on heavy-duty application compression ignition engines and their corresponding aftertreatment setups.

The reduction of full acceleration truck pass-by noise conforming to Type ECE-51 regulation (Reference 1) was predicted in a hemi-anechoic chassis dynamometer chamber with microphone arrays and compared with actual test track results. This gave a close match to the track data, with both showing a 4 dB reduction in the A-weighted overall noise level after identical acoustic treatments were applied. Noise control materials were selected to perform as acoustic barriers and absorbers. These were optimized by analyzing the 1/3 octave spectra, determining dominant frequency bands, in critical source locations and engine speeds, and using combinations that dissipate or contain energy well within those bands. With the truck being stationary while tested, important source locations could be quickly identified both subjectively and with localization tools such as Beamforming.

A cyclically pressurized hydraulic component made of compacted graphite iron (CGI) is examined in fatigue design. This CGI component has a notch, formed at the intersection of two drilling channels. This notch causes the stress to be locally elevated and may potentially serve as a fatigue initiation site. Traditional fatigue design approaches calculate the maximum stress/strain range acting at the notch and apply the Neuber correction when calculating fatigue life. It is, however, found that the fatigue life is dramatically underestimated by this method. This prompts the use of the critical distance method because the stresses are concentrated in a relatively small volume. When using the critical distance method, the fatigue life is correctly predicted. Finally, a fracture mechanics model of the crack check the reasonableness of the critical distance method results.

With the emission norms becoming more and more stringent along with the focus on reducing ownership and operating costs, the need to optimize the aftertreatment system becomes much more evident. Thus, the well monitored, optimized usage of urea or ammonia (NH₃) for the NOx reduction in an SCR system is critical to reduce the operating cost of the vehicles and to comply with emission regulations. In Ammonia Storage and Delivery System (ASDS), pure gaseous NH₃ from the NH₃ cartridges is being used for the reduction of the engine-out NOx in the exhaust stream over the NPF (NOx Particulate Filter). In almost all NOx reduction systems, NOx sensors play an important role in determining the amount of urea or NH₃ to be dosed for efficient NOx reduction with minimal NH₃ consumption and slippage for best possible fluid economy.

The TOP TIERTM Diesel fuel standard was first established in 2017 to promote better fuel quality in marketplace to address the needs of diesel engines. It provides an automotive recommended fuel specification to be used in tandem with regional diesel fuel specifications or regulations. This fuel standard was developed by TOP TIERTM Diesel Original Equipment Manufacturer (OEM) sponsors made up of representatives of diesel auto and engine manufacturers. This performance specification developed after two years of discussions with various stakeholders such as individual OEMs, members of Truck and Engine Manufacturers Association (EMA), fuel additive companies, as well as fuel producers and marketers. This paper reviews the major aspects of the development of the TOP TIERTM Diesel program including implementation and market adoption challenges.

As North American truck manufactures have entered the global market it has become apparent that there are widely varying drive-by noise regulations required in various areas of the world. This paper will describe differences between various test procedures, track layouts, and required levels. Data will be presented showing vehicle results from various procedures, used to quantify differences in noise levels between a range of procedures. Countries were ranked from least restrictive to most restrictive based on test procedures and legal market requirements.