Search Results

To comply with Tier II Bin 5 light-duty or 2010 heavy-duty NOx emission standards, all diesel engines require some sort of NOx control device. Selective Catalytic Reduction of NOx with hydrocarbons (HC-SCR) to reduce NOx from diesel exhaust emissions is an attractive technology for lean NOx control, especially when diesel fuel is used as the reductant. However, it has been reported that when diesel fuel is used as the reductant catalyst deactivation occurred (1). In a companion paper, we demonstrated that the HC-deactivation is caused by the mismatch of the adsorption and desorption processes of either the reactants or the products of a normal SCR reaction (2). In this paper, we probe the nature of the catalyst deactivation with various reductants. Both hydrocarbons and oxygenates were used as the reductants. The deactivation or the mismatch in adsorption and desorption rates is molecular size or chain length dependent.

At the current state of diesel engine technology, all diesel engines require some sort of NOx control device to comply with Tier II Bin 5 light-duty or 2010 heavy-duty NOx emission standards. Selective Catalytic Reduction of NOx with hydrocarbons (HC-SCR) to reduce NOx from diesel exhaust emissions is an attractive technology for lean NOx control, especially when diesel fuel is used as the reductant. However, it has been reported that when diesel fuel is used as the reductant catalyst deactivation occurred. Even though this kind of deactivation is reversible at high enough temperatures, it is a deficiency that needs to be overcome for the successful implementation of the technology. We studied the HC-SCR catalyst deactivation using diesel fuel as the reductant. The variables investigated included catalyst temperature, HC:NOx ratio, NOx concentration, and space velocity. The results showed that one single parameter can be used to measure the catalyst deactivation: the HC-SCR activity.

The effects of lubricating oil on friction and engine-out emissions in a light-duty 2.2L compression ignition direct injection (CIDI) engine were investigated. A matrix of test oils varying in viscosity (SAE 5W-20 to 10W-40), friction modifier (FM) level and chemistry (MoDTC and organic FM), and basestock chemistry (mineral and synthetic) was investigated. Tests were run in an engine dynamometer according to a simulated, steady state FTP-75 procedure. Low viscosity oils and high levels of organic FM showed benefits in terms of fuel economy, but there were no significant effects observed with the oils with low MoDTC concentration on engine friction run in this program. No significant oil effects were observed on the gaseous emissions of the engine. PM emissions were analyzed for organic solubles and insolubles. The organic soluble fraction was further analyzed for the oil and fuel soluble portions.