Search Results

Current systems such as satellites, aircrafts, automobiles, turbines, wind power generators and traffic controls are becoming increasingly complex and/or highly integrated as prescribed by the SAE-ARP-4754 Standard. Such systems frequently require accurate generation, distribution and time or phase synchronization of signals with different frequencies that may be based on one reference signal and frequency. But the environment fluctuations or the non-linear dynamics of these operations cause uncertainties (skew and jitter) in the phase or time of the reference signal and its derived signals. So, techniques to reduce those causes or their effects are becoming important aspects to consider in the design of such systems. The PLL techniques are useful for establishing coherent phase or time references, jitter reduction, skew suppression, frequency synthesis, and clock recovery in numerous systems such as communication, wireless systems, digital circuits, rotors, and others.

Since its introduction at INPE, in the late 1960s, Systems Engineering has passed through phases of greater and lesser importance. Three different phases are clearly recognized. The first two phases are closely associated with efforts to develop space systems. The third and present phase is associated to the recent growth in the importance of Systems Engineering to the development of the contemporary large and complex systems. This paper is a summary review of the history of Systems Engineering at INPE from its inception to the present.

Systems are becoming increasingly more complex. To follow this increasingly complexity, systems engineering must evolve rapidly with the introduction of new methodologies, processes, tools, etc. Due to this rapid evolution, little attention is dedicated to the study of the history of its evolution. Currently there is the initiative of installation of a chapter of INCOSE (International Council on Systems Engineering) in Brazil and from this initiative emerged the interest of recovering the history of systems engineering in the country. There are indications that the introduction of systems engineering into Brazil occurred in the late 1960's, directly from NASA and that its first applications in Brazil were in Space Systems Engineering. This paper recovers the origins of systems engineering, of its introduction into Brazil, and of its use in space systems engineering.

In this work we discuss the fault avoidance and the fault tolerance approaches for increasing the reliability of aerospace and automotive systems. This includes: the basic definitions/concepts (reliability, maintainability, availability, redundancy, etc.), and characteristics (a priori analysis, a posteriori analysis, physical/hardware redundancy, analytical/software redundancy, etc.) of both approaches, their mathematical background and models (exponential, Weilbull, etc.), their basic theory, their methods and techniques (fault trees, dependence diagrams, Markov chains, etc.), some of their standards (SAE-ARP4761, AC 25.1309, etc.) and simulation environments (Cafta, etc.), and their applications to the reliability analysis and reliability improvement of aerospace and automotive vehicles. This is illustrated by some examples driven from the aerospace and automotive industries.

This paper presents the preliminary results of an "a posteriori" exercise of application of a Requirements Traceability Automation Tool (RT tool) to a set of documents. The documents have been prepared according to established Space System Engineering methodologies and with attention to text quality, but without attention to requirements traceability because the processes and methodologies used during their preparation predates the emergence of the processes and methodologies developed by Requirements Engineering (RE). This study is intended to determine some of the benefits of using a RT tool when compared with the previously used processes and methodologies. The set of documents under scrutiny have been prepared in the frame of the development of the CBERS-3 satellite (China-Brazil Earth Resources Satellite) and is composed of system, subsystem and equipment specification and covering documents related to the Electrical Power Subsystem (EPS) of the satellite.

On several engineering applications high Reliability is one of the most wanted features. The aspects of Reliability play a key role in design projects of aircraft, spacecraft, automotive, medical, bank systems, and so, avoiding loss of life, property, or costly recalls. The highly reliable systems are designed to work continuously, even upon external threats and internal Failures. Very convenient is the fact that the term 'Failure' may have its meaning tailored to the context of interesting, as its general definition refers to it as "any deviation from the specified behavior of a system". The above-mentioned 'deviation' may refer to: performance degradation, operational misbehavior, deviation of environmental qualification levels, Safety hazards, etc. Nevertheless, Reliability is not the only requirement for a modern system. Other features as Availability, Integrity, Security and Safety are always part of the same technical specification, in a same level of importance.

In this work we developed a comparative study between many resolution methods of the exponential matrix from an inequality extracted from a specific Liapunov function to obtain information about some stability regions for sampled-data control systems as a function of the sampling-time and the plant used. We used many methods from the literature like: power series, Cayley-Hamilton theorem, Lagrange-Sylvester theorem, eigenvalues/ eigenvectors decomposition and Padé rational approximation. The main objective of this study is to choose the most appropriate method for the resolution of this important problem and to use the results found as a basis for future works.

In this work we study the stability of digital controls of flexible/Vibratory aerospace/automobile systems by the graph norm technique, occurring in sampled-data control systems due to sampling period variations. To do so, this work tries to establish regions (graphs) of stability and instability in a Banach Space, the distances (norms) between them and a given design to detect analytically and/or numerically its margins of stability or conditions of instability. Based on that, we sketch the first steps for a design methodology of stable digital controllers of flexible/vibratory systems embedded in a sampled-data system with adjustable sampling periods of A/D and D/A converters. A short tutorial about the graph norm technique is also given and some theoretical results as well numerical results are shown. This work was done in two folds to unmask the stability secrets hidden in a general sampled-data control system, until today not revelated.

In this work, still under development, we study the stability degradation due to delays in a networked control system. Our networked system is composed by: 1) a computer with Rate Monotonic Scheduler policy and, 2) a communication network based on TDMA access. Under this scenario, we analyze an integrated communication-computing delay and define the worst delay. The simulations shows that the presence of a worst delay can be determined only with an extensive analysis. The simulations were done in Matlab/Simulink with the help of Truetime toolbox.

In this work we discuss some types of simulators and simulations, their characteristics and applications to the simulation and control of aerospace vehicles. This includes: the basic definitions, types and characteristics of simulators and simulations (physical, computational, hybrid, etc.; discrete events, discrete time, continuous time, etc; deterministic, stochastic, etc.) their basic compromise (simplicity × fidelity), their man-machine interfaces and interactions (virtual, constructive, live, etc.), their evolution law (time, events, mixed, etc.), their architectures (“standalone”, PIL, HIL, MIL, DIS, HLA, etc.), their environments (discrete, continuous, hybrid, etc.) and their applications to the simulation and control of aerospace vehicles. This is illustrated by some examples driven from the aerospace industry

In this work we discuss some types of simulation environments and laboratories, their characteristics and applications to the simulation and control of aerospace vehicles. This includes: the basic definitions, types and characteristics of simulators and simulations (physical, computational, hybrid, etc.; discrete events, discrete time, continuous time, etc; deterministic, stochastic, etc.) their basic compromise (simplicity × fidelity), their man-machine interfaces and interactions (virtual, constructive, live, etc.), their evolution law (time, events, mixed, etc.), their architectures (“stand-alone”, PIL, HIL, MIL, DIS, HLA, etc.), and especially, their environments (discrete, continuous, hybrid, etc.) and laboratories (physical, computational, hybrid, etc.), and their applications to the simulation and control of aerospace vehicles. This is illustrated by some examples driven from the aerospace industry.

In this work we discuss some types of simulation architectures and standards, their characteristics and applications to the simulation and control of aerospace vehicles. This includes: the basic definitions, types and characteristics of simulators and simulations (physical, computational, hybrid, etc.; discrete events, discrete time, continuous time, etc; deterministic, stochastic, etc.) their basic compromise (simplicity x fidelity), their man-machine interfaces and interactions (virtual, constructive, live, etc.), their evolution law (time, events, mixed, etc.), their architectures (“stand-alone”, PIL, HIL, MIL, DIS, HLA, etc.), their standards (OMBA, SIMNET, ALSP, DIS, HLA 1.3, HLA 1516, ASIA, AP2633, etc.) and their applications to the simulation and control of aerospace vehicles. This is illustrated by some examples driven from the aerospace industry

The realization of modern systems subjected to automatic control, such as aircraft, automobiles, satellites, rocket launchers, cargo and military ships, and so forth; increasingly assume, within its very set of requirements, the task of providing better dependability, i.e.: safety, reliability, and availability altogether. Towards this demand, fault-tolerant control greatly meets such growing demand of dependability, by its ability of recognizing the occurrence of potentially hazardous/hazardous faults within the overall (closed-loop) system, and by taking remedial action whenever necessary/mandatory. The process of fault tolerance can be segregated into two fundamental steps: (1) that of fault diagnosis, comprising fault detection-isolation-identification, and, (2) control adjustment/reconfiguration. This paper focuses on the second step, of control adjustment/reconfiguration.

Control systems that can switch between control or plant modes have the advantage of being simpler to design than an equivalent system with a single mode. However, the transition between these modes can introduce steps or overshootings in the state variables, and this can degrade the performance or even damage the system. This is can be of extreme importance in fields such as aerospace and automobilistic, as the switching between manual and autopilot modes or the switching of gears In this work, we will use integral criteria in original ways, to determine a coefficient on the system which should optimize the trajectory of the control signal, during the switching between two modes. Effectively, each transition will be done by a subsystem specific for it, according to the selected criterion. The simulations will be made in MATRIXx, MatLab or both, using models chosen from aerospace or automobilistic fields.

A major trend in modern aerospace and automotive systems is to integrate computing, communication and control into different levels of the vehicle and/or its supervision. A well fitted architecture adopted by this trend is the Common Bus Network Architecture. A Networked Control System (NCS) is called when the control loop is closed through a communication network. The presence of this communication network introduces new characteristics (sharing bus, delays, jitter etc.) to be considered at design time of a control system. This work focuses on the influences of data bus protocols on an aircraft Fly-By-Wire (FBW) networked control system. We intent to show, through simulations, the influences of sharing bus on a real time control system. To compare effects, we choose the CAN Bus protocol where the medium access control is event driven; and the TTP protocol where the medium access control is time driven.

A major trend in modern aerospace and automotive systems is to integrate computing, communication and control into different levels of the vehicle and/or its supervision. A well fitted architecture adopted by this trend is the common bus network architecture. A Networked Control System (NCS) is called when the control loop is closed through a communication network. The presence of this communication network introduces new characteristics (sharing bus, delays, jitter,etc) to be considered at design time of a control system. This work focuses on the effect of sharing bus between the control system and the other devices connected to the bus foreigner to control. These last devices are called interferences. We intented to show, through simulations, the influence of sharing bus on real time control systems performance. To compare effects, we choose the CanBus protocol where the medium access control is event driven; and the TTP protocol where the medium access control is time driven.

The measure of time intervals with relatively high accuracy (of 1 milisecond, at least) in PC computers is a relatively hard task to solve. But this is essential for the digital simulation, with sensors in the loop, of fast control systems. This work allows the reading of the programmable internal timer 8253 present in a typical PC, reaching 1 ms resolution, at least, through a C high level language routine. The determination of the angular velocity of a 53M2-30H Contraves 3-axis dynamic simulator used in that simulation was improved by the use of this work, allowing the acquisition of consecutive measures of angles and angular velocities with a time interval smaller than 10 ms in some cases. Using this routine and other simulator control and monitoring softwares we estimated the angular velocity faster (100 ms × 210 ms)and better than the simulator Rate Readout Module, and used it in a fast real time control simulation.

This works presents the generation and customization of real time code for embedded controllers using a modeling and simulation environment. When the controller model is considered satisfactory, the developers can use a code generation tool to build a real time source code capable to be migrated to an embedded target processor. The code generation tool used is capable to generate real time code in ANSI C or ADA 95 languages. This process can be customized to adequate to a target processor and/or a Real Time Operating System (RTOS). The code customization can be achieved using a specific Template Programming Language (TPL) that specifies how the code will be generated. This technique makes it possible the instantiation of real time embedded controllers code using the same controller model to a wide variety of target processors and/or RTOSs.

The purpose of this work is Fault Detection and Diagnosis (FDD) on a Knock Sensor because some of the modern petrol engines operate on the efficient four-stroke cycle, where each cylinder of the engine contains an intake and exhaust poppet valve that is operated at the appropriate time. The ECM (Engine Control Module) uses the Knock Sensor signal to control timing. The Knock Sensor detects engine knock and sends voltage signal to the ECM. These signals can be sufficient to detect abnormal combustion, like ‘spark knock’ and ‘surface ignition’. Engine knock occurs within a specified range. The Knock Sensor, located in the engine block, cylinder head, or intake manifold is tuned to detect that frequency, which motivates the use of signal models for detection. But this sensor is a wide-band accelerometer of the piezoelectric type too. Analogy with a general seismic mass system is possible since it is a general damped second order vibrating system which is forced into oscillatory motion.

This paper presents the first of four parts of the academic design of an Attitude Control System (ACS) for the Multi-Mission Platform (MMP) and its migration to a Real Time Operating System. The MMP is a three axis stabilized artificial satellite now under development at the National Institute for Space Research (INPE). Such design applied some software engineering concepts as: 1)visual modeling; 2)automatic code generation; 3)automatic code migration; 4)soft real time simulation; and 5)hard real time simulation. A block diagram based modeling and a virtual time simulation of the MMP ACS in its nominal operational mode were built in the MatrixX 7.1 environment satisfying the three axis pointing and stabilization requirements. After that, its AutoCode module was used to generate C ANSI code representing the block diagram model. Time characteristics were added to the ACS generated code to make it the real time control software of MMP nominal operational mode.