Standard
Welding, Electron-Beam
2022-01-21
CURRENT
AMS2681B
This specification defines the procedures and requirements for joining metals and alloys using the electron-beam (EB) welding process.
Search Results
Standard
Wave Soldering Procedure
2013-08-12
CURRENT
ARP1332D
The purpose of this recommended practice is to provide recommendations concerning the procedure for wave soldering.
Standard
Wave Soldering Procedure
2007-02-20
HISTORICAL
ARP1332C
The purpose of this recommended practice is to provide recommendations concerning the procedure for wave soldering.
Standard
WELDING, TUNGSTEN ARC, INERT GAS Non-Consumable Electrode (GTAW Method)
1985-10-01
HISTORICAL
AMS2685B
This specification defines the requirements for joining metals and alloys using the gas-tungsten-arc welding (GTAW) method.
Standard
WELDING, METAL ARC, INERT GAS Non-Consumable Electrode (GTAW Method)
1974-06-01
HISTORICAL
AMS2685
This specification defines the requirements for joining metals and alloys using the gas-tungsten-arc welding (GTAW) method.
Standard
WELDING, METAL ARC, INERT GAS Non-Consumable Electrode (GTAW Method)
1986-04-01
HISTORICAL
AMS2685A
This specification defines the requirements for joining metals and alloys using the gas-tungsten-arc welding (GTAW) method.
Standard
WAVE SOLDERING PROCEDURE
1997-03-01
HISTORICAL
ARP1332B
The purpose of this recommended practice is to provide recommendations concerning the procedure for wave soldering.
Standard
WAVE SOLDERING PROCEDURE
1988-04-01
HISTORICAL
ARP1332A
Standard
WAVE SOLDERING PRACTICE
1974-03-01
HISTORICAL
ARP1332
Standard
Vacuum Gauge Calibration
2024-05-17
CURRENT
ARP7446A
This SAE Aerospace Recommended Practice (ARP) addresses the general procedure for the best practices for minimizing uncertainty when calibrating thermal conductivity and cold cathode vacuum gauges, which includes the vacuum sensor(s) and accompanying electronics necessary for a pressure measurement to be made. It also includes the best practices for an in-process verification where limitations make it impossible to follow the best practices for minimizing uncertainty. Verifying the accuracy and operation of vacuum gauges is critical to ensure the maintenance of processes while under vacuum.
Standard
Vacuum Gauge Calibration
2019-03-06
HISTORICAL
ARP7446
This SAE Aerospace Recommended Practice (ARP) addresses the general procedure for the best practices for minimizing uncertainty when calibrating thermal conductivity and cold cathode vacuum gauges, which includes the vacuum sensor(s) and accompanying electronics necessary for a pressure measurement to be made. It also includes the best practices for an in-process verification where limitations make it impossible to follow the best practices for minimizing uncertainty. Verifying the accuracy and operation of vacuum gauges is critical to ensure the maintenance of processes while under vacuum.
Standard
Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less Impingement Applied
2010-01-05
HISTORICAL
AMS2530
This specification covers a coating consisting of tungsten disulfide without binders and not requiring a curing process.
Standard
Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less Impingement Applied
2019-01-14
CURRENT
AMS2530A
This specification covers a coating consisting of tungsten disulfide without binders and not requiring a curing process.
Standard
Tungsten Carbide-Cobalt Powder Agglomerated and Sintered
2003-04-30
HISTORICAL
AMS7881
This specification covers tungsten carbide-cobalt in the form of powder.
Standard
Trichloroethane 1, 1, 1, (Methyl Chloroform) Inhibited, Vapor Degreasing
2001-04-01
HISTORICAL
AMST81533
This specification covers the requirements of inhibited 1,1,1 trichloroethane for vapor degreasing, (see 6.1).
Standard
Treatment of Sheet Metal Parts Corrosion-Resistant Steel
2017-09-20
CURRENT
AMS2550F
This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic Corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.
Standard
Treatment of Sheet Metal Parts Corrosion-Resistant Steel
2014-07-31
HISTORICAL
AMS2550E
This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic Corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.
Standard
Training and Approval of Heat-Treating Personnel
2019-06-11
CURRENT
ARP1962B
This SAE Aerospace Recommended Practice (ARP) describes training and approval of personnel performing certain heat-treating and associated operations that could have a material impact on the properties of materials being heat treated. It also recommends that only approved personnel perform or monitor the functions listed in Table 1.
Standard
Training and Approval of Heat-Treating Personnel
2007-05-01
HISTORICAL
ARP1962A
This document requires that the company (facility) employing the personnel ensure a verifiable program of on-the-job training, experience, education, classroom instruction, and evaluation of personnel using either company-created programs or programs described herein.
Standard
Toluene, Industrial Grade
2015-10-14
CURRENT
AMS3180G
This specification covers, industrial-grade toluene in the form of a liquid.
